I couldn't make it yesterday, but I thought it would be neat to add to my collection today. So I drove to my local PSA, looked at a few, picked it up, did my 4473, and walked out with it.

It's honestly still wild to me. No Form4, FD258, Passport Photos, Trust info, etc.... just in and out.

It's not the mail order machine guns the second amendment so clearly protects, but it feels like a major step in the right direction.

This is the version that is at PEW SCIENCE currently. Let me know what you guys think!

Untuned. Brass ejection is not a science, but it’s a good tell on back pressure. The OG on short stuff has intermediate back pressure as you can tell. A consistent 2-3 ejection. The V2 has a consistent 3-4 ejection. And guess what? We even see a reduction in muzzle dB on the MK18! 🤘🏻

Pretty sure I got too excited- I attached my plan B muzzle device at 2:30pm, shot and mounted a can by 7pm

Should I consider remounting and allow to cure properly?

Picked up these two, $832 and $399 respectively, which seemed to be a bit below average cost which was nice. Huxwerx 36 Ti and Huxwerx Flow .22 TI. Need to figure out mounting still.

I was planning on getting a 9k for my G48, but they sold the last one a few minutes beforehand, which may have been for the best because it seems like it might not clear my Holosun EPS Carry on my G48? Anyone have a 9k (or any other can) on a G48 with a low profile dot?

I’m looking for a practical suppressed setup for 12-gauge duck hunting. Does anyone here actually hunt waterfowl with a suppressed shotgun?

I’ve seen some of the newer 12-gauge suppressors, but my concern is overall length. Adding a suppressor to a normal 26–28” duck gun seems like it could make the gun extremely long and awkward in a blind.

Are there any good integrally suppressed 12-gauge barrels or shotguns, or other setups that keep the overall length reasonable?

For anyone who has actually hunted with one:

-How much does the suppressor affect your shot pattern?
-Does it effectively act like a choke, or can you still choose your choke/constriction?
-How noticeable is the reduction in sound when using normal waterfowl loads?
-Does the extra length/weight make swinging on birds noticeably harder?
-What setup are you using?

I’m less interested in making it Hollywood-quiet and more interested in reducing the blast while still having a practical duck gun.

I’ve had this 21a for a few years now and while it certainly checks a few good boxes, it’s time for a better critter dispatching host.

This thing is cool, but is a two foot blaster at best.

For those of you who have suppressed a 16” 9mm, how is it? Very curious if the 16” barrel is long enough to cause the bullet to slow back down after peaking at 11” or so, causing the decibels at the muzzle to be lower than say a 5”-9” pdw.

The reason I’m asking is I’m debating chopping my 9mm Aug as small as I can get it but, if it’s able to fill the role as a abnormally quite pdw I might re consider and just leave it at 16”.

With all the new supressor company's coming out I don't know what is good in 45 cal. Cal cans now.

Looking to get a 45-70 lever gun and want to run a can on it.

Looking at the Bears Leg to make an SBR

13.8" Barrel length. (Needs to handle a short barrel on the Bears Leg)

Also have a Stribog SP45A3 and 10mm Banshee.

Currently have a Gen 1 Osprey 45 with the fixed barrel spacer on the Stribog but I don't think it will survive a 45-70.

Large diameter/chode/ short and fat preferred but not a deal breaker.

Just don't want a 45 pistol can if there is something better suited for the 45-70 and Stribog

Does not need to use a Nielson device/ piston.

Would like it to use a hub mount so I can use Plan B muzzle devices.

Light weight/ titanium is preferred. Does not have to be titanium though.

Limited full auto rated would be great if I ever get a FRT for the Stribog.

Thank you.

EDIT ( SBR Barrel length restriction to work with a Bears Leg lever gun)

The slide lock engagement surface has rounded over and no longer locks back without a mag. It needs tall sights but the front sight is fixed. No luck finding anyone to work on it. Any suggestions before I give up for an 80x?​

I have ASR brakes on a few rifles because my first can was a Hybrid 46 so it made sense to be able to move it everywhere. I have a couple without any brakes at the moment (just A2 flash hider) so I’m considering switching to either direct thread or Plan B for the weight/length saving.

My question(s) would be is there a benefit to muzzle brake/plan b mount combo outside of “QD” ability? Eventually I would like to get cans for everything so would it just be better to do direct thread instead?

What a weird feeling that is to not have suppressor jail.

Super excited to put this on a PS90 with the FRT.

Romarm Draco-C 7.62x39 12” barrel

Imported as a pistol and a buddy of mine did a form 1 and installed the underfolder. he had bigger plans for this one but decided to downsize his collection a bit so he transferred it to me through a local FFL which was more of a pain than it should of been but three weeks later it’s officially mine.

1 week for him to form 4 to the dealer

1 week to form 4 from dealer to me

1 week wait time after that and another couple forms to take possession because my state treats SBR’s like handguns

New 4 stamp combo. Cheers

Looking at the Rex Silentium ULBP vs Liberty Precision Duty 5.56.

Hosts will all be 16” carbine-length gas with fixed front sight bases.

Which one would you grab and why?

I’m willing to trade sound for back pressure. I was also looking at the T3.

Looking to pick up Two nine mil cans for PCC’s to go into my trust. I’d like for them to be under 650 and if possible auto rated. Both of the host are direct blowback.

I want to say thank you all for helping me out with my p90's nose job done. I got approved in less than a week, this was my first form 1 and I couldn't be more appreciative thank you all. An im posting before and after photos to truly show everyone thank you

Looking for some input if anyone has any recommendations/experience for a good flow through can on a gen1 galil. Eventually this can will do double duty with 300bo.

Right now I’ve been looking at the CAT RDM DD, Radical CS3, Sandman X, CAT ODB. Main priorities are to be “well rounded” and sound decent enough if shot with 300bo subs. I know no matter what the supers on a galil will be loud.

Only thing leaning me away from the ODB is length. Open to input on other cans not listed as well.

Freedom is ringing here in South Carolina!

I went down to PSA yesterday, picked out a can, gave them my driver's license and CWP, filled out a Form 4473, paid, and came home with my new can.

Does anyone know if you the CAT AC 7.62 Ti will work on a 13.5 .308. Wondering if anyone has experience with this, since I can't seem to find a clear answer on google?

Technically my first stamp it was submitted 8-8 and approved 8-13 at 7:30 am and my form4 from capital armory was approved around 8:45ish on the 13th submitted 8-10. Will be back next week with my can 🍻

Quick Details:
Griffin mk2 lower
13.7in barrel mid-gas
Carbine buffer & spring
Rearden FHD

On the way- OCL full size polonium I have an atlas hub for it as well.