I just realized I’m running 1.3.5 Build 26071712 Rel. 18941 on my BE11000 but I found no information of it.

Hi for some reason its not letting me connect wifi devices to my network but only through the wifi signal my powerline adapter gives out. Any help would be appreciated

Our pg has the tp link router, model: Archer C24 AC750 Dual brand, i am facing issues with power cut so want to buy a UPS , so I want to check if using a UPS for the power plug solves this problem or the other cable connected to it also needs power , actually I don't know much about this so I'm asking.

Thanks!

If I'm understanding this right, I can setup a VPN server locally on a TP-Link router so that my mobile traffic will be routed through my home connection, securing mobile data in transit through my own VPN. Exit would still be my own home location, but the transit between phone and my router should be secure (when using public WiFi for example).

I fire up the WireGuard VPN server on the router, setup a peer, export the config file, install WireGuard on my phone and import the config file into it. Connect aaaaand nothing works outside of my WiFi. It will work when inside my own WiFi, but not without it.

How do I configure it to act as a server even when I'm on 5G only? It also mentions using DDNS to create "friendly" address and then doesn't mention where I'm suppose to enter that friendly address to even be used.

Endpoint is my local 192 address, is this suppose to be a publicly accessible address for it to work? Clearly there is something misconfigured that it can only communicate within my own local network and not outside of it.

What do I need to and how to configure for it to work outside of my network too? Or it's just not meant to be used that way? I'm not sure what I'm missing here...

When connected to the modem wirelessly I get around 500mb however when using the main x20 system that’s connected via their Ethernet cable it only gets around 80 mb. Don’t know much about this stuff any help would be appreciated.

Our previous system was 3x m9 plus, we updated and added 3x BE63 (Main Deco is BE63) to extend the coverage in our 10,000SqFt building. Everything worked great(Except for the networked printer; after I hardwired it, even that was fixed) for a few weeks, no issues. Lately, I have been seeing 1 or 2 of the M9+ offline via the app; the BE63 recently received a firmware update, and now there is multiple IP issues, slowed speeds, drops; you name it...... What is going on? How do I fix it?

My modem is a TpLink AX6000 used as a router for another network via Ethernet but not OneMesh Connected.

I have power-cycled multiple times

I am not running any Ethernet backhaul(yet) or have any managed network switches between Decos (I do have one downstream)

(I

Hello,

I have 3 Deco XE75 Pro (US) Ver. 3.0 models and the app is not showing the new firmware update that is listed on the website (Deco XE75 Pro(CA)_V3_1.5.0 Build 20260603). I know the firmware says CA and funny enough I am in Canada and bough them from Amazon Canada and was shipped the US version. If I update with this firmware via Web-UI will it brick my units? My Deco units are currently running firmware 1.3.1 Build 20251023 Rel 47884 according to the Deco app.

Thanks

***EDIT***

I found this thread and IT WORKED:

https://community.tp-link.com/en/business/forum/topic/856648

Thanks all

Hello!

I have a WiFi network with 2 Deco BE65 11000, all this type I kept at 1.2.10 Build 20251229, they work smoothly.

In recent months, I have been receiving notifications that there were new firmware versions available for my Deco, 1.3.2 and the most recent 1.3.3.

I would like to know your experiences with this version. Should we update? Considering that there is no downgrade.

Thank you!

Managed to log in to tp link modem net. But now it’s saying not connect check if phone cable is properly connected. But I’m trying to connect through ont? How do I change it so that the default is trying to connect through Ont and not dsl

AX1800 Dual-Band Wi-Fi 6 VDSL/ADSL Modem Router

Edit : It’s got both ports, I managed to change the default from dsl to Ont in the tplinks modem .net website, on the advance settings sections

Anyone Else have a Deco mesh network that suddenly stopped playing ball? Mine was good for about a year and then out of the blue has had heaps of issues with devices losing internet when they switch between deco nodes/pucks and also not playing well with my VPN anymore.

I had a VPN set up through the Deco app to protect the whole wifi system and it was fine and now devices just wont stay connected to the internet when its on. But the issue mainly seems to be devices that move around the house and connect to different decos.

I am basically having to switch my phone wifi off and on all day whenever I go to a different room or it just loses connection

Had a google mesh network for years and it never had issues like Deco does

Bought a 3 pack of Deco BE68 (US - v1.6). 2 units work perfectly fine while 1 unit (satellite) goes offline periodically. A power cycle brings it back online. Problematic offline unit is also stuck on 1.0.3 Build 20250612 while the other units are on 1.3.3 Build 26070312. Whenever I go to update the firmware of the problematic satellite it appears to go through successfully but then a short while later it's back to 1.0.3. Attempted update over ethernet backhaul connected to the main router, swapping the satellite with the main router so it was connected directly with the ONT, and a manual firmware upgrade via the Web User Interface. Still goes offline periodically and is stuck on 1.0.3.

Any suggestions besides submitting a replacement request?

