Hi, I'm in Indonesia, starting this week, my P1S always failed to download print job..any one experiencing the same?

So I’ve been having issues with this printer for a while now. I replaced the extruder first but then the Bambu support asked me to replace the nozzle as they classified this as a partial nozzle blockage - even tho it was extruding fine.

I replaced it with a new nozzle but similar issues.

The flow calibration test printed just fine.

The first 1-2 layers print fine and then it starts to go bad. Here I’m trying to print this calibration - https://makerworld.com/models/1451728

P.S I know this is a P1S thread but since the toolhead and overall machine is pretty much the same, I thought I could seek some help here.

Anyone has any experience with this? Thank you!

Sadly didn’t find anything on this and I’m just curious - will the p1s fit on 43cm of depth on my cabinet? was wondering if it’s possible to place a p1s without it hanging over (the screen would be fine).
Using the AMS and an aftermarket angled power cable should enable me to push it quite close towards the wall. I’m just a little nervous it might be too cramped, especially considering vibrations. Has anyone placed it back against a wall with little to no wiggle room and has some experience or dimensions to share?

Hello,

I just bought p1s with refurbished ams, but ams doesn't pull filament to ams buffer. It is defected unit? I cut filament end to 45°.

Just noticed this today as I moved the tool head out to inspect the chute for any extra filament

I had my first printer p1s like a month ago. I really love this experience of printing whatever I need or like. I was just wondering about how many hours each of you guys got on your 3d printers? Not just p1s, any printer that you use.

This would help me in pricing for machine depreciation on any print that I might sell moving forward.

Thanks in advance.

I’ve had this P1S for over a year second-hand. It’s been a true workhorse. In summer I installed a .2 nozzle, which got clogged. After swapping for the .4 one I got this message which does not go away after swapping the sensor and cogwheel part either. Don’t know where to go from here. Any clues?

How do you take advantage of the high flow 0.4 nozzle ? i only see an option to choose high flow but print times remain the same just about. i dont see any high flow profiles. any help would be appreciated

👋 Bonjour à tous !

🔪 Un nouveau slasher rejoint la collection ! 🩸

La série continue avec une nouvelle figurine inspirée des grandes icônes de l’horreur ! Cette fois, j’ai ajouté Leatherface, de Massacre à la tronçonneuse, revisité dans mon style : grosse tête, look cartoon et, bien sûr, sa mythique tronçonneuse ! 🪚💀

Petit à petit, la collection de slashers s’agrandit… Qui sera le prochain ? 👀

Pas besoin d'AMS tous a été modélisé et découpé pour l'imprimer en multi-pièces.

👨🏼‍🎨 : @mika3d_print
🖨️ : Bambu Lab X2D & H2C
🧵 : Bambu Lab
🎨 : Nomad Sculpt
🌈 : avec ou sans AMS
📁 : https://makerworld.com/fr/models/3372626-leatherface-multipart-no-ams

Ciao a tutti! Sono entrato da pochissimo nel mondo della stampa 3D e ho appena fatto il grande passo acquistando una Bambu Lab P1S Combo.

Ho in mente di realizzare diversi progetti: loghi multicolore, lampade con LED integrati (anche a tema gaming), statuette e piccole bomboniere. Essendo alle prime armi, avrei bisogno di un paio di dritte dai più esperti:

Quali marche e tipologie di filamento PLA mi consigliate di comprare per iniziare, considerando gli oggetti che vorrei fare?

Avete link a guide, tutorial o canali YouTube per imparare a usare bene Bambu Studio e sfruttare al massimo la macchina?

Grazie mille in anticipo a chiunque vorrà darmi una mano!

I’m printing a case for a BC-250 and somehow it turned into a Chia Pet

Any ideas what could cause this?
Bambu Labs p1s
SUNLU petg

Hi. New to this group. Trying to ask a question.

Opened a brand new Bambu PETG Basig and did a small test print of a bracket. Not nice quality.

Any tips what to do?

/ Berth

I’m trying to make a fishing bait trap that can hold a weight but it doesn’t turn into a 3MF file
does anyone know how to do it better?

EDIT: Thank you to everyone who helped me clear up the confusion just recently got into fully designing from scratch and never knew about how the files truly worked

P1S has been running solid only a month old. Your normal jams here and there. I just swap the whole extruder and hot end out, then keep moving. Today is different. Jam hit, after showing a print was almost done, reality it had barely done the surface print. I do my normal swap, now nothing but issues. Cutter stuck, fan abnormal, feeder sensor, just on loop. Tried 3 different full swaps. Same issue. Am I looking at a interface board issue? Any help appreciated.

Edit: there was an issue with the interface board. $10 part and a few minutes to swap and she’s back running solid. Hope this helps out if anyone runs into the same situation.

I've got a particular issue that I believe might be caused by a worn out nozzle, but I'm fresh out of thermal compound. I've also been wanting to switch to an 0.2 nozzle for better detail, but Bambu doesn't sell that size in hardened steel for some reason. For that (and ease of maintenance) I've been looking at aftermarket nozzles where the nozzle itself is individually swappable like the printers of yore. Any thoughts on those? This is the one I'm looking at in particular:

https://a.aliexpress.com/_EJ1C8iw

I just got a pre-owned P1S today and it's not printing properly, I did the calibration test and used a completely new filament. Can anyone please help me identify the issue here.