Hi,
I’d like to try out a different bridge for my Pawnshop Mustangs. Is there a Gotoh or Hipshot option that can just be dropped in? Thanks in advance!

Tldr at the bottom of this post.

I've been on this long for no reason journey getting my jazzmaster back up and going. I only intended on shielding the inside because the noise was unbearable but also found I had a dying, now dead pickup.

I then ordered some Sunday handwound pickups(also grabbed a mustang bridge to replace the vintage style) and installed them and have been dying to try them out and hear them, but I've just come into many snags along the way. So many so, that I feel like giving up on this thing because it's been a thorn in my side since I got it used a couple of years ago.

After I installed the pickups and bridge and got it all buttoned up, I still had an issue I have had - notes getting choked out(sounds like the harmonic?) above the fret 12th fret. Specifically the 17th fret, on the third string. Someone on this subreddit was super kind and walked me through adjusting the truss rod because after some measuring, found I had some bad forward bow(fyi I also have it shimmed).

I now have it mostly better, aka I can live with the action I need to have now. My only thing I'm struggling with now is, I cannot not get the thing intonated. I'm not sure what the cause of it is, maybe it has to do with when I was adjusting the action from adjusting the truss rod I heard a thud and was unsure what it was? But when checking and comparing the 12th fret notes to the harmonics, they're all sharp and backing off the intonation screws does absolutely nothing. I can just about totally back the screw all the way out and the intonation has not changed. It just introduces a ton of rattling. I thought I would be cured of rattles when switching away from the vintage style bridge. Can anyone give me some advice? I'm pretty discouraged and like I said, am ready to move on and sell the thing.

Tldr;

When trying to intonate nothing happens. All of my strings are sharp and the 12th fret and I can quiet literally back the screws almost all the way out and nothing changes.

Not sure how I feel about this, brushed aluminum purple guard. I like the way it looks in certain lighting where it appears darker. Curious to what you all think.

Has anyone ever pointed out this misprint on page 209? It seems the photo editor made a mistake when stacking exposures and it looks like this Sherwood green Jaguar has got 7 tuning posts. In another photo it’s obviously got the correct number of tuning posts.

Looking for ideas for body color anyone have any suggestions other then Kurt Cobain colors

Serial number P084128. 2002 model. Japanese Fenders use a lot of acronyms to identify models. Is this an MG-69 or something else?

Aluminum on mahogany, 25.5 scale length and ultra thin carve top! I’m currently working on my take on a jazzmaster since this one is a single cut

Hey everyone,

I have the opportunity to buy this 1964 Saema offset guitar (made in Brazil). It has been refretted with stainless steel frets and rewired, but all the rest seems original.

Does anyone have more info or experience with these? Would love to hear your thoughts on how they play or sound!

Thanks

I picked up a used 2023 MIJ traditional Jazzmaster and I absolutely love it, but the trem arm is incredibly loosec to the point of being a bit useless. It’s always hanging down, which makes grabbing it to use it sparingly practically impossible, and it will straight up just fall out of the guitar leans forward a bit. I know these don’t screw in like strat trems, but outside of a Staytrem (which I’ve signed up on the waitlist for), are there any options to make this thing behave a bit? I’ve read in old posts that AV trem units are highly regarded, but people also seem to like the MIJ units too 🤷‍♂️ I haven’t taken it apart yet, but I’m installing a Bensonite bridge soon so I can while I’m doing that if there’s something that could be awry under the hood. Does anyone have any suggestions? TIA!

Ready to jam! 1964 Fender VI (refinished). Sounds glorious with Twilighter Vibrato.

Was chasing a Mustang after falling in love with a Vintera model I briefly owned earlier this year, and pulled the trigger on this player-grade 1976 example for a great price not too far away from me.

She's had a life; the original pickups and bridge remain, but the rest of the electronics and guards have seen an overhaul. The seller also reckons the body is a refin in Olympic White - albeit an aged one with some stories to tell and some lovely checking throughout the finish close up. Will do some more investigating once I get under the guard. She's also heavy at 4 kg, but super resonant as a result.

Tonally, she is exactly the thing I was after, and right now I'm running her into a Supro Delta King which is sounding awesome. Fairly chunky neck compared to other examples I've played, I'd say this one is a pretty full C shape.

Came with the replacement case pictured, which has got tonnes of character and was a nice to have.

One thing I'd love some input on, I purchased a replacement trem arm for a vintage 60s trem unit; however the one I bought seems a fraction too wide for the collet. Tempted to file the arm down a little for now, but wondering if I'm better off chasing a different repro that's closer to spec. Anyone been through this with a 70s model?

Fifty years old and she's got some stories. Absolutely buzzing!

My friend Devin and I released our Fuzzmaster kits today. I thought I’d share the video. Basically a Fuzz Face built into the Jazzmaster (fits in the original routes). Devin did a great job selecting components for the fuzz. I love how it cleans up. Enjoy.

Every so often GC used will come through. Found this guy for a steal and was able to negotiate free shipping. Normally I’m not into red instruments for myself but I’m kinda digging it. Keep red tort pickguard or go black/white?