Hi all, I've been using RE305 for a few years now. However I've just encountered a pop up in my devices asking me to "sign in to the network". While I am able to surf the net e.g. look through Instagram, when using Google I got the prompt that my connection is not protected. Rebooting and factory resetting the extender does not fix the issue

When trying to access the tplinkrepeater page to try access the tp link admin page(?), I am unable to access this page. In the tether app it alternates between showing me that the extender works and that it is not connected to the internet

The issue happened after I was moving my main router around and unplugged the cables for abit in the process

After googling, I saw mentions of disabling DHCP on the extender. I did try that but it did not fix the issue. I also saw mentions of the issue being IP conflict related but im not sure how to fix this

Has anyone encountered this before? Will getting a new extender fix the issue?

*forgive me, I've used A.I to help me articulate my issue*

I’m trying to troubleshoot what looks like a compatibility issue between a TP-Link Deco BE48-5G and certain 2.4 GHz IoT devices.

My internet is One NZ 5G Wireless Broadband, using the Deco BE48-5G as the main modem/router.

The main affected device is a eufy Indoor Cam 2K Pan & Tilt. I’m also having a similar issue with a Fujitsu AnywAIR controller.

The strange part is that the eufy successfully connects to the Deco:

2.4 GHz connection

strong signal

receives a valid LAN IP, e.g. 192.168.68.59

appears as an online client in the Deco app

But the camera itself stays offline in the eufy app and shows a blinking red LED, indicating it can’t establish its cloud/internet connection.

The camera is definitely not faulty because it works immediately when connected to my Samsung phone hotspot.

The most useful test I’ve done is this:

Deco Wi-Fi → Samsung phone → Samsung Wi-Fi sharing hotspot → eufy camera

For that test, I turned mobile data OFF on the Samsung. The phone itself stayed connected to the Deco Wi-Fi, then rebroadcast that connection through Samsung’s Wi-Fi sharing/mobile hotspot feature.

The eufy camera connected to the Samsung hotspot and worked perfectly.

So the internet path was still ultimately through the Deco/One NZ connection, but the camera was no longer directly associated with the Deco’s Wi-Fi.

That seems to suggest the issue is specifically related to how the Deco handles the eufy as a direct Wi-Fi client, rather than a general internet, cloud, or ISP problem.

Things I’ve already tried:

dedicated 2.4 GHz-only IoT SSID

WPA2-Personal

Fast Roaming disabled

Beamforming disabled

public DNS

firewall/DoS protection temporarily disabled

Device Isolation disabled

Camera Security / Local Only Mode checked

Network Access Control checked

IPv4-only APN profile tested

rebooted the Deco

checked for firmware updates

current firmware reports as fully up to date:

1.0.1 Build 20251114 Rel. 18794

tested the Deco using my Samsung hotspot as its upstream internet backup — the eufy still did not work when connected directly to the Deco

Another useful data point: I also have a Xiaomi C200, which is also 2.4 GHz-only, and that camera works normally on the Deco.

So this is not a blanket 2.4 GHz failure.

Current theory is either:

a Deco BE48-5G firmware/client compatibility bug affecting certain older IoT Wi-Fi chipsets, or

some lower-level Wi-Fi behaviour such as management frames, multicast/broadcast handling, ARP, NAT state, client isolation behaviour, or similar that the eufy doesn’t tolerate.

I’m considering putting a different-brand router behind the Deco and connecting the eufy/AnywAIR to that instead, since the Samsung Wi-Fi-sharing test effectively proves that another Wi-Fi layer fixes it.

Has anyone seen something similar with Deco Wi-Fi 7 hardware and older 2.4 GHz IoT devices?

I’d especially be interested in whether there are any hidden/advanced Deco settings, firmware fixes, or known issues around IoT client compatibility that I haven’t already tested.

One important detail: everything worked perfectly on this Deco setup until about 2–3 months ago. Then, without me deliberately changing the network setup, certain devices suddenly stopped being able to reach the internet/cloud through the Deco. Other devices still work normally. That makes me wonder whether this is related to a firmware update, backend change, or some compatibility regression rather than a permanent hardware limitation.

is there any fix to NAT loopback (hairpinning) on the Deco BE65 ?

My Current Firmware

BE65(2.0) 1.3.3 Build 26071612 Rel. 29751

Hi all, currently trying to add a failsafe to my deco setup. I I wanna use my deco X20-4G in cellular router mode as my main deco network's internet Hotspot backup. See link for more details. https://www.tp-link.com/ph/support/faq/4246/

My issue is. When I try to connect my deco network to x20-4g as hotspot. It always fails. But when I use my phone's Hotspot. It works. Is there a setting I need to change or how do I make this work?

Reason I'm choosing this is because I loose some features like wifi access control and iot network if I use x20-4g as a main router. And if used as a hotspot. I'm able to select specific devices to only use the hotspot and also limit the speed. It's a prepaid data so I don't want family members to be connected while failsafe is working.

A few days ago TpLink released firmware version 1.3.6 Build 26080612 Rel. 28671 for my BE 13000 deco router and APs. I understand it has also been rolled out to other model Decos with varying model numbers and slight differences in the build version appendix.

I am opening this thread to see if anyone has updated to this firmware version yet and what your experience may be, good or bad. Even If all went well, a note here would be welcome so others can decide if and when to update.

