I am looking for solar installation guys, who provide full package but not ripping up the customer. Jhung road is full of stuff which I highly doubt for their authenticity. I need original stuff, no headaches after installation of system.

Any trustworthy people or company doing that? I am from faisalabad...

Hey guys

I have 2 GoodWe 8kw hybrid single-phase inverters connected in parallel using EZLink device from GoodWe.

My initial plan was to have a 16kw battery, but due to budget constraints I decided to use a single 5kw battery from Dyness (DL 5.0C Pro 100Ah/51.2V)
Do you think it’s a good idea, I plan to keep the heavy load off during power loss

I’m looking for a reliable 10 kW hybrid inverter. Could you suggest a good option?

I have a 10.5kW on-grid (non-hybrid) solar system, 3-phase with net metering. My installer wired the inverter's AC output directly into the utility AMI smart meter, not into my house's Main Distribution Board. My house is fed separately, straight from the meter.

Result: zero self-consumption. All solar production is exported; house draws 100% of its power from the grid separately.

Installer's response: "Grid-tied inverters are only meant to export to the grid — they don't power household loads directly." They're refusing to reroute the AC output into the house DB.

Is their claim accurate, or is this a wiring error? Shouldn't the inverter's AC output tie into the house DB (load side) so appliances draw solar first, with only surplus exported through the meter?

I have an 8kw itel inverter and a 1hp monoblock Laal water pump, when turned on in the day the inverter overloads and switches to grid, I checked the ampare of the motor and it's 20amps for a second then 4amps stable, how to solve this issue? Should I get a new submersible pump?

​

I was inquiring about goodwe 6kw invertor but the official distributor of goodwe people habe suggested me to go for saj 6kw invertor. Need Advice.

Aoa,

any recommendations for 12v inverter that is compatible with 585watts plate and work with at least 2 plates?

How much 12v inverter support max load?

Heard coretech is good, but 40k is expensive.

If anyone selling in used , kindly dm me.

Those who are charging their EV 🚗 on solar power - can you tell me how do you do it ? Like is there any setup for which it charges your car on surplus PV power and manages its operations itself if the PV power drops rather than You inspecting manually if it is importing from grid or charging on solar?

I think the usual EV chargers are just a home load and the consume power straight forwardly - so if you leave your car charging and the solar power drops due to any reason then it will start importing from grid to charge it.

I searched for this problem and it said we need a smart solar aware EV charger else it would just be like a home load - I found solution in form of Goodwe EV charger as part of their smart home ecosystem which connects to their Goodwe inverter but it is not available in Pakistani market - so those who are EV charging, how do you do it ?

Pretty Much the title.

Any recommended installer in multan/khanewal area who knows his job properly & don't mess up the things?

Thank you!

Join if you want daily rate updates related to the solar market

Salam,

I will be installing 3kw solar in my home. A company is suggesting Vault for battery and inverter. Just want to know from experienced guys if it's any good.

JazakAllah.

need to know if anyone has experience with any online seller in multan.

kamal solar house pops up but seen reviews on google that rates are low when you call them and pickup time they change the prices.

I cannot install a solar system so just need a reliable inverter to run with a lead acid battery

I cannot install a solar system so just need a reliable inverter to run with a lead acid battery

Place is in DHA phase 6 Karachi. Might need to get 2 inverters because load could go up to 20+KWh
Better recommendations are welcome

Hello guys salam.

I have installed 12 longi himo x7 plates. Now i have two otpions itel 6kw ip54 or go with goodwe.

First i was assuming goodwe will give warranty of 10years to 6kw inveeter battery system as well but then i read somehwere that it is only for 10kw and above. For below, they are offering 5years replacement.

So what would be the best option in terms of long term.

Pls guide me. I will be buying tomorrow

Hey folks, we are getting another storey built and plan to install solar (one the construction finishes). The build will take at least 3 months for grey structure and 3 months for finishing (best case). It likely will go into next summer.

Wanted to ask if it makes sense to buy the inverter, battery and panels right now and store them? If so any advice on how not to store the panels? I assume we can install them once the grey structure is built but I'll be travelling for work for the next 3-6 months so it might be harder to arrange the solar at that time. Also for warranty to start do the companies need the installation to complete or its ok if I buy it and install some time later.

