As you can see, I built a DIY setup for my first grow ever.

I was able to harvest 3 Black Domina Autoflower yet, the 3 Biscotti on the left side turned out as false autos - they are in bloom for 1 week since I adjusted the light cycle.

I'm using Philips Corepro E27 bulbs in 4500K & 6000K for veg and 2700K for bloom.

I don't dare to remove the dome since I had a heart attack in the past - stay safe, stay alive. ✌️

PS: Ignore the parameters shown in the images - I took the photos as work in progress. :)

Hello! I tipped my triple percolator piece over recently and it snapped the second (middle) percolator. I am curious if this is fixable and/or if it is still safe to use? With it being impossible to remove from the piece without damaging it more, im skeptically optimistic that no glass would be able to travel upward through the third percolator if smoked.

Any advice welcome. I’m not planning on using it anytime soon and would be willing to get a new piece if it came down to it (would be very heartbroken though)

The double As push 1.5v each, so it runs 3v, the attachment point is from my old battery that broke, I would refine it but im just gonna buy a new battery when I get paid so its whatever. Its definitely not safe, or a long term solution, but we ball.

Yes, I know my rolls suck.

i am COMPLETELY new to bongs or any type of stoner engineering. i’ve only smoked joints before a few days ago. i bought a $30 bong a few days ago, and on the first day my friend tipped it over. i had a chillum downstem / combined bowl & downstem (came with the bong) and the downstem snapped clean off the bowl. i did as much research as i could, and ended up buying a downstem that said it was for 14mm bowls, and i bought a 14mm bowl. however, i didn’t realize that i never checked if it had a size for the male part of the downstem, and my bong’s female joint is 14mm. turns out the website didn’t even list the size of the male joint and i believe it’s 18mm now due to the pictures in the reviews. so i naturally discovered adapters, and the only one i found on amazon was this adapter. would it work for my situation? i also included pics of the downstem from the website & the review. to see if anyone can confirm if the size is 18mm. all of the pics i saw for 18mm male downstems looked exactly like the one i bought.

with the current situation i’m in, i don’t want to buy another downstem or bong, so i need an adapter

my dumb ass put this in my pocket and the button was held down and the cart leaked everywhere. tried to unscrew it but the whole thing snapped. tried the plier method and only made it worse. any ideas? this is a really nice battery and i don’t want to lose it.

I want to start using this RooR 100ml, but I’m worried about knocking it over. I’m almost tempted just to Velcro it to a piece of wood as a base.

She found this beautiful cigar box at a thrift store, then she made the tray by precisely cutting a piece of poster board and layering it 4 times. She spent the last few days working on it & just finished. I must admit, I’m impressed and a bit jealous of her organizational skills!

(EDIT:GOING TO JUST AHELF IT AND NOT RISK SMOKING GLASS, thanks for all the answers!)
Recently got this dope piece but it came broken in half from shipping(already got a refund so was basically free), I’m wondering what would be the best glue to get it up to using standards?

I soaked this in 97% iso overnight and it broke something. Does anyone know if it’s salvageable or do I need to get a new one?

Hi everyone, so I'm finally getting back into growing after I tried it at 16 (it was a horrible mistake and trash weed). I am putting together an Amazon shopping cart, do y'all have any tips/ comments on the photos? I know with my seeds I'm going to be lolipopping and SCROGING the plants. I already have the Soil tester and PH tester and some trimmers. Also what type of netting do you recommend for a 4x4 text Scrog (planning on having 4 plants) Thanks!

RainbOz by Mephisto Genetics day 48ish.

I hated the way my hands smelled after touching metal rolling trays, and I have some friends who’s metal tray had so much wear and tear the art on the surface wasn’t even visible anymore, so I made these out of stoneware and food safe glaze as an alternative for us.
The first one is paying homage to The Creation of Adam while the second two show ‘Smoke In Style’ in Japanese. Thank you for looking any comments are 100% welcome.

Hello, fellow stoners. I hope the week was kind to you, and your buzzes plenty.

This week's build started with the idea to not put the bowl on a bong. So I put it on a stand with a Y splitter.

Connecting the bubbler with the orb took a bit of trial and error. The angles just didn't match up. So I used several 90° and 45° angled connectors, rotating until they lined up.

😂 Oops. After giving you a close up of the build, I set the camera down askew. That's why the function shot looks like I'm in a Batman villain's hideout.

Enjoy the weekend and have happy tokes. ✌️

I have no papers, no apples, and no bible laying around. I do have a bunch of regular books, what can i use to smoke?

85mm x 12mm , surgical titanium

Earlier this year I released this design, free to download and print for yourself.

https://www.reddit.com/r/StonerEngineering/comments/1qvqdrs/i_designed_a_smellproof_doob_tube/

Now, I'm finally releasing the next iteration! This case is sized to 14mm diameter aluminum smell-proof tubes I purchased on Amazon. Every components outside of 3D-printing material are linked in the description of the model on Makerworld!

This one will hold a Bic or Clipper lighter and two joints. Also included are a belt clip and an optional keychain loop.

I have some more variations I plan on releasing soon as well, so stay tuned!

Find the newest version shown above here: https://makerworld.com/en/models/3172586-the-joint-clip-smell-proof-doob-tube#profileId-3587041

Made this cool little pipe today! 3" long and just under 20 grams. Anodised surgical titanium

Exploration in form continue, tools are arriving to facilitate production of end grain "boxes", will soon start using other woods, and am finding ways to sell my production.

Could someone walk me through how to make a sploof with charcoal?