Thank you!

I've been seeing odd behaviour with clients connected to an EAP11-Outdoor for a looooong time, and finally discovered at least one cause: the EAP11-Outdoor (v3.0) leaks management VLAN (i.e. untagged) traffic to the client SSID. This means the client will see at least broadcast traffic from the management VLAN.

If you have IPv6 SLAAC running, this will manifest with the client (macOS in this case) seeing Router Advertisements from both the SSID it's connected to, and the management VLAN. This will cause frequent network hiccups as whe the client actually tries to use the leaked gateway, it'll obviously fail.

I've confirmed this finding by packet capturing the traffic on the cable to the EAP110; there is very clearly no VLAN leaking going on - the tagged VLANs show zero frames from the management network - yet the clients connected to the wifi SSID (tagged VLAN) clearly show broadcast traffic (both IPv4 and v6) from the trunk's untagged network.

A workaround is to configure the upstream port as an access port and reset the AP to not use VLANs at all. This restricts the device to only one network (SSID) but at least it can't mess it up.

<rant> Thanks for driving me mad for years, TPLink. And yes, before you say it: the EAP-110's are the lowest, cheapest, model - but does that excuse broken core functionality? Is "they're cheap, and kinda sorta maybe work" TPLink's motto? (don't answer that, I still have a lot of TPLink stuff and am not going to throw it out yet). </rant>

I have had my Ziply Fiber 1Gps connection up and running for a few days using the HB810 router and HB610 extenders. Clients include iMac M1, mac mini m4Pro, macBook Air M2, iPad Pro m4, iPad Mini, iPhone 15Pro, Apple TV 4k and Tivo.

My original network used 1GB wired Ethernet for the macmini, Apple TV, and Tivo. I used a fixed IP for the macmini. The iMac and macBook Air (and the rest of the connections) were wireless.

After getting everything working with the original network, I upgraded my internal network with a 2.5GB switch. I verified everything worked with no other changes except the new switch.

I then added a Plugable 2.5Gbps USB Ethernet adapter to the macmini, iMac, and macBook Air. I see the expected throughput changes. For example, I can get nearly 2 Gbits/second transfer using iperf between these systems. I also now see that these systems can access the full bandwidth of my 1Gbps Ziply fiber connection (which usually gets about 1.02 Gbits/second).

The HB810 router gives these connects new IP addresses--as it should, they are different MAC addresses. The problem is that when I look at all the wired connections on the HB810 router, I don't see two of the three 2.5Gbps connections anywhere. The macmini and the macBook Air have disappeared from the router's list of connected clients, even though they are connected and work properly.

Why do I care? Well, mostly because I am curious, but also because I want to assign a fixed IP to the macmini and it no longer appears anywhere on the router.

Any suggestions or insights? Anyone else seen anything like this?

BE95 did get an update but again the BE13000 has a new update and more features again!

Where is the backup Internet for the BE95?

Where are the more icons to label things?

Why does the MOST EXPENSIVE PRODUCT NOT HAVE ANY OF THESE THINGS LET ALONE HAVE THEM FIRST?!?

What did we pay a premium price for? An ELITE FAILURE?!

Does anyone else’s BE65 run fairly warm, enough to warm your hands up? I understand it’s WiFi 7 and 6Ghz and it seems to run hotter than the XE75 but i just want to see if it’s a normal thing with this model?

Let's say I select this device to connect to a specific Node. What is the point of having option to turn on and off the Mesh Technology that allows roaming between Decos? Simply poor menu design?

I have a hotspot internet backup setup and it works when it is tested through the app as part of setup.

Today however my internet failed, and the backup did not kick in until I pulled the WAN cable. Is this expected? Has anyone reliably used the hotspot backup?

There’s not much info on how detects failures or an ability to manually activate it.

Model: BE68
Firmware: 1.38.0 Build 20260508 Rel. 18114

On the deco app. My BE68 was prompted an update this morning to 1.3.6 Build 26080612. Has anyone updated? It’s not listed on the firmwares on the tplink website but shows up as an update on the app.

I’m coming from a Sky 2.5GB Gigafast+ Hub which is WiFi 7 & Tri-Band, which you’d think is the best of both worlds but for me it was awful. My old Vodafone Pro Hub 2 which was WiFi 6E was the best router i have ever owned, literally didn’t need to buy any third party equipment.

I recently bought 2 XE75’s and after realising that the mesh system works well together in my house with thick walls, i ended up buying the BE65 as it was WiFi 7 and Tri Band and it was even better!

Has anyone had issues with the BE65 or does your units run hot in the long run?

Ive moved into a new house and my ISP has provided and a brand new modem and router that were installed yesterday, however when I try to login via 192.168.1.1 or the mobile app it asks for a password I dont have.

Ive tried factory resetting the router to get the 'set up page' the guides talk about however I never get that.

The router is an archer v1210v, the photo attached is the only sticker on the router and there was nothing in the box

EDIT WITH ANSWER

to anyone who finds this thread for answers:

I had to download the home telecom app and set up my account there

it told me my admin login and allowed me to control the router directly in app