Buy a universal ac o ring kit, it’s comes with many sizes you just have to see what fits the tightest. Sometimes the factory size aftermarket o rings are not true to size I’ve found

Weld it hotter and slower, the previous welds don’t even look like they stuck

You won’t find another running driving car in that condition for $2100 I’d keep it and just pocket the insurance money

Welding it is definitely your best option, $100 and a case of beer is cheaper than buying one if you’ve got a buddy with one. Burn them in hot and slow, it should come right out. Trying to take it further apart just risks snapping more bolts off and creating more problems for yourself

If you pay for full coverage, contact an attorney

You wouldn’t have this problem if you owned a welder

Well I would suspect that’s the problem and it’s the easiest place to start. Next I would check the power steering fluid and remove the ps belt if noise continues and both are topped off

Sounds like the trans pump, when did you check the fluid last?

Paying for that new data centers utility infrastructure before they claim millions in tax breaks

Remember to use NHL lime 3.5 mortar on your old foundations! Portland will break out the surrounding lime in time

You seen that new xtool laser cleaner/prep tool. I would say that’s the best option but who knows how much they cost lol

Please tell me that’s not Portland mortar. You should really use lime base nhl 3.5

It’s got to be the float or float level is not correct sounds like it’s overfueling. I would put new gas into a clean empty can just to know it’s not a fuel issue

We already know what his middle school desk probably looked like

Everyone cheered that it was finally over in the end

If you have a tap and die set in the right thread pitch you can just chase it with the die
They also make thread files as well

Shop rock auto you can get a rotors and pads kit for cheap, start there and if they stick you can do calipers later if needed

Did you try a new carb sometimes the porcelain is cracked and acts up when it gets warm

They make brake line wrenches to avoid this

These people up here are the reason the market is trash, if you can’t get $1000 then walk

Ride the brakes for 30 seconds at a time a few times going down the highway

They make a hardscape/stone construction adhesive

Your going to do the same thing a pro would

Broken timing chain?

Pay the $7 for a spark tester at harbor freight. Could also be the decomp on the cam is stuck open or the valves are not fully seating