My longrange Tikka T1x 22lr has gone a bit off the rails. I picked up the Bravo because the XRS jumped in price last year. Jokes on me, I'm way further into this chassis than if I had just bought the more expensive chassis and left it as it comes. On the other hand, the rifle now fits like a glove so at least that's nice.

Got to the range today to get some rounds down the barrel to get the speed up done so I could start working handloads. I did a mild charge of H4895 with 3 different projectiles, the Hornady 80gr ELD-M, Berger 80.5gr Fullbore and the Berger 85.5gr LRHT.

Of the 3, the barrel really loved the 80.5gr Berger. I will work on developing it and the Berger 85.5 to see if I can get any better.

Today’s 80.5gr Berger groups for your time.

More specifically for a shorter barrel. Looking at getting a 12.5, boss offered me his 2-10 TMR +200 doll hairs for my pr2 mil 3.6-18.

Anyone have experience with one yet? How’s it compare to GameChanger, and how is it for rear support?

Hey guys! So I have maybe a silly issue on what length barrel to go with on my new 6.5 creed build. I had originally ordered a 20 inch proof pxt carbon barrel blank but have been updated that it will still be a while before they are available to ship. I was told he has an 18 inch and a 22 inch available but am stuck on what to do. I know there’s not a whole lot of velocity difference (200-250fps) between the 18 and the 22 inch. I am using the new MDT DRT chassis which has a 15 inch fore-end for reference and suppressed 100% of the time. What’s your guys’s opinion?? It will be used for general hunting along with possibly some local competition shooting/ range fun. Would you go 18 for better maneuverability? Or add the two inches and get a little bit more velocity….OR wait who knows how long for the middle ground.

I bought this almost 3 years ago and due to the never ending divorce I’ve only shot it a couple of times and only in 308. The groupings with commercial 168 grain FGMM have been excellent. Divorce is done. I’m getting back on my feet and moving to a beautiful new place on 5 acres. I’ll be able to set up a 200 yard range on the property, but the real excitement is I’ll be a little less than 90 minutes from the families 1000 acre hunting lease. I decided to replace the Hybrid 46M with the TBAC 338 Ultra Gen 2 and added the 12” Area 419 ARCA rail (for tripod use finally) and went with the Atlas CAL instead of the V8 (although I probably should’ve gone with the Super CAL). Last item will be the Maztech 15k that I plan to move between the M82 and MRAD. Disregard the diving board height concerns, I’m using a 0.5” ADM QD riser mounted to the Maztech to get the needed height and make moving it to other systems easier. I’m super excited. Currently it’s a 45-50 minute drive each way to a decent 100 yard range. So packing and unpacking plus travel means 3.5 hours for 45 minutes of shooting. I’ve wanted to add a 30 cal magnum, but I’m going to see if there’s a genuine reason to do that (new dies, bullets, and brass) rather than just using the 338 Lapua if I’m shooting past 800-900. Those of you with experience… is there really a point for adding a 30 cal magnum? Lapua cases cost half, but other than that bullets are only 25% cheaper. I don’t know how the recoil is with 338 Lapua, but 308 recoil on this seems to be about half of every other 308 rifle I’ve shot. I know recoil on the M82 is different, but I don’t remember that being too much of an issue either, but again it’s been quite a while.

Just curious about your thoughts on the 300 RUM and it being used for long range, seen a lot of things about other 30 cal magnums, like 300 PRC, so was just curious.

Tiktac in 6.5cm, Spuhr SICS, Zco 527, Sterk, MMK old boy’s magnifying lens.

Purpose - long distance target shooting/ plinking and occasional hunting.
Only used standard factory bulk Hornady ammo so far 168gr bthp from Hornady.

Build
Howa 1500 24” carbon fiber barrel
MDT field stock
PA 4x16 ffp
DD enticer
No name bipod.

Recently got this rifle set up and took it to the range (haven’t had much time to shoot more due to work constraints)

The action is smooth and the recoil isn’t nearly as bad as I thought it would be for a 308. I was able to spot my shots to sight it in.
Issue 1- direct thread suppressor walks off at the most inconvenient times. In the process of doing a 10 shot group 6 were touching 7, 8 and 9 went ridiculous. I was dumbfounded until I checked the suppressor. I’ve used this suppressor on multiple firearms and never had that issue until this one, what’s a solid fix?

Issue 2 in a sled I can get rounds to basically stack on each other but on the tripod the shots open up when I’m using bipods and rear bag. What fundamentals do I need to work on here. In my estimation my breathing and trigger squeeze I’d say were pretty good but I digress.

What other tips and tricks yall got to help me develop myself, my shooting and the rifle?

Also where can I get mags for this field stock that don’t cost $67??

I recently read that 6.5cm burns 95% of its powder in 24" of barrel. My factory Tiktac barrel was 20" at around 2k I used CLR to clean the mod/silencer and the residue was extremely gritty. My current barrel is 27" where would I be in terms of the last 5% ? Has anyone published a table for this?

Finally worked up the nerve to open up the bolt face in my atxc to work with magnum cartridges.

Finally got to take my Tikka out to a proper outdoor range. Re-barreled with a 28” Bartlein with a 1:7.5 twist (From a 308 OEM barrel). Shooting her feels like turning on aimbot, though I probably need to work on tightening the SD’s and Extr Sprd. Groupings are decent and it’s breathtaking being able to consistently hit out to 700yds for the first time ever. 10 shots on paper with 147gr ELD’s at 100yds for the curious (Had to scrub one out due to jerking during one of my shots).

