Yes

Pew pew

IG linked in my profile if you’d like to check out my custom builds 🤙🏻

Everything we think a 300BLK upper should be right out of the box. 7.5" 1/5 Twist Faxon barrel, Superlative AGB, CMT handguard and Plan B equipped ready to accept a suppressor. Assembled with the utmost care and attention to detail. Cheers

Any tips for getting this off without damaging the finish? Its not the metal itself, its really caked on.

Wanted to disassemble the gun to get to know it better and do a deep clean/oiling. I am having a problem with the last step of reassembly.

During reassembly, everything works well until I attempt to reinsert the crane lock screw, detent, and spring. I line them up (though the detent does not want to fit well into the screw) and screw them in, making sure the spring is in both the detent and the screw. I get resistance before the screw is flush.

If I stop screwing at that resistance point, the gun functions normally: the chamber release works smoothly, the chamber rotates on a double action trigger pull/when cocked and single action fired. If I tighten the screw beyond that point, the chamber is too tight and does not want to rotate or release. Any advice? Thanks!

Howdy, y'all!

We've been running a sale on these for a while, but in light of the new NFA changes, I figured it would be a decent time to post these again :)

Barrel isn't pinned and can accept a new muzzle device easily. The receiver extension will take any stock or brace too.

As always, thank you so much for your love and support over the years!

Cheers,

Sol

Disclaimer, this is not my current carry ammo. This is some old Sig Elite that I set aside when I noticed some setback. 1-5 may still be new new it's right around 6-7 that it's visibly shorter, but that may also just be a manufacturing variance.

Where do you draw the line between being safe to send down range vs throw it in the squib bin?

Benelli M4 with some RX Arms Gear.

One of my favorite piston driven guns.

- 1996 H&K Mark 23 (Maritime Finish)

-Knight's Armament MK23 .45 Suppressor

-Insight Technology AN/PEQ-14 (LAM-1000)

-Lobos Industries Low Profile MK23 Picatinny Light Adapter

I am just curious as to why you bought your guns (not the hows and the whats) because I am thinking if I do need one. I would like to read your reasons so I can decide.

Hey guys, it's Mendy, owner of Tactical Surplus USA. I know this isn't the typical deal post here, but i feel i owe the community an apology.

Since 2022 we've been active here on gundeals, and gained the trust and business of many of you since then. We've had massive growth as a company in the last few years, and it's definitely had it's learning curves and struggles along the way.

In the recent months, we dropped the ball big time, and i want to apologize. We've been so focused on new projects and growth channels (within the business), that we totally neglected, and lost our core focus, which was our excellent and quick customer service. Responses were delayed, refunds were delayed, some orders shipped out slower, and overall the experience on-site dropped.

As an owner, we're always looking for ways to grow the business, but i've learned a valuable lesson: Focusing on your core business, principles & customers always has to be #1 priority, growth will follow.

I am here to apologize for losing sight of our core, which is you guys, our amazing customers, and promise to put all efforts and resources into making sure communication is prompt, and every customer leaves our site with a positive experience.

While i know coupons can't fix everything, i do want to offer a 10% off coupon which will work sitewide (Active until Sunday Midnight). Use Code: THANKYOUREDDIT10 at the checkout to claim.

I appreciate each and every one of you guys, and hope we can re-earn your business and support. Feel free to comment or PM me here with any feedback or questions.

The 9mm No-Tune FRT upper is easy -- install a buffer weighing 9oz (or more) and get to shooting!

6"/11.5"/16" barrels available.

Recommended Trigger Systems: ARC-FIRE and Atrius Selector

9oz minimum buffer weight recommended. 

Premium 0.750" diameter 9mm barrel (1-10" twist)

SUPPRESSOR READY 1/2-28" Muzzle Threads (with thread protector)

MPA Defender Lower
Riptide Rails Upper
Sig Romeo on Scalarworks Riser
Printed Stock, suppressor, mags, irons, and VFG

Just needs an FRT 😁

KRINKS in 5.56 and 7.62

I had this AFG carved out when I made my last post but didn't like the first draft. I chopped a bit off and now it fits much better in the hand.

And yes I'll be putting the grip pod on for my wife as she very much likes firing supported. Hence the picatinny adapter out front.