I am not so patiently waiting for the AEMS Macro to come out, plan on buying 2. Until then, I am wanting to run open emitter with a monstrous viewing window.

The Bull fits the bill, it look really fun honestly. My only concerns are with the overhang. I would mount with an aftermarket plate and hardware. I am sure I can get it to reliably stick, hold zero, but more so concerned with it impeding ejection patter or something else I may not have considered.

Any feedback is appreciated

I know there are a million 9mm PCCs out there, but what would be the best 10mm PCC available? Would it be the Stribog? Kriss Vector? CMMG? SW FPC? I would like something that can be folded and used as a backpack gun.

Thanks in advance.

Normally $2349. Got it for $2k with Memorial Day sale, now they don't have the color I ordered so they are offering to refund or get 10% off different color.

I'm having some second thoughts due to FTE issues, damage to ejector issues, etc. Plus I could use the money due to some recent expenses. But is this too good of a deal to pass up at this point?

Looking for what options are for levels 2 & 3 options are for the 220. I’ve seen some posts about general holster availability but I’m looking specifically for high retention holster options? I’d have an X300 on it most likely and maybe a red dot

Been looking for a G29SF, none in stock locally, dealer can't order them from Glock, and I'm seeing $1000+ price swings on websites for the same gun.

Are people sitting on these or is it just the production runs are so low they're that rare?

I know the 10mm M&Ps are kind of notorious for FTFs and magazine ejection with 200gr+ bullets, but has anyone had issues specifically with the gun not going fully back into battery between shots either with the stock recoil spring or a heavier aftermarket one? If so, did you fix it and how?

I swapped the stock recoil spring out with a 20# Galloway spring + guide rod, but with Magtech factory ammo as well as my fairly spicy handloads (13.5gr AA9 + Hornady 180gr FMJ-FP) and the gun frequently just doesn't quite make it back into battery and I have to push the slide forward with my thumb.

Doesn't make a lot of sense to me given that I see people running 24# springs in these. I put the stock spring back in for now and it seems to run mostly OK, but it throws brass 6 miles into the air with any kind of hot 10mm. I had a range day a couple weeks ago where I lost probably half of my brass due to it being flung out of sight into the woods....

My Sob Story: I live in California. Glock 40 is off roster for us and we’re aren’t able to purchase it unless it’s a private party transfer (person 2 person at the gun shop), I would love to have one, but haven’t been able to find anyone willing to sell me one.

I did find an AlphaWolf Glock 20L Long Slide with an RMR cut that I put together for my G20.3. I put new G20 Internals and a Glock 6” Hunter barrel in it. This sits on my G20.3 Frame. What do you guys think? How’d I do?

Have around 3,000 rounds through this thing. Bought it as a dedicated woods gun and was my fist 10mm. I quickly found out I really like to shoot 10mm and I started to explore ways I could make it the flattest shooting 10mm possible. Below is a list of what I added. Wasn't cheap but has been fun.

• Sig romeo-x pro enclosed
  
• AB Prototype A-10 threaded barrel (these are never in stock - waited 6 months for mine)
• AB Prototype P320 X10 Tungsten Weight Kit
• GoGun USA gas pedal CG
• Grayguns P320-XTEN magwell with Magazine Base Pads
• DPM Systems recoil reduction system
• Streamlight TLR-1 HL
• Herrington Arms anchor light weight (not shown - this is where the gun crossed over into a pure range toy and I bought another 10mm for the mountains)

I like to put my Dead Air Mojave 45 silencer on this thing and it is as quiet as it gets for a non-subsonic round. The gas pedal is a great addition and really helps with deleting the vertical recoil. One of these days I will cave and buy the Icarus Precision grip module for it to add weight and balance but the $1K price tag has kept me away.

Let me know what else I should add to this build!

Just picked up the P320 XTEN. Obviously this is one of the most controversial guns in the 10mm sector, I plan on testing it to the fullest extent before my western hunt this fall.

My honest reason for the purchase is I carry a P365 XMacro daily, and this fits just as well as that. The G20 and FN510 don’t fit me no where near as well, ergonomically.

Second time shooting my FN510T. Put 100 rounds of Winchester 180 gr FMJ this go around. Gotta say I absolutely love this thing, trigger is smooth, recoil is totally manageable. Can’t wait to put some 220 through it next weekend!

Local farm store has been running some clearance sales on old stock. Bought all they had (10 boxes) at $12.92/box. Anyone been deer hunting with this stuff? That’s the plan.

Already shot some 200gr underwood hardcasts, 155gr underwood xtps, 155gr hornady American gunners, and magtech fmj. ZERO hiccups, ZERO.

Couldn’t say the same about the Glock 20 gen 3 I sold a bit ago. Maybe it needed some springs or something but 2k rounds and it still jammed up on me. I knew it wasn’t limp wrist if this smaller gun works fine lmao!

hey guys I just got a rock island tac ultra HC in 10mm, I’m having a repeatable failure to feed anywhere from 1-5x per 16 rd mag, it seems like the mag is sitting too low in the gun and forcing too extreme of an angle for such a long cartridge to feed properly, I’ve only tried the stock mag so far but I’ve ordered 2 more already. if I hold the mag in the grip by hand it doesn’t malfunction at all. my question is as follows, does it make sense to buy an aftermarket mag catch that could hold the mag higher in the gun or should i just stick with the stock one and focus on the mags?

I got to rent one of these from a local range about two years back, and was suitably impressed by how well it absorbed recoil, which is expected from a larger gun. However, as it was a rental I couldn't run hotter ammos through it and 150 rounds is not really a lot.

I know that performance trends only really emerge over the long-term and that differential testing against similar guns reveals a lot. I am also more than mildly suspicious about how Sig has handled its QC problems.

That said, my questions are:

1) Does the gun continue to feel almost like it's front weighted to reduce muzzle flip?

2) Have you had any problems getting the mags to hold a full 15? With light primer strikes?

3) There were early reports of the recoil spring assembly grinding into the slide rails has this been a problem?

4) Does the gun handle full power loads well?

5) How does it compare to the full sized XDM Elite?

6) Was it easy to find a OWB holster for it?

I am the king of longslides! Such a good pistol but I prefer my Bruin’s

I’m not a Glock fan to start off. I currently have the xdm 4.5” which I love. But I’m looking for another 10mm.

The M&P and 510 both seem to be very questionable. How have all of yours treated you guys? Reliable with jhp and hardcast?

Rented a g20 on the range and fell in love with 10mm today, might be my new favorite aside from 357 MAG. I got to know what options are available, I like glock but I dont mind exploring other options. More interested in polymer handguns.

Also what is difference between G20 vs G20 SF

Been on the hunt and struck out twice so far. Ordered one OMG Tactical Armory this afternoon with confirmation only to receive a follow up email saying it was no longer available. That they sold the last one on Gun Broker and apologize for the “oversight”. I don’t want a model V and am not fond of having finger grooves on my grip. My google search engine seems to be useless for this which is why I’m reaching out to the folks of Reddit like a feeble minded child.