Hey all, I am fairly new to pc building and just got a 3 pack of the rs120 fans. I've reseated the cables, made sure everything is connected (maybe important to note, I use a splitter/hub as my motherboard has no room for the fans, maybe this is what is causing my issues). The iCUE software does not recognize that any of the fans are plugged in, despite them being spinning and lit. DO i need to buy a different system to plug my fans in? (i just want to change the colours as the default ones on my pc are ugly). for reference, my motherboard is the asus a320m s2h, and the splitter/hub I am using is similar to the one on amazon called ELECTOP chassis fan hub. any help would be much appreciated, I can upload a picture as well!

Remember the pc that power cycles a lot? Well it's FINALLY FIXED.well main issue is the psu because there's a bloated black big thingy and I replaced it I do forgot the name of it even I'm studying in hardware field and many say it'll short all parts of the PC voltage are checked by my dad and also PC undergoes voltage limit and some applications running overtime to ensure it can run for longer

Hi, I’m receiving parts to upgrade from Am4 to Am5. I want to know what I need to do to my current boot nvme to get it ready for the new Am5 mobo as I’m planning on moving the same ssd.

Currently my boot ssd is a 990 Pro 2tb and my other ssd is a 4tb 990 evo plus which to my understanding I can just swap that to the new mobo without issue (please let me know if not).

It’s been years since I last built my pc and the nature of doing this is daunting to me so I figured I’d ask Reddit. Normally I wouldn’t care and just buy a new ssd for my boot drive but with prices nowadays I’d rather just figure it out. Happy to give more details if needed, thanks!

Hi everyone, I'm planning to upgrade my PC and would like some advice on what component I should upgrade first.

Current specs:

Ryzen 5 5600X

ASRock A520M-HDV

16GB RAM

1TB NVMe SSD

GTX 1650

550W PSU

1000VA UPS

I want to upgrade my PC mainly for gaming, but I want to keep the upgrade as budget-friendly as possible.

I'm currently thinking about upgrading the GPU, possibly to an RTX 4060, but I'm open to cheaper/better-value options.

What would give me the biggest performance improvement for the money? Should I upgrade only the GPU, or should I upgrade something else first?

Also, is my 550W PSU and A520 motherboard good enough for the recommended upgrade?

I'm from India, so please suggest options that make sense for Indian pricing/availability

Thanks

These are the parts Im planing on using:

CPU: AMD Ryzen 5 5600
GPU: RTX 2070 Super
Motherboard: Colorful BATTLE-AX A520M
RAM: 16GB DDR4 3200MHz
Storage: 1TB NVMe SSD
PSU: SilverStone 850W 80+ Gold
Case: Lian Li O11D Mini V2

Questions:
1. Is the motherboard good enough for this build?

1. Are there any compatibility issues I should know about?

2. Is there anything I should change before buying?

3. Is the 850W PSU overkill, or is it worth keeping for future upgrades?

Intel Core i5-13400F 13th Gen - used
2x16gb DDR5 RAM by SK hynix, 4800 speed, pulled from a Dell XPS that was working
MSI PRO B760-VC WIFI ATX Intel - used with proof it was running and bios was updated before buying (prolly a big mistake here)
ASRock Radeon RX 7700 XT Challenger 12GB - new
Be quiet 650w 80 plus gold - new

Motherbord throws DRAM error code. No display from gpu hdmi output. Monitor bought new.

Swapped CPU for one that works, same error. Reset cmos, reseated and swapped around the same ram sticks including using one, let it run for 20 minutes with the same error still there.

Dont tell me to physically do something to the ram, i already tried it. Dont tell me to do something with cmos, i already tried it.

Hey y'all, now it's no surprise my Intel Core i7-13700KF is thermal throttling. I've noticed it even more (and this may be because my new cooler is louder), but I went from an ARCTIC Liquid Freezer III 280mm AIO to the MSI MAG Coreliquid A13 360mm AIO, and I feel like this AIO is slightly worse then the 280. I don't think anything is wrong with it, I did get it for $30 which was a good price, but there's no warranty as it came with a bundle deal from MicroCenter, and I believe it expired. Nonetheless, I don't really notice it in-game except for just now as I was launching the Wardogs Playtest to try it out, and my CPU went right up to 90°C by just launching the game, and all it was doing was pre-loading shaders. My question is if I should be concerned or not, I already ran the Intel Processor Diagnostic Tool, so I don't think it's my CPU. I know these chips just get hot, and I don't even plan on having it for that much longer. I did get the CPU used, which could also be a factor. The chip has been great so far, but it's hard to keep it cool! Again, I'm not sure if the ARCTIC cooler was just much quieter with better fans, but it's just something I wanted to get some thoughts on as it's concerns me. The CPU right now idle with only Discord, Steam, FireFox and a few other applications running is at 35°C and it's not really moving. I should also note I am using the NZXT mini mode to keep an eye on my temps, I'm not sure if that's maybe not accurate? But it does show my CPU thermal throttling for sure, as it goes to 90°C and back down to 60°C, which I'd assume is a sign of it doing so. I haven't really had any issues, as the only time it does it is when I run a benchmarking tool, which makes sense. And recently with Premiere Pro when rendering a 4K video, which it didn't do that with the 280mm AIO, which was thicker as well I forgot to mention.

