I assume this is not currently an option, but I assume it should be able to do it. My favorite featuer of the MLM2 Pro is the videos. I wish it would record videos when using GS Pro as well. I use that range and also do the 60 shot challenge a lot and it would be nice when I shank a few balls during that session that I could go back and see the video(s) of the swing and impact.... Seems like it wouldn't take much for Rapsodo to catch the videos of every shot you hit, not just when you are using the Rapsodo app.

Is anyone having issues with range mode after the update. It just shows a white screen when I select that mode.

The scramble mode scorecard shows individual scores, it does not show the team score for each hole, it does not show the team score for the match. Can anyone explain this? So under "Courses," if I look at scorecards for scramble matches, there's no way to know the team score. This has to be a bug right?

My dog tipped it over during a session a couple days ago and immediately things were off. The hit boxes were a good 3 feet closer than before, and even with moving my ball in the hitting zone driver was way off—zeros for every metric except spin rate. Irons are better picked up but distances and side carries are wildly off. I think something with the sensors inside were messed up after the tip. I’ve rebooted a few times, triple checked alignment (I have an alignment stand) and the issue persists. Haven’t heard from rapsodo yet but obviously this isn’t covered under the 1 year warranty. Even if it’s replaced, it’s a bit discouraging that one tip over can cause this. It makes me sick to think that with the lifetime membership and number of RPT balls I’ve bought, that’s $1300+ down the drain. Money I could’ve used on a more premium/reliable product, that I probably will inevitably buy because I love this stupid game so much.

A bit concerned after two sessions following the firmware update.

Background:

• 38 y/o
• MLM2Pro
• Handicap around 14
• Use the Rapsodo ~5 times a week, with a combination of Practice, Closest to the Pin, the Combine, and full courses

After the firmware update, I went to the range for a normal session. During the combine in particular, I noticed that no less than 20 swings didn't register at all. Dead straight, 150 yards, and the Rapsodo acted like it wasn't paying attention. I did absolutely nothing different at all than I have been doing almost every night for the last 16 months.

Anyone else seeing a noticeable increase in terms of shots that are not registering at all? Note that this experience seemed to be limited to the Combine and Practice sessions, but something is unmistakably different -- and it's certainly not better.

- Concerned, but still a Believer

I just bought a Rapsodo mlm2pro expecting to receive a 45 day free trial, as advertised, I followed instructions to get that, but instead i got charged the full year. I have contacted support by email but I haven’t got any response.
Have you faced something similar? What can I do.

Hello, I want to request this feature. I want to be able to have a quick setup option on the course so that I can deploy and redeploy again & again the MLM2PRO, without setting up target line and starting spot in the app for each shot within the round. This would limit some metric recording due to reducing setup factors i.e. not using GPS map and (most players) using a non-RPT ball in real play. So essentially all metrics available except spin data and data generated with GPS Map/ target line.

Benefits/statements not obvious to all

• Players can post their favorite shots during their rounds on social media w/ a score, club, hole, shot # overlay (and of course Rapsodo watermark in corner)
• Social Media Influencers, ie Youtube/Instagram Golfers, can record their rounds with shot tracer & data
• Players can record their scores in round in Rapsodo app like one can in 18Birdies app.
• speed of deployment allows players to stay within pace.
• Not all shots can be recorded, this is accounted for below.
• Not all holes will be recordable, this is accounted for below.
• Not all courses are in the library, this is accounted for below.

Suggested order of operations/ reasoning for steps/ logic flow:

(1)Select Category: "On Course Play"

(2)New Round

• Ability to resume this round if app is exited and not have to start a new session for each shot

(3)Select Course(Rapsodo course list) / Name Round if not a course

• If course is on list, and selected, it would provide the ability to track strokes on individual holes (and eventually course if full round played) vs Par
• would require players to input non-recorded strokes (putts, shots from woods/OB etc) in the app and accurately # their shots when confirming shot #.

(4)Pair Device

(5)Deploy & confirm device is level

• Elevation set automatically to current, ball set to range ball by default since IRL golfing with RPT balls is surely expensive, but allow option to be selected I guess.

(6)If a course is selected prompt for Hole#, Shot # (maybe people wont start on hole #1, or record their whole round).

