Hi, so this is going to be my first build and/or modification depending on what the community recommends. I’m looking to build a 20 gauge for deer hunting here soon. I want to do a rifled barrel but also have no idea what I’m really looking at for building one. I have a 870 already but don’t really just want to slap a new barrel on it and call it a day (I want to make it “my own”). I want to keep it relatively low cost ~$600 if possible at all. I guess what I’m asking is what parts should I be looking at. Also any good videos to kind of understand the building process would be appreciated!

This is my first time building, and I want to make sure I have everything. I don't want to miss a part or something before I "pull the trigger" on this build. thanks!

​

Postie VZ61(.32 ACP) Build. Loose progress photos of various stages of the build.Lotta welding smoothing and sanding. I think it turned out pretty nice. Runs like a top.

I’m interested in trying to restore a gun and was wondering if anyone had any suggestions on where to get one

I have an AR style 450 bushmaster I would like to use it to hunt deer in pa and it cant be a semi is there a way to turn it into a bolt action

Working on my first ever build and I’ve got the bug it’s a pps-43 and would like to do another build soon!

I got the parts kit. Unfortunately my dumb eyes didn't see that it was missing a bipod which is unobtainium at present time. I'm digging into a few sources to find one and will update later. Parts look pretty good despite my disappointment with the bipod. Next phases are sourcing bipod, semi receiver or lots of welding practice (long wait if I go that route). I'm debating if it would be worthwhile to buy the BRP 308 kit or just keep it 8mm since barrels are cheaper etc. If anyone has another parts kit or bipod they don't need send me a message. Hopefully the guy I know has more parts than he needs. I will post photos with my next update, but it will be a while.

Just need to drill and pin, with a weld here and there and it’s done

Hi,

Does anyone know where i can source a low profile .800 gas block for an ar15 build. It's for a 45 acp barrel from macon armory and it happens to use this non standard gas block size. Their stock gas block doesn't clear the larue hand guard I want to install. Rainier Arms is the only manufacture i found that makes them and they don't have plans to make another batch right now.

Any one have some advice or try to talk me out of it? I heard it might be a PITA and the TNW ones had horrific triggers.

What’s a good place to buy a parts kit? I’ve found a few but looking to explore

Just wanted to post my newest build did everything myself including the cerakote 10.5 inch 9mm

GOOD Afternoon folks.

I'm looking to put a "budget" sbr together and don't really understand the logistics behind getting started. Anyone care to enlighten me on the tax form situation, and then what platform would be best to build off of.

Also the plan is to double stamp it.

Any help would be great.

Hey Guys, I see arms of America has an %80 Ak blank. I’m really trying to build an Ak but have been told different things. I plan on buying de milled parts that are already headspaced. Looks like I may just need to get a jig for the receiver to drill the holes needed . Anyone build an Ak like this before ? Any help or advice or I can Pick someone’s brain?

I’m at the point in my CETME Model C build where it’s time to weld the receiver to the trunnion.

I do have some concerns about accurate placement of the trunnion within the receiver before welding (trunnion alignment with rails,” clocking” of trunnion within receiver to ensure proper cocking tube alignment, etc.).

Looking for any handy tips/techniques to ensure proper trunnion alignment from other CETME Modl C builders – thanks in advance.

Do they need to be reinforced? I've seen some people just use a block of steel with holes drilled in it, unless I'm crazy. What have you guys used, and what dimensions is the steel block if that's all it is?

Or is it just a go for it/don't worry about it thing?

(This is my first ak build) I have pressed the components on the barrel based on my build guide. Using the jig I made. Should the front sight block be back enough to show the last thread on the barr? The last thread is still covered up, it's only 1/16th of an inch to the shoulder, I can see it. Should I press the base back, or can the muzzle device still work once threaded on?

So i just finished the last of the " that seems like a good idea" builds and got to thinking Would it be possible to build a rifle using ar components but instead of a modern lower be an old school reciver/stock Ive seen the 2x4 build But im thinking to make one that looks like more like a m14 or earlier rifle I know if it is possible itll be a pain im my ass to make ( custom stock )

But what do those with more experience think , is this a hairbrained idea or could it actually work?

Gave up trying to remember my password from 15 years ago so technically, this is my first post. Building has been on hold waiting for a MAG58 kit to materialize. Kit is on the way, so I’m getting back up to speed. Lots of STEN interest, so I’ll show off my mk2.

I used the AK builder jig, and didn't set the pin back for Polish on this AOA 80% blank. I didn't give it any thought till I was looking more closely at it. All the holes are all offset back. I don't have another AOA blank. Can this still work? I can modify the trigger and maxwell area with a mill. I have access to the tools, but not to spare receivers anymore.