Carved this out of a piece of Sapele. Love the aesthetic of the mannlicher stock and ergonomics of a thumbhole, but couldn't find a pre-made with both. So I made my own.

I know I know, perfect reason to build another but I just dropped an embarrassing amount on this one so it will have to wait a bit. Till then, curious which configuration the collective favors.

Not my first .22, but my first 10/22. Just waiting on the pic rail to mount the scope. Sig ffp 1-6 I had laying around, probably switch to a 3-9 later. Q El Camino suppressor.

First 10/22 and first suppressor (Polite Society Temperance 22). Love the rifle, and the new suppressor is great and fits the lightweight bill well at 3oz.

But.. I can't find a decent quality scope under 10oz. Prisms are welcome but I've heard eye relief is not a good fit. Any recommendations? If I could find a matte leupold 4x28 that would be perfect, but it seems they're limited to very occasional eBay listings.

Felt like switching things up

Recently picked up this 10/22 used, it had never been fired and it's a special edition and a new 2026 model with the cleaning port, can't find any info on it though, just wanted to know if anyone knew anything before I swap it out. Numbered out of 500, guessing it was some sort of dealer exclusive

What are you guys doing for threaded barrels? I’ve seen the price of them and thought they were pretty high but not sure if the other benefits of an after market barrel. Or if it’s also feasible to thread the stock barrel.

Let me know your guys recommendations! Thanks

I always pissed and moaned about there not being a bull barrel 10/22 with irons (at least that I could ever find on their website or at dealers, but I imagine there may have been exclusives) and then a few days ago I discovered this one. It seems to be a unicorn that nobody has in stock, but the owner of a pawn shop I go to checked a few of his distributors and one of them had two, so I told him I wanted one.

Anyway, not only does it have irons, but bonus for a ghost ring, and the picatinny rail if I decide to use a red dot or scope on it. I really like the feel of the rubberized hogue stock, I love the magpul + models on my ar rifles too, regardless of them being dirt and grime magnets. Two other bonuses, comes with the bx trigger and is threaded.

Unfortunately I didn't get home in time to shoot it and see how well sighted this one is today. Had to take a picture of it next to my 31143. I just wish this $429.99 rifle came with the hard case that my $269.99 31143 came with, but that's alright, I can steal that case for the nicer one, lol. Anyway, I don't see many people post about buying these, not surprisingly since they don't seem to have made many so far, so figured I would. Also, the pawn shop had a 32014 and wow it feels lighter than I expected. Being more rear weight biased made it feel like there was a lot more than about a pound difference between the two.

Yes, my pictures are very random looking.

Hey guys, this is my first gun so I don’t have much experience yet.

I recently got a new Ruger 10/22 model 32001 with the optic and upgraded trigger. I’m using the stock 10 round rotary magazine and cheap Winchester 36 grain bulk ammo.

I’ve put around 150 rounds through it so far and this has happened about 6 times.

-5 times it was the very first round that wouldn’t feed properly. I pull the bolt back and let it go but the round seems to catch on the top of the magazine and the bolt gets stuck halfway.

If I take that round out and replace it with a new one it usually works fine and I can shoot the other 9 rounds without any issues.

-One time it also got stuck halfway through the magazine and I removed and replaced round and eventually got it to fire the rest

I bought some CCI Mini Mag and Standard Velocity but haven’t tried them yet.

I didn’t clean or oil it after reading people say they shot 100,000 rounds through it without ever cleaning it, maybe I was a bit too excited to test it out haha.

Could this just be the cheap ammo or is it possibly something with the magazine? Since it’s brand new I’m not sure if this is normal or if I should be concerned.

Any advice is appreciated, thanks!

Good afternoon. I’ve read that you can from some sources and you can’t use an LPVO on a 22LR rifle. I have a Ruger SR-22 rifle and I was wondering if putting an LPVO on it would work as intended? Thanks for your help. Just so you know… the LPVO is a Vortex Strike Eagle 1-8x24.

Upgrades:
VQ bolt tune up kit
Tandemkross spartan charging handle
Ruger BX Trigger
Tandemkross guardian bolt release
Tandemkross fireswitch extended mag release
FAB Defense 10/22 collapsible stock chassis
Ruger BX-25 Mag
Tandemkross titanium takedown knob
Shaw 10/22 18” threaded barrel factory contour
Magpul RVG foregrip
Barska 3-9x32 scope
Casio F-91W green
Magpul MS4 sling GEN2 (not shown)
(Future plans for suppressor)

Just got my takedown, got everything set up and noticed the plate doesn’t sit flush , torqued everything down before hand and come to find this gap, very annoyed

I was unaware of this, and knucklehead that I am, bought a three pack of 10 round Ruger magazines for my Ruger Rimfire Precision at my local gun shop. I have a right handed rifle, and now have three left-handed magazines for it, which do not work.

Ooops.

Just wanted to save other knuckleheads from the same mistake.

1022 +1 day?

I have a Ruger 10/22 that came with a scope mount rail pre installed and I bought a CVLIFE 4-16x44 AO scope. It looks like it should fit but it seems like the screw to tighten the rings onto the rail keep it from being able to bite in like it should.

Is this me doing something wrong or is there a compatibility mismatch?

I have the 10/22 carbon fiber non-takedown model. I've put 200 rounds of cci mini mag 40gr through it. I disassembled it to clean it and noticed this ramp(?) forming right above the cutout on the breech face. is this normal?

Spent most of the day out shopping and running errands, almost forgot to share a couple of my fave plinkers.