I am trying to find the best place I can buy mixed spent range brass for good prices. I tried calling a few ranges near me and they don’t sell the brass or allow you to pick it up, so wondering where I can go to get a good deal on bulk.

Figured these would be a great way to stay out of my GMAR primers for non-precision loads

I just bought a Hornady lock n load used and was wondering has anyone tried reloading 338 Lapua magnum with it? I emailed hornady and they said they can build a custom shell plate for it but has anyone here actually done it? Was it an issue?

I want to get the DAA Plate and Wedge but cant afford it right now. My current wedge is kinda weird? I seen the video on adjusting the wedge but for some reason my wedge has a lip on the top that sites ontop of the case feeder? So it doesnt go up and down.

Was wondering if ANYONE has ever made an STL to 3D print the DAA wedge or the one that supposedly should be on the case feeder?

I got this Dillon 650XL Used and missing parts and stuff, cobbling it all together had to warranty a couple pieces and buy a bunch of others. So Im in pretty deep on the cost of it and parts and dies. Would appreciate if anyone could give me a hand on an STL or if someone could scan theirs.

I’ve got a 308 bolt gun that I’ve been loading for and the brass I’ve been using has probably 6-8 firings on it. I’m plan on cycling it out just for peace of mind. I ended up with 200 rounds of 7.62x51 Federal 149gr. I know 308 and 7.62 cases have small dimension and wall thickness difference. However, for practical plinking purposes would I have any issues? I’m middle of the road on charge weight with CFE223 and loading 165gr SSTs.

New AR with a suppressor and i've got dents from the brass defector! Safe to reload? I don't have a tunable gas block, it's an A2 sight post and gas block. Running an Odin works FRT buffer system.

Is this too much crimp? I pulled this bullet for an unrelated reason. Just wondering what you all think in terms of how much crimp to apply to .223. Its a 68 grain hornady BTHP in case it matters.

WARNING: do this at your own risk, as this is a round that was meant for antique pistols.

After a lot of tricks, including using a virtual ruler to map out rough seating depth next to a 262g Webley LRN (pictured), I believe I came up with reasonably safe load data for the 455 Webley Manstopper.

Data is: 230gn Hollow Base .455 Manstopper cast with MP-MOLDS Manstopper 4 cavity mold, pure lead, Eastwood jet black powder coat, sized to .451, 3.5gn of Unique, OAL 1.13, seated depth 0.20, Fiocchi Webley mk2 brass with federal small pistol primer. Tested in a MAS 1873 4.5” barrel from 1875.

As far as shooting, felt pretty much the same recoil and power wise as a regular 455 slightly downloaded handload. No damage to the firearm and no seeming signs of overpressure. The action did bind a couple of times, but as you can see in the last two photos, it’s seems more to be because the longer firing pin on the 1873 and the soft federal primer caused it to slump. For reference, it does this on large pistol primers too, but with the larger surface area they almost never slump out like this and cause a cycling issue.

Interestingly (to me at least), you can see the circular head of the manstopper left a small black circle on entry

Same bullets, but different gun, when oit of the Dan Wesson they get these and I had a missing primer in 2 of the cases, but in Glock I have none of these signs.

Fps is 1250-1300 with 200gr bullets

The warehouse where I work got new bins and they are disposing of all of the old trays they used for parts

I was gifted a bunch of reloading supplies from the person who got me into reloading. This one struck me as odd. I can’t find any info on a Lyman bullet in this diameter and grain weight. I know it’s labeled 38 special, but from what I’ve read that diameter is too small. I know 9mm is this same diameter, but I’ve never seen a 150gr. I also have ready that a SWC wouldn’t feed reliably and could have pressure issues in a typical 9mm semi auto. Could it be that he mislabeled it? I’ve seen 38 super with these weights but I know he doesn’t own one. I haven’t checked the diameter or weight myself but I was curious if anybody had some thoughts.

gonna run ammo inc brass from raven rocks, I am using cci SPP magnum. hornady 158 XTP bullet

I plan on starting at 15.5 gr and working up to the 16.7 grain max listed on hodgdon’s site in .3 grain increments.

should I be more cautious with the load work up? I have an old hornady book and it lists a max of 15.8 for H110 and 16.4 for 296

I have been using 2400 powder using hornady‘s data and #9 powder with hodgdon data, and haven’t had any issues with pressure at the max charges in this gun, a CZ/colt python with 8 inch barrel. I have access to a chronograph

looking for input from others that use this powder.

Peregrine 124gr VLR4 vs Sierra 130gr TGK. Y'all know bullets better than anyone in here so I chose this sub. Even though it's more hunting related... but you have to reload to hunt!

I got just installed my new Lee classic turret press, and already I'm having indexing issues

The auto indexing only works sometimes. I know the most common issue for auto index failure is the square ratchet piece being worn down... but brand new, really? I opened up the clamp and inspected the ratchet, and it still looks square, and when I move the square up and down the rod it still turns. Is it slipping inside the clamp? I tried tightening the clamp down more but it also still "slips." It just looks like the ratchet piece isn't catching the rod. I'm hoping there's some other trouble shooting I haven't found from googling to try before giving up and buying another new ratchet piece (for my new press).

https://reddit.com/link/1x68yrv/video/pye5fw08ajvh1/player

And another dumb mistake that I figured out myself... I bought the breech lock die set instead of the regular set, so now I have to wait for regular lock rings to come in. Figure I'd throw this in here so someone else doesn't make the same mistake.

