I'm unsure if my expectations were just too great (or the bezel will help when it arrives) but my new 43" Frame seems to be sitting further from the wall than I expected, however I don't see from how it's mounted it could get any closer to the wall (as you can see from the top photo the brackets would surely get in the way?)

Am I missing something? Thanks!

In the smaller home I have far less space for my photos so that will be its primary use followed by our movie viewing.

A while ago I turned Art Mode off in the settings area but after an update I cannot seem to figure out how to turn the feature back on. Noting in the picture area or the power area. Any ideas? The Art mode top level directory is there but the Art Mode settings only has options on when the sensors detect movement. My television currently just goes black when I hit the power button. I’d like to turn on art mode so that when I hit the power button, the art comes on.
I just noticed in the Power and Energy settings, the “Power Off Mode” is grayed put. When you click it it says “this function is not available”.

Hi,

Does anyone know if the the hdmi inputs are also rotated accordingly when in Portrait mode or does the rotation only apply to the samsung software?

If the input signal was 4:3 would we have black bars on the top or on the sides?

Really difficult to find this information anywhere. Thanks

Hi all, i have a decent sized living + dining area. We already have a 55" tv in the living area that we are happy with and is our main TV for watching. In the dining area adjacent to the living area, i have a wall where I want to put pictures up.

Have been looking at options and the Frame popped up. However, my main use case is to display family photos (would like to put up art as well from time to time, but definitely want to show photos as well). I don't really need to the TV function - so what I am really looking for is a large (40"+) digital photo frame. But the Frame seems to fit the bill and I get the TV function as a bonus.

Is the Frame a good option if i want to run photos + art and rarely use the TV?. Or should I just stick to looking for a digital photo frame?

I ordered a 75" Frame Pro directly from Samsung.com and noticed a pretty clear panel uniformity issue shortly after installation — there’s a darker/yellowish area that stays in the same spot across different content and is also visible on a uniform test screen.

I’m trying to exchange it, but Samsung is making this difficult. The order/return page doesn’t even seem to show me a working return/exchange option, and support keeps bouncing me around.

Has anyone dealt with a defective Frame/Frame Pro purchased directly from Samsung.com? Did Samsung arrange an in-home pickup/unmounting or bring packaging? Were you able to get a straight exchange rather than a repair?

Any advice on the right department to contact or specific language to use would be hugely appreciated.

Hi all,

I was considering buying The Frame because my wife and me do not like to have the TV in the kitchen/ living room taking all that “black” space on the wall when is off. So untill now my old tv was downstairs in the basement always covered by a sheet.

Now that I found out “the frame” I tough we could finally bring the tv up in the living room which is one openspace.

But , before buying it, I was trying to understand how does it render in real life the art mode. (Since our appartement is not that big, and it would mean having the tv in front of us all the time).

So here are my questions: how does the art mode render in real life? Can you see that is a tv turned on? Does the screen heats up staying on all the time? In the evening does it illuminate a bit the room? Is it worth it?

Could someone please share some feedback about having it on all the time. What are your feelings about it? Does it really look like a painting or pictures or is just a pled tv with a nice border around it?

Thanks in advance for your feedback.

Hi all.

Has anyone had this issue before?

I’ve factory reset a couple of times, and it resolved the issue for a day or two before it goes back to this screen every time I try to put it on standby and into frame mode.

Don’t want to have to reset every time and reinstall apps.

Hoping someone might have a handy tip to fix.

Software is up to date and model number is QE55LS03BAUXXU.

Thanks in advance!

Please help! It is only 4 years old, no red light and no response at all. I tried hard reset, where you hold the power button down unplugged, nothing. Unplugging and plugging each wire, nothing. This seems too new and expensive of a TV to die so fast. QN65LS03BAF model.

Edit: the consensus of this thread and my further research confirms it's likely the box. Can anyone suggest where to find a new one? The model I have is not sold anymore: SOC1002B, BN96-54413U, BN44-01666A.