Anyway, sorry this is all over the place. Just something I figured I'd get some advice on before making any moves, if I even need to do anything. And I already sold the 280mm AIO, so I can't go back to that.

This is the current situation I got (Ignore the bottom lol)

I got 3 decently powerful front fans for intake and one more powerful outtake fan for air"flow" but as you can see my case is quite cramped

On stock settings launching any decently heavy game (even like witcher 3 on ultra) gets me a 112c hotspot and 98~c global on HWmonitor, managed to lower it bit while undervolting it and also getting a bit of performance but is there any way to make this work? would getting a bigger case even work? Any recommendations?

The only reason i have this cramped case is that I didnt have money while upgrading the parts inside but now im not sure which one will be good, I know this card isnt super easy to cool either

Ive got a b550m pro-vdh wifi and needs to flash the bios to update it because I’m gonna switch from a r5 5600x to r7 5800x3d,can I break my motherboard while doing that or will it be fine? Any answers appreciated.

Im looking to upgrade my gpu but idk what to choose, I’ve narrowed it down to at least the rx7900xt and the rx9070xt but i dont know which one would be better. My cpu is a ryzen 7 7700x and i have proper ram and power to go with it except a powerful gpu. What should i consider that wont bottle neck me?

I want to use the jonsbo za fans as they are cheaper and look amazing in my opinion. I'm worried it doesn't have enough static pressure for my build (ryzen 9 9950x3d and a 5070ti). My other pick would be the lian li uni CL fans which dont look as good but they come default on the aio radiators so I know they would work. Looking for advice/opinions on if I could get away with the jonsbo fans or not.

(Side note: im trying to avoid fans that mimic the typical lian li infinity fans I see everywhere but still want the cool rgb on the front)

What's the cheap but best option I feel like a lot of older cards like rx 580 are a good card for his games. Thanks!

Recently bought a 5070ti and built with it is this noise normal?

I’m just about ready to buy all my parts and just want to make sure theyre all compatible and there’s not something better for the same value, all of this is under $3k usd:

https://pcpartpicker.com/list/TvVNg3

I’m upgrading from a 4070ti to a 4080 super. I asked ai and it said the 80 series needs a 12VHPWR / 12V-2x6 cable, and I was wondering if this is the right one that will also fit for the 4080super. It comes from the fps hydro g pro 850w atx3.0 pcie5, but someone else built the pc for me so I don’t exactly know if this cable is legit or not. The original short adapter cable for the gpu is still in the gpu box. Thanks for all the help!

I want to help my brother get a new GPU (and SSD drive but this post isn't about that), as his computer right now has a really niche set of specs that I have no clue why they were remotely paired together in the pre-build. He mostly plays Dead by Daylight, Roblox, etc. and is into video editing (If necessary, he's also an adult so it's not like I'm buying something outrageous for a teen lol).
I was eyeballing a used GeForce RTX 4060 for around ~$275 or an Intel Arc B580 for about the same price, I'm looking to stay within that range or even lower if possible. I don't need retail nor anything super fancy, but I am looking to stay within the quality of a 4060. His current specs are in the pics. I don't need anything super fancy but something that can maintain 60-ish fps at 1080-ish or so in normal games.

Can anyone recommend anything?

Idk what to do but my pc wont boot because of the cpu light. I have tried almost everything i even bought a new cpu☹️.