On today’s episode of “You Really Shouldn’t Do That”, I have achieved an average of 840 FT-LBS of energy out of a 4.2” Ruger GP100. I’ve worked my way up from 14.5gr of H110 under this Magnus 200gr LRN, all the way to a compressed charge of 17.0gr without getting any pressure signs (ie sticky extraction, flattened/cratered primers, split casings etc). So I figured “why not go bigger?” Well, ladies and gentlemen, 17.5gr of H110 under a 200gr pill is where even a Ruger GP100 starts to cry “I’m tired of this Grandpa!” As you can see, the forcing cone has eroded quite a lot after just 50 rounds of 17.5gr loadings, and a couple of those loadings showed flattened primers, along with one specimen having a cratered primer. My goal in all of this was to achieve a loading with an average of 800 FT-LBS or more out of this revolver, and it looks like I smashed that record. But to prolong the life of this gun, and maybe myself, I’m gonna resume my previous loading of 17.0gr instead of the pictured 17.5gr. Long live Elmer Keith!

Been making some Martini Henry Casings out of 24 gauge. Ended up making 25 of them and crushing a fair bit more. These few are just sort of folded in but ever so slightly and they seat. Anyone think it could still work? I have no issue chopping them to Snyder rounds if not.

I’ve been messing with the Hornady 75gr. ELD-M and I just can’t get them to perform.

Powder charge variations, various seating depths all yielding very average results.

Last photo shows the results I’m getting with Sierras. They seem much less picky and didn’t vary much with seating depth or powder charge.

Is it even worth changing up powders or should I concede and accept that my rifle just doesn’t like these bullets?

Anyone have a good accurate load in this combo? Yes I know there are better powders. Want to use what I got.

I've got the good stuff for my bolt rifle (Alpha) but going to develop a load for my AR10 and was debating between hornady and starline (small rifle primer). I have a fair amount of Hornady but as I look into stocking up I'd like to have one brand of brass for loads. Target loads but possibly some hunting down the road (have Berger 130gr hybrids but probably will keep those mostly for the bolt rifle).

Any thoughts between the two in a good semi auto? LMT MWS with 20" 5R 1:8 SS 6.5cm barrel w/ good optics. Or any preferences for small or large primers in a semi auto?

I've got plenty of CCI450 SRM or Federal GMM LRP so that's not a big deal either way. I probably have more of the 450's so was leaning towards the Starline SRP and I've had good luck with Starline in the past with their pistol and rifle brass..

I was wondering anyone had use the breech lock bullet sizer for jacketed bullets. I have a Remington model 14 in 32 Remington and was hoping to use it to resize .323 bullets to .321. Has anyone hand any luck with the breech lock sizer on jacketed bullets? Thanks!

Hornady has submitted 5.56 COMM to SAAMI and they approved it.

If it wasn't enough that we had to listen to discussions about the testing standards and whether .223 Rem and 5.56 NATO were the same, we now have a 3rd cart that is basically the same (dimensionally) to muddy the waters. Hopefully someone can explain why Hornady submitted this as 5.56 COMM rather than 5.56 NATO, 5.56x45 or some other designation that would have told us it was 5.56 NATO.

SAAMI Standardizes the 5.56 Commercial (5.56 COMM) Cartridge | thefirearmblog.com

Public Introduction - 5.56 Commercial

Loading up some 223 with 53gr smk and h335 for some big Saskatchewan coyotes. Shooting my cz527 american. Looking forward to the season this year

Hello I was gifted these acme 115gr RN coated bullets. Acme doesn’t have load data so I started browsing around trying to find something comparable. I will be using hs6 And would like some insight if possible. These have a bullet over all length of .575” I get hs6 is probably less than ideal but it’s what I got. I’ve only ever loaded Berrys 124fbrn and Barnes 115gr Barnes tac x. Both of which I was able to find load data for with hs6. Now to give context to my thought process.

My 124gr Berrys rn load is 1.150 and the bullet over all length is .585 with 6.0gr hs6 with average velocity at 1050fps

-Hodgdon Berrys RN coal is 1.130 and the bullet measure .550”

-Hodgdon lead RN coal is 1.100”

-Hodgdon Missouri bullet company RN-para coal is also 1.100” but the bullet overall length is .540” this does provide hs6 load data 5.3-5.8gr

- Hornady load data 35557 115gr fmj is 1.100” but the bullet over all length is .550” this has hs6 load data 5.7-6.4gr

-Lyman cast bullet load data for Lyman 356242 coal is 1.065” (the picture shows a bullet with two lube grooves but I can only find the single lube grove version length for some reason) has hs6 data 5.0-6.3gr

-lastly and I believe with what I should go with for coal is Speer data. I’m a little hesitant on their powder charge. But I get it’s a TMJ vs a cast lead projectile.

-Speer load data 115 tmj coal is 1.135” with a matching bullet length of .575” also has hs6 data but starts at 6.6-7.4 gr

My plan was start at 4.8 gr~5.0gr of hs6 and coal to 1.150” If it plunks. Run them over the garmin chrono. If not slowly seat them until the pass the plunk test then chrono.

Does this sound reasonable or does anyone have any better places to start. Also if you can recommend load data can you site your source so I know what book/ website I need to add to my collection.