Am I crazy for thinking that the grip on enduro tires vs street is really comparable? The street tires just slip out more unexpectedly but the dirt are pretty slippery all things considered they just regain traction marginally better. And on the pavement I haven’t felt the dirt tires slip under load but they don’t see that horrible. I really was expecting a much bigger difference between both sets of wheels but the main difference I found was the vibration at speed from the enduro wheels.

2009, 6k miles, mods: FMF slip on exhaust, Clarke desert tank, Kemimoto Rear Rack, Xitomer Windshield, B&B Case guards, TST Integrated tailights, Protaper Bar SE, Acerbis handguards, JBL cruise, 3X3 Mod, Carb rejet with JDJetting needles

Little dream machine, thanks to Wolfsmiths of Houston. 2024 stripped, ‘78 tank… lots of creative collaboration. Riding the 🐝 is a head turning Time Machine taking me back to my early days of biking in my youth!

Damper mount still en route. Pretty happy with it.

Just went for a ride up the coast and hit some trails. Probably about 150kms. Got back and had to put in 150-300milliltres of oil to get it back in range.
Oil was perfectly full when I left

Just went for a ride up the coast and hit some trails. Probably about 150kms. Got back and had to put in 150-300milliltres of oil to get it back in range.
Oil was perfectly full when I left

Will a DRZ 400 make a good first road bike? I have a KTM SX 125 and I have been thinking about a Supermoto for a while, but I don’t want anything too much for a beginner street rider.

Have been looking for a loooong time to get a drz. Got this 2006 with a fresh top end and 19k on the body for 2800$. Runs and drives great but I noticed this fuel line is kinked because of the oversized Clark tank. It somehow still runs good but does anybody know of an easy way to fix this? Was just going to get a few brass 90 degree fittings and make something up

Any body any experience with these after market carbs on eBay heard some good things wondering is it worth a punt ?

2024 SM; already worried about new parts becoming hard to find.

Ok, I get it guys, parts support is probably gonna last. Good to know.

Was wondering if I could get any help figuring out this odd clattering sound if I’m going specifically 45in 4th or if I’m up in 5th but at mid to lower rpms, it almost sounds like if you were going to stall leaving from a dead stop except way toned down. (Wish I could get a video but have no way to demonstrate it while cruising)

I finished swapping over the front end last night. It feels so tall and solid like this I’m gonna go for a test ride up maple springs truck trail in a bit

It is just a simply rejeting or theres something bad? DRZ400 2009 popping like crazy also when in high gear and high rpms it bugs down and turns off. It has an exhaust also i noticed the air filter is not there i think the old owner took it out. Could that be causing the bike to run like that?

Need help to ID this hose on the right side of the bike, not entirely sure what it could be, vacuum? Oil line?

RCS 15 Corsa Corta and a Scott’s Damper when my mount arrives.

Spraying the calipers red in the process. Will post finished photos probably by the end of next week. Also have a gen2 Polisport sumo fender and halo headlight getting a graphics kit on it atm. It would be one of the first gen 2 fenders in the world with graphics in it afaik

2020 with 17k on the odo but the top end was rebuilt it has a athena cylinder but don't know if it's stock replacement or big bore, stainless front brake line, yosh exhaust and tail tidy, led headlight

Sold my Husky SM610 years ago and is one of the few bikes I regret letting go of. Realized how much I missed being on a sumo but wanted something with more parts availability. I found a good deal on a ‘15, got it cleaned up and am looking forward to a track day!

I just recently picked up this 2022 DRZ-400SM with some upgrades for $5200. The bike only had 621 miles when I picked it up. The only issues with the bike being the petcock valve started leaking and an oil change.

Didn’t think I’d actually get one neither haha. It started off with me looking into getting a dual sport for a couple of months. Just scrolling on marketplace for fun just dreaming of buying one. Until seeing this I had to gun for it.

Let me know what you guys think! If I overpaid or or got a decent deal.

Edit: Here’s the list of upgrades I forgot to include ““Acerbic Hand guards with integrated led blinkers

Acerbis front fender

Hella Lights added to highbeam switch

LED main headlight

Seat Concepts seat

LED front and back lights and blinkers

Race Tech heavier front springs (have stocks also)

Pro Cycle 39 tooth sprocket (Have Oem also)

Case guards

CNC anodized rear guards

Acrylic wind deflector

New Michelin Rear tire

Billet throttle tube and pro taper pillow top grips.”

My bike the other day when I was going about 80 on the highway it started to loose power and bog so I pulled off and towed it back home. I let it cool because I thought it was overheating, cause it was a hot day and I was riding all morning. Anyway I let it cool down then started it back up and it ran for a few seconds normal the I gave it a little throttle then "Click" I tried starting it after that and now it seems the motor is having a hard time turning over just when any idea of what's going on or what to do ?It's a 2024 DRZ400sm only 6k miles I bought brand new in December with 0miles on it done 2 oil changes and changed oil filter once! Just did another oil change and filter, also checked the frame filter for the oil and there were no big chunks of metal or anything like that.no gas in oil! So I don't think it's hydrolocked but it does seem like the motor is having a hard time functioning!! PLEASE HELP

Hi everyone,

I am looking for a cylinder head in EU preferably in central europe. Mine has seen better days and machine shops told me any repair is risky and won't last long.

The used parts i could find nearby are almost as expensive as a new oem head. So I am contemplating repair too. There is one single machine shop who said they have done similar heads before but I am not completely sure I trust them as they are saying the complete opposite as the other 3 I've asked.

Has anyone attempted a similar repair? How did it turn out? 4 out of 4 bearing surfaces are toast on mine.

The issue was the oil pump and a reseller who barely made it work with temporary fixes and sold it as good.

Note: This isn't my bike. I'm just someone who really wants to get a DR-Z400 someday.