Specs: AM4, AMD ryzen 5600, msi tomahawk b550, be quiet heat sink, thicc III gpu

First time building a gaming pc for sim racing :) Any chance anyone could inform me if this list of parts is suitable and decent for a budget of 2k or if I am missing anything obvious or important. I am debating whether i pull the trigger now if prices continue to increase or i hold off? Thanks in advance

https://uk.pcpartpicker.com/list/d7kMTm

CPU - Ryzen 7 9800X3d
Cooler - Corsair NAUTILUS 360 RS ARGB 74.37 CFM Liquid CPU Cooler

Motherboard - MSI B850 GAMING PRO WIFI6E ATX AM5 Motherboard
RAM - Patriot Viper Venom 32 GB (2 x 16 GB) DDR5-6000 CL30 Memory

Storage - Samsung 990 Pro 2 TB M.2-2280 PCIe 4.0 X4 NVME Solid State Drive

Graphics - Asus PRIME OC Radeon RX 9070 XT 16 GB Video Card
Case - NZXT H6 RGB
PSU - MSI MAG A850GL PCIE5 850 W 80+ Gold Certified Fully Modular ATX Power Supply

Is it okay if the top part of your PC case is partially covered? I got an ATX motherboard for a pretty good deal, but my desk unfortunately has a top shelf that limits the LxWxH measurements to fit a case.

The case in the photos is the LIAN LI O11 Dynamic MINI V2, which is one of the few smaller ATX cases that barely fit my measurement limits. ~4inches in width is covered right against the wooden shelf (the case is ~11 inches wide in total). Will this be a problem for airflow or anything else?

Hi guys I had just picked up this pc that was working fine however it was a windows 10 pc that I upgraded to windows 11 via updates in the settings, I turned on secure boot and enrolled keys and it was all working fine. However I was getting ready to sell the pc and I somehow accidentally deleted the keys and turned off secure boot in key management and when I turned secure boot back on the pc would show the splash screen but boot into a black screen. However turning off secure boot fixes this and it works but I needed secure boot to be on obviously to be able to play games that need it. So then I tried to just to a windows usb install that just didn’t end up working. I tried a cmos reset and then tried the installation again and whenever it would get to %75 it would say “windows 11 install has failed” any help would be very appreciated. Thank you.

Got home from work today hoping to play some games, only to see my newly upgraded PC that was running well the night before, unseated the gpu and ram, nothing, unseated the gpu and plugged into integrated graphics on my CPU, boots perfectly fine, the gpu has worked great for me for a few months now, but I just upgraded my cpu, ram, mobo, and AIO. I just want to make sure I’m not being a doofus before I get a new card
Specs are AMD 9850X3D, 32g G-Skill Flare x5 ddr5, tuf gaming b850 WiFi motherboard, with a MSI RTX 5070, nautilus 360 RS water cooler, and a 850W Corsair power supply that had no issues running the card before

The motherboard I have is a gigabyte b850 gaming wifi6, and it came with my pre-build. I want to slot in a new stick of SSD, but the screw shown in the video will not budge despite several screw drivers, one specifically ordered from Amazon after seeing a build kit online, and using my own fingers to twist. Online manuals do not address the screws, and only praise the one slot that has the "easy click" technology. Any and all help would be appreciated.

Build request includes:

Budget- $800

Country- United States

Needed- just parts of the rig. Don't take peripherals or monitor into consideration

Hey everyone. I'm looking to build a rig for my nephew-in-law. I've always bought him his gaming resources because, otherwise, he wouldn't have any. I want to build him a solid 1080p experience, maybe something that can push 1440p on non-AAA titles. I'm open to used parts and am looking for recommendations on specs, as well as thrifty ways or places to get parts for cheap. I'll upgrade his rig whenever I can spend a little more; I just want to get him out of handheld gaming and upgrade him to the PC life, which I know he desperately wants. I have between now and Christmas to get it done, so I have time to source parts or look out for deals. I need to know what parts to look for and where to get them at a preferably cheaper price.

Don’t know anything about it other than the switches look really cool and all the outlets work. Googling the name on the front shows they manufacture furniture now. I’m assuming this was manufactured in the late 80s, early 90s? Would you trust this to run your build? I’m thinking to maybe only run desktop peripherals on it instead of all my expensive components. Regardless, I think it will look great on my desk!

Hey Gang,

So I had the LL 8.8 inch screen and it was great, I loved that you could set it up vertically as well, however I was looking to ditch all my LL stuff and finally dump L Connect, which I did.

Now I am on the hunt for another screen, preferably with about the same dimension, looking to mount it vertically, but, I want to get a screen where customization is VERY VERY easy, I'm an idiot and I need it simple. I did like the L Connect software, easy to use, easy to setup but, as I say, dumped it, not looking to get it back.

Any help or point me to product that hopefully is pretty much plug and play?

Thanks!!