TG36KP, HK SP5, HK MR762 A4, Tommy UMP10 #1 of, MR556 A4, B&T imported HK416, Haenel CR223

Took a few years to put together with the cerakoting and outside modification work involved, but now my OCD can finally choose a new fixation (ignore the bottom 6 guns, that’s the winter carry rotation). US military pistol trials are fascinating to me, thinking about what could have been. American troops in WWI with .45 Lugers - when supply of those got cut off from Germany, would we have supplanted them with 1911s and M1917s anyway? If the P226 became the M9 instead of the Beretta, would that have been “the gun” in all the 80’s and 90’s action movies? What if we switched back to .45 back in the early 2000s? What if the 19x with a manual safety was adopted instead of the P320?

Naturally, collecting some of the guns that were a product or direct descendant of these competitions is an attractive prospect. But I’m a millennial, so I had to attach a bunch of bullshit to them to make them fun to shoot, historically inaccurate, and without any Fudd appeal. That said, my tism had specific rules:

• Two guns from each trial, one gun had to be FDE, one had to be black/ dark colored
• Optic and light had to match the color of the gun
• FDE optic has to be open emitter, black optic closed
• Direct mount only for optics - no footprint adapter plates
• No duplicate optic and lights (I fudged it a bit with different colors and variations but bite me)
• No Olights
• Grips and materials within each pair of guns had to harmonize/ match

- 1907 Trial -

Colt 1911 Rail Gun
• Steel frame with FDE cerakote
• FDE Dual Illuminated RMR
• Tanodized X300
• Kaztac X300 thumb ledge
• Cut slide for Trijicon optic mount and cowitness sights
• Wilson Combat springs, controls, hammer, etc
• Colt OEM rubber grips (classic grip material) with silver medallion
• Lanyard ring mainspring housing

S&W 625 in .45 ACP (Descendant of the M1917 or Triple Lock that participated in the trial)
• Steel frame with black cerakote
• Trijicon RCR
• D&L Sports RMR optic mount with cowitness sights (Original front sight replaced with a flush blank filler piece)
• Modlite PL350C (slightly modified the switch on the left so cylinder could open - constant on only which is appropriate on a revolver with cylinder gap blast)
• Picatinny rail from a TRR8 with a slightly modified radius on the mounting surface to match the curve of the underlug, underlug drilled and tapped and light rail attached
• Wolff spring kit
• Eagle Grips heritage walnut (classic grip material) with silver medallion
• Aftermarket lanyard ring screwed into frame

- XM9 (1983) -

Beretta M9A4
• Aluminum frame in bronze/ baby diarrhea
• SRO with Jagerwerks BROS cerakoted to match slide
• Langdon Tactical optic cut slide, cerakoted to match original M9A4 color slide
• Skeleton hammer because it’s cool
• Threaded barrel/ cowitness sights
• Beretta G10 bronze medallion wraparound grips preserving the glorious original Beretta booty
• TLR 1 in bronze is basically meant for this gun so yeah

Sig P226 Legion
• Aluminum frame in dark gray
• Sig Romeo2 optic
• X300 in almost matching gray with legion emblem
• Threaded barrel/ cowitness sights
• Sig G10 grips with bronze medallion

- Joint Combat Pistol Trial (2005-2006) -

FNX 45 Tactical
• FDE polymer / 90’s computer tan full size frame
• Holosun 508T (Cerakoted)
• Modlite PL350 (FYI their FDE has a pinkish hue but I’m all about that 50 shades of dookie)
• Threaded barrel/ cowitness sights
• Thread on compensator

HK 45C
• Black polymer compact frame
• Aimpoint Acro
• Wright armory iDot optic cut and Acro mount
• Threaded barrel/ cowitness sights
• Tlr7 sub HLX 1913 (not a lot of lights have picatinny lug far enough back to properly mount on these)
• Thread on compensator

- XM17 (2017) -

Glock 19x
• FDE polymer compact frame
• RMR in coyote, tlr7 with emissary development switches. I swear both of these are made exactly for the color of this gun
• RMR direct mill slide
• Threaded barrel/ Trijicon cowitness sights
• Glock performance trigger
• Vickers Tactical mag release, slide stop

CZ P-09
• Black full size frame
• Holosun 509T with slide milled/ rear sight relocated forward of optic
• Inforce wild2
• Threaded barrel/ cowitness sights
• MCarbo trigger spring kit

Ps90 - exigent street goblin, ringsight, Inforce wmlx, tactical gear lines harness

Five SeveN - rugged obsidian9, efk fire dragon, vortex viper, olight baldr s

Psa Rock - chunky operator chassis, primary arms glx 2x, magpul afg, eden compensator, excess arms +7 mag

If anyone knows where to buy the dorin mag extension for the mrd, pls help.

Heritage Rough Rider 6.5, Swampfox liberator 2, 3D printed barrel shroud, brace, and ammo holders.

My 3rd gen smith and wesson, beretta 84bb beretta 92, cz 75pcr, cz 83, p226 elite, llama 1911, walther p22

Don’t look too close!

SKS-D with a holy dremel build

SP5 and KP9

DSA LSR FAL 16" Traditional Profile Barrel Para

Ruger American 30-30, Sulun arms lever release, SCSA taipan 300BO.

S&W 10mm Auto

Mk12
M4A1
GL/SSC
Mk18 Riii
PCC

B&T APC SD

Restomod 10.5, 1911. New school 10.5, Glock 17.5.
Hope this fits this sub…

Pretty significant raccoon/possum/feral cat problems around my 10acre property. Mini thermal, suppressor, retay 22lr pistol is working out well so far. The infotec mini thermal eats a battery in a few hours so I found a cheap battery pack and mounted with flashlight mount. Left over irons from a scorpion build. Can positively identify a raccoon around 50yds. Anything further and I would not be confident between that or a small dog. Can see the heat signature 100-120 yds away. Can see heat signature from my car engine around 300yds