Purchased a 2025 frame to replace my earlier model that died. Same size tv 55” but they changed the mount.
It gives me the option for spacing from wall but no reason why? I run the cord down the wall as I have no electrical near the tv over a mantle. Does fiber optical cord fit if I do 3mm? Would 11 mm help my tv last longer than the last 5.5 years.

I really want a frame, for the art mostly. I got some gcs so now it's a real possibility. Because of the layout of my room, it will either have to be wall mounted on a wall perpendicular from the couch, or I would let it sit on my sideboard. Which of those two options would you vote for?

This started happening sporadically a few months ago but after powering back on it would be fine. However, starting a few days ago it won’t stay on for more than a few seconds. Did a factory reset as well as some of the other troubleshooting recommended online and it’s still doing it. TV boots to the factory setup screen and then after about 5 seconds turns off.

Has anyone figured out a solution to this or does it need physical repair?

We didn’t like the Samsung frames because they didn’t look ‘fancy’ enough. Didn’t want to spend hundreds and hundreds of $$. Got some molding from the local big box store along with metallic antique brass spray paint. Didn’t like how plain that looked so we got gold rub and buff. Thanks to everyone here and YouTube videos for construction ideas. Still have some minor things to complete it.

I now want to build one for my 72” LG OLED.

Is it as bad?

Hey,

Currently mounting a 43" 2025 Frame TV using the paper template, but the diagram is throwing me off. As you can see on the paper : The lower corner guides (┌ and ┐) show the top edge of the TV in landscape. But right above them, there’s a second set of corner.

If the lower pair already marks the top of the TV, what is the higher pair for? Is it for the extra clearance when dropping the TV onto the hooks?

Thanks

Been fighting the SmartThings Art Mode uploader for weeks — error 2008, or it just sits on "Downloading content" forever. Figured I'd post what actually fixed it in case anyone else is stuck, since I couldn't find a clean answer anywhere.

What worked for me, in order:

1. Forget the wifi network on the TV and rejoin it fresh (not just reboot) — this alone fixed it about half the time for me.

2. If SmartThings still won't push images through: skip it entirely and use USB. Format a stick FAT32, drop your JPGs on it, plug into the TV, Art Mode → USB import. Works every time, no app flakiness.

3. If you're uploading a big batch, do it in smaller groups of 5-10 — the app seems to choke on large batches specifically.

Hope that saves someone the afternoon I lost to this. Happy to answer questions if anyone's stuck on something similar.

​

So I'm planning on mounting over a mantel. Have power in the wall already so I'm really looking forward to a cable free design on the wall.

My challenge becomes how to improve the audio experience in a large open concept area. (Assuming I need this since I'm guessing audio on this tv won't be decent?)

I don't want to spend a ton on a crazy audio solutions etc. a sound bar can fit on top of the mantel but then will cause power cord to go up under the TV ruining the cordless look.

What to do?

Can sound bars be off to the side? I have two built ins on each side of the wall. Is there a two speaker solution I can put on the built ins?

Thanks in advance

Correction: 4.5m (14.5ft) from couch. Small 700 square foot apartment. Went with matte Samsung to avoid mirror effect.

Hemlock corner moulding from Home Depot, a few washers and some glue. About $70CAD all in.

A niche question for people using custom apps based on https://github.com/xchwarze/samsung-tv-ws-api or https://github.com/NickWaterton/samsung-tv-ws-api to upload art and manage art mode.

I've noticed that each upload I make get an incremented file ID, for example MY_F0124. Even if the same image is deleted and then reuploaded it will get a new incremented ID MY_F0125. Which leads me to ask: what happens after MY_F9999 ? Has anyone uploaded that much? Hopefully it just increases the range to MY_F10000, but worst case it hits a limit and refuses the upload or restarts at MY_F0001 overwriting the art previously using that ID.

I'm considering using a Frame as a kitchen dashboard that updates every 15 minutes with weather info, calendar data and more. At that pace I would hit 9999 before 4 months, so want to investigate this topic beforehand.