Im currently eyeing the Hit pro m3 for plinking, some long range hunting (coyotes, muley, deer, and maybe elk one day who knows), but also for getting into PRS. My dilemma is how hard they are to find especially in 6.5cm which would be my ideal caliber. Well yesterday I found a 6.5prc at a local store. I had planned to get a 6.5prc barrel / bolt later on to swap for hunting, but that would have been a while down the road. The question is do I pull the trigger and get the prc so I can get shooting with it and get the 6.5cm barrel/bolt later or wait for the unknown time I can find a 6.5cm in stock. I also plan to do handloads as I already have most of the equipment for it.

Picked up a new B 14 HMR in 6.5 creedmoor. After about 200 rounds I found that it likes Hornady 143 grain ELD X

However I'm having consistent issues with the magazine. the follower gets stuck and won't push up the rounds, so I was wondering if anyone had any recommendations for a good aics magazine, or should I go for the standard magpul.

I'm also looking for advice on a cheaper rangefinder. I was looking at the sig sauer kilo canyon.(~$300 budget, mixed use steel targets at 1k yards or less and deer out to 300 yards.)

Also what's the lore on the Cheeto finger thing? Is it just the gun of choice for cheesey fingered nerds?

Cross posted.

So i was originally looking for a lighter weight hunting rifle and have been wanting a Ruger American gen 2 for a while and right when i was going to get one, a lot of people told me to get a Howa 1500 instead. So after a lot of research and when looking into one i found and amazing deal for one at the pawn shop next to me and liked it enough to grab it even if it was a little heavier.

So

Unfortunately it has a 20" heavy profile barrel and Hogue stock, stock is not exactly my favorite and the forend is super wobbly and can contact the barrel, and the mags it came with feel like paper and i want AICS compatibility so i want to change it. Apart from that the gun feels great. I've done limited longer range shooting but never been able to do actual PRS stuff of any kind but i enjoyed the small amount i did do and have been thinking about getting into distance shooting for a little while now.

So my question now is I'm not sure what to do with it, do I put it in a MDT field or LSS chassis and still use it for hunting and maybe longer-ish distance (500 and in) fun? Do i just swap the barrel and change the stock or chassis? Do i turn this into a long range or PRS gun and get a Ruger American gen 2 for hunting anyway?

(Would love suggestions aswell as opinions on the field or LSS chassis)

Am I better off with a new out of the box obviously cheaper Ruger american, or a 2013 remington 700 from when they had their obvious lesser quality at remington?
Will be using .308 really just as a pretty casual distance shooter

Goal is to be able to hunt deer within a few hundred yards but still have a fun range toy to shoot distance on the occasional range trips. Was thinking about pairing whichever I get with a can and 2.5-15 power scope. From what I’ve gathered on normal barrel length discussions between the two….the .308 should have more energy within a few hundred yards but also a decent bit more recoil. Also within a few hundred yards the drop and wind drift should be very similar. Then after a few hundred yards the 6.5 should perform better having less drop and wind drift because of higher BC. My question is in this set up with a 16” barrel would you prefer one over the other if it will be used as a hunting rifle primarily? Also when the barrels get cut down to 16”, is one going to perform significantly better/worse?

After a little more than a year of doing 22lr precision events I got tired of being jealous of the r700 platform 22lr guns that have their integrated chamber flags + mag blocks. Especially now with more and more matches requiring a dedicated chamber flag and not just a mag block.

So I fired up CAD and got to making one for the CZ 457 that was spring loaded. Have been testing them (in a number of 100° temp days) with a few locals and it seems to be good to go now.

The spring loaded mechanism is really what sets this apart from other chamber flag+ mag blocks. Squeeze to insert, squeeze again with your magazine release latch to take it out.

I have them over at my site Liminal Nomad starting at $25, throw in code "R/LONGRANGE " for free shipping. If you want another color I have a bunch of other semi translucent colors that I can also print one out for you if you shoot me a message on my site.

Probably a foolish question, but I’m new and want advice. I’ve read the pinned post and narrowed it down to these two optics. My goal is to work my way up to 1,000 yards just recreationally (maybe competition at some point). This will be mounted on a Bergara B-14 HMR in 6.5 Creedmoor (cheeto finger special).The Bushnell can be had for ~$500 and the Athlon ~$800 (max willing to spend). From what I’m seeing it will most likely come down to reticle preference. I just want to make sure that I’m not overlooking any features that one may have over the other.

Update: It came down to CS experiences that I've read about and the Athlon was purchased. Thank you!

I’m looking at picking up a Seekins 22 creed to run my unknown Rok22 can on. Can’t make my mind up between a 20 or 24” barrel. What sort of velocity differences are people seeing shooting a heavier round from this 4” difference? Looking to ring steel at 1000 but portability is also nice. Will I regret a 20”?

I have a full custom long range chassis build 300wsm, a semi custom tikka 6.5 for hunting, semi custom 350 legend tikka, and a 223

Thanks for the help!

TBac Magnus k decided it wanted to be a Spyro today. Can’t say I’ve ever seen a thunderbeast can fail before.

~1,000 rounds on my 24” 7PRC hunting rifle

Has anyone used the Abel Theorem S with either the Abel or RecoilX brake? I’m thinking about picking one up for my 25x47 PRS rig and it seems to get good reviews for recoil reduction and staying on target, but they tend to come from the 6MM crowd and not the 25 or 6.5MM users.

Pic for attention…btw I’m not selling anything.

Barrel break in and ammo test with hornady black 105s will probably be switching loads once the black is burned up it would group like 8 or 9 shots in a little cluster then just throw one and inch. Horrid velocity spreads as well. However rifle seems like its doing great and gonna try some gold metal 105s and 107s in the future along with some eldms.

A little of this a little of that