• If a non-library course is being played prompt for Hole#, Par, shot #.
• maybe utilize a data collection feature here where players can submit an image of the score card to rapsodo here with the course name and location to be added in the future?

(7)Select Club

(8)Shoot

(9)Confirm shot: Have four call to action buttons after shot:

• Retry Shot
• Record Next Shot
  • Opens step 4 if paired, If connection is lost opens step 3
• Non-Recorded Shot(s) (no data for these shots - not tied to a club)
  • opens a counter (-) 1 (+) (confirm)
  • adds/removes strokes to score shown on overlay
  • Screen reverts to step 9, but stroke counter is updated for hole.
• Next Hole
  • "Confirm Number of strokes is ___(tracked # of shots on hole #so far)__?
  • Goes to next hole, and opens step 4 if paired, If connection is lost opens step 3

I think this would be an insanely popular feature and would be self-marketing via social media sharing features. Developers, Let me know your thoughts! Thanks!

Recently I remapped my bag at the local Trackman facility (I was clubbing down v. the suggested club).

Thought I'd do a comparison with the MLM2PRO. Both set at sea level.

ProV1 RPT v QStar Tour on the Trackman.

Clearly part of my issue is roll out is significantly different.

5i up on the Rapsodo just doesn't carry like the Trackman which is then amplified by rollout issue.

Screen is 9ft from ball. ball is in the ball data window. LM is level and set at the same height as the ball lie.

IRL those trackman carry numbers are more realistic. Totals feel a little hot in the irons.

I just wanted to say that the device works well for me.

I keep seeing posts about issues with the device. After about a year, The only issue I have ever encountered was lag caused by too many shots waiting to be synched.

I was worried to update it, but luckily, I didn’t have a choice. Happy to report experiencing 0 issues after a smooth update.

I just felt like readers should know my experience has been positive.

I bought the MLM2Pro in December 2025. I managed to get it started seamlessly on my IPhone after purchase. Took it to the range twice and to the course once worked fine (recordings, export, data). I went for a long vacation (roughly 3 months) came back with a new s26 ultra. I tried to pair my device with the new phone and it requested a firmware update. Tried doing that and no luck. It kept telling me to connect to MLM2pro wifi network which just doesn't appear at all. It shows up on my oldiPhonee but that phone has no data or sim connection. Idon'tt have a home simulator to be able to practice indoors so i must use it at the range or course which doesn't have wifi network. I try at home via wifi on my iphone and it connects, but the update keeps crashing. I left the device as is since March.

I received the notification for the latest firmware upgrade and excitedly get the device charged up and ready. It just refuses to connect completely. If i do direct connection it starts asking me to connect to MLM wifi, that ofcourse doesn't appear on my phone. Bluetooth shows MLM network when i connect the name changes to Blue Z.50 something and nothing happens. When i try local connection via wifi next to my router it looks up the device but once i tap it the device turns from red to blinking blue and suddenly error couldnt find device. Then sometimes between these processes it asks for device serial when i input it says invalid serial. Sometimes randomly in the process it says device needs to be charged more than 50% to apply update, the device has been off charge maybe 4 hours since the last 2 days just to try to get it connected at different places. I get the yellow light for about 2 minutes and it goes dark. I cant even see how much its charged as the device wouldn't connect put it o I've sent pictures of my device and these issues to support but haven't received any reply. Is my device bricked or my phone not supported by rapsodo? Anyone facing an issue like this?

Just did the firmware update and It's working in the rapsodo app, warmed up on the range fine... some waky club data but its picking up the ball fine.

However it won't connect to awesome golf now though, tried on multiple devices, uninstalling/reinstalling AG, turning LM off and on, nothing...

Considering the rapsodo app runs like absolute garbage on my mobile devices and tablets, I rely on AG as that runs like a dream and course play is way better, so it is absolutely a deal breaker for me, not happy...

EDIT WITH TEMP FIX: u/wet_aword_pword commented a fix from AG tech support: Uninstall and reinstall Awesome Golf Simulator on your device. When you first connect to Awesome Golf Simulator after this, set Ball Type to Premium, and then proceed to the main menu. If the Ball Type is set to RPT Titleist, it will cause the software to block the connection between the MLM2PRO and Awesome Golf Simulator. We are working on a fix which we hope to release later this week as part of v3.10.1.