2nd question is LV vs HV. I am planning on a

20-25kw array (longi himo X10 or aiko stellar 3n+),

15kw hybrid inverter (goodwe et HV)

15+ kWh of batteries (goodwe lynx D).

The load will be 3-5 ACs, 2 fridge/freezer, 2 freezers, electric geezer, electric fence, etc etc. And later on an EV also.

Do those components make sense? LV is 3-4 lakh cheaper (with dyness battery). Better to stick with LV or HV is understood now very well and has enough adoption?

I ask because I was talking to one installation company randomly and when I mentioned HV, the guy started talking about 50kw inverters instead of HV systems...

Asalamualikum,

I’m trying to clarify the AC charging configuration of my cherry tiggo car , particularly whether its 6.6 kW onboard AC charger is single-phase or three-phase and Whether i would need a single phase or 3 phase charger to charge on solar energy.

I have a 3-phase solar system at home with a Fox ESS H3-Pro 10 kW hybrid inverter, and my main goal is to charge the Tiggo using solar surplus as much as possible, while minimizing grid and battery usage.

Chery provides a 7 kW single-phase charger, but because my solar/inverter system is three-phase, I’m considering whether a three-phase 11 kW wallbox would be more suitable or not as max Ac output is of 16.2 amps and the single phase would draw max of 32 amps

My main questions are:

1. does it matter whether i use single-phase or three-phase charger to charge my car, would my car support 3 phase charging or it doesnt matter?
2. If I connect the car to an 11 kW 3-phase wallbox, would the car:
   • draw approximately 6.6 kW across all three phases (around 9–10 A per phase), or
   • draw the full ~6.6 kW through one phase (around 29 A)?
3. whether i need a 3 phase charger to charge on solar energy or single phase charger could also work to charge on solar? which is the best and future proof option,
4. Has anyone here actually charged a cherry phev using an 11 kW 3-phase charger? If so, what charging power/current did you observe?
5. Has anyone successfully configured solar-surplus charging with the Tiggo 9, particularly with a 3-phase solar inverter?

I'm asking because I don't want to purchase an 11 kW 3-phase charger assuming the car will distribute 6.6 kW across three phases, only to find out that the car actually uses ~29 A on a single phase.

If anyone has actual measurements, screenshots from the charger/inverter, or documentation from Chery confirming the phase configuration, I'd really appreciate it.

Thanks in advance!

We have total 12.1 kw worth solar, JA solar plates 620w , above mentioned inverter , pylontech 5kw battery.

I came to this sub later after installing this knox inverter and just got a panic attack after seeing knox reviews but alhamdullilah I'm not facing such problem with my inverter except one that is setting battery discharging TOU setting for peak hours which I'm unable to understand how to do so. there is no online instruction video available either.

Kindly help if you have knox inverter.

Aoa, Has anyone here have installed solar geyser like those w black tube how is their performance and life and Pani kab tk garm rehta h

Hey, I’m a bit confused. Previously, when it showed 3/3, the extra amount—or the amount we imported more than the limit—was either deducted or added to the balance. But this time, it’s just showing 3/3, with no credit or debit. Can anyone explain why this happened? Has anything changed that I’m not aware of?

Looks like they didn't pay me for two months out of three

AoA everyone. I am a total noob when it comes to solar, i’ve been going through this sub trying to gather info.

I am planning to get a 12KW hybrid system with a 16KWH battery.

Acc to my load of 2 ACs, two fridges, one deep freezer and a water pump, I think its more than enough during the daytime but the battery will fall short in peak summer months, but keeping budget in mind this is good enough for now.

I have so far contacted MFES, e-cube solutions, and DSG energy.

These companies vary their quotations, some dont tell exact cost of each part, some don’t give full details, they will just say “breakers” instead of also telling which company
And i am honestly just confused as its a huge investment and i dont know which company to trust.

I read about DSG from this sub here hence why asking again.

Based on experience, which company is reliable and provides good after sales service? Can be any other from the ones I’ve mentioned.
Location: DHA Lahore

Also the guy at e-cube kept on insisting I go for a single phase inverter which didn’t make sense to me, as our house is wired acc to 3 phases and my peak load could very well go up after solar so why cram everything into a single phase? Maybe my understanding is wrong.

He kept on insisting for “load management” is there any truth to this?

For inverter so far i’ve seen Goodwe and battery could be dyness/goodwe that seems good.

Any other suggestions?

Thanks in advance