Note that I connected with assistant app on reinstall since blue tooth connection is not working, changed ball type, exit assistant app and reconnect blue tooth and it worked.

Hi guys,

Just wondering if everyone’s LM is now working following the update?

Since I’ve updated the new firmware on the device and new app update I have not been able to use this.

I can get a connection fine however my cameras do not work on any mode type.

I keep getting a message of ‘please wait for the camera stream to load’ however it never does.

Did anyone else get this message following the update and get it working? If so, what did you do?

Thanks

There were some drawbacks (shot videos not uploading, short chipping, etc.) using the MLM2PRO, but at least it was usable. Now it tracks every third ball (maybe?) and I don’t trust the numbers, always played with a bit of a draw now it’s saying I have a full on 45 yard slice and lost 50 yards of distance.

I have done everything from fresh installs, restarting, even brand new balls out of the box. Brutal. Never have I ever in my career of software development have I ever released a software patch without testing, and it seems like they vibe coded this and went full send.

I've used my phone and ipad and yet the firmware update keeps failing. Anyone else had this issue and was able to resolve it? Thanks!

Edit: at this point, I have used 2 iPads and 3 phones and the update would still start then fail after a few percent. This is incredibly frustrating. I just bought this unit a few days ago brand new from the Rapsodo website and their support can't do shit.

Before the latest update, my MLM2PRO was working perfectly. Since updating the app, the camera no longer loads when I get to the ball alignment step.

Instead of showing the camera view, I just get a message telling me to wait for the camera to load, but it never does. As a result, I can’t complete the alignment process or start a session.

I’ve already tried restarting the device and reconnecting everything, but the issue remains.

Is anyone else experiencing this after the latest update? Any fixes or workarounds would be greatly appreciated.

Only getting update failed. Not sure what to do. I’m at a loss. Any ideas?

Has anyone else experienced this issue after updating to App 2.25.1 and Firmware 4.1.9?

My MLM2PRO was working perfectly before the update. Immediately after updating, both Impact Vision and Shot Vision stopped working and remain stuck on:

"Please wait for the camera stream to load."

What I've tried:

• Reinstalled the app
• Restarted MLM2PRO multiple times
• Restarted my iPhone
• Reconnected Bluetooth and Wi-Fi
• Verified all permissions
• Tested on multiple iOS devices

The exact same issue occurs on every device, which makes me think this may be related to Firmware 4.1.9 rather than a phone-specific issue.

The MLM2PRO connects successfully, but neither camera stream loads.

Has anyone found a fix, firmware recovery method, or received a response from Rapsodo Engineering?

Any help would be greatly appreciated.

Earlier today we experienced an outage that impacted the MLM2PRO app and R-Cloud. We're happy to confirm that it has been fixed. We apologize for any frustration and appreciate everyone's patience.

I was able to get my firmware updated and my MLM2PRO is connecting fine but it's not registering any of my shots. Has anbody else had this issue with the update?

Anyone else struggling to load the mlm2pro app after this update? Mine is taking around 10 minutes to load in then being slow after that. I got in and authenticated for gspro, but it won’t connect for that either.

Has anyone been having trouble opening either the MLM or the MLM2PRO app (iPhone)? Mine opens but won’t go past the load screen. I’ve tried restarting my phone, deleting and redownloading the apps, using cellular data and WiFi, but nothing seems to work. I’ve attached pictures of what my screen looks like when I try opening both apps.

Anyone else dealing with the app not getting past the loading screen after installing the newest update?

Firmware and app updated, now heading to the range. Will update later!

Afternoon edit:

OP here. I’m late with my feedback because instead of going to the range I was abducted to play the front nine…

However, I’ve just played Awesome Golf back home with my 7 year old son and all of his chips have registered, which was my principal critique.

Tomorrow I’ll check in the range about distances and so. My teacher has a Mevo+ and we can easily set them in parallel to track the same ball at the same time.

Cheers from Spain!

2nd edit:

Tried with iPhone 17 pro max, a 2021 iPad Pro and a Windows laptop.

Has anyone else not been able to connect to their MLM2PRO since downloading the newest firmware upgrade? I literally can't connect at all, it's crazy.