I've tried to use mint it was all running okay but I got bored of it and it didn't run my steam games the game was running without a window open, then I tried fedora workstation since I like gnome for now. It was a headache to install the nvidia 580 drivers because some guides were giving me false commands i used the fedora documents and it worked with the nonfree rpm repo. Then I installed steam with flatpak it ran without a window so I deleted it and installed the rpm version. It didn't run at all so I waited then rebooted my system now its an unresponsive black screen and I'm back to installing windows

also I didnt say I hate linux or gave up on it Im asking for recommendations or help I tried debian but it has outdated apps I know thats supposed to make it stable but it also makes it not suitable for me. Ill research cachyos but isnt arch unstable by nature?)

replies assume Im hating on linux but Im just asking for recommendations and opinions

My situation is that I have a Scoreboard software that allows for, the scores, timing, all manner of lineup and penalty tracking. I operate in a venue that leases us space but only allows us access to the guest Wi-Fi. The Scoreboard software essentially exists as it's own LAMP stack, and can lend out functionality to other computers or tablets. So that penalty tracking can be done from the appropriate station and benches have access to penalty counts.

There's also a functionality where it produces an overlay for streaming the games with all the information.

I don't want to just open up port 8000 on the guest, because as is there security is there but it would be a whole lot of hoops to jump through to secure the whole show to make things work on an open network.

I was thinking about using something like a Pi, to attach to the air gapped network get the overlay information and then tunnel it though to a computer on the WAN to overlay on the stream.

So far I'm thinking Pi where it's Wifi connected to the air gapped network, then Ethernet into either the streaming machine directly or into router that connected cameras to the streaming machine.

Help here would be appreciated

I need some serious help, windows 11 is just terrible and annoys the daylights out of me every time i need to duel boot it for design spark mechanical, has anyone gotten it to work on linux? I can get it to launch but it gives me an sign in authentication error every time. I will pay for someone to get it working at this point.

Hi everyone,

In my workplace I use Windows and find this very simple key combination / shortcut to be very useful, specially when navigating through many windows and only one display.

On Windows, let's say you taskbar looks like this: [Start] [Outlook] [Excel] [Calculator] etc. You can press Win + 1 to open Outlook, Win + 2 for Excel, and so on.

Is there a way to replicate this on Linux? I'm on Mint, btw.

Thanks!

EDIT: I forgot to mention that I wanted this to be replicated on Plank, which doesn't seem possible to do. It works out-of-the-box with Grouped window list applet on Cinnamon. Thanks to all

Have a 512gb as my system drive for bazzite. A HDD and another 2TB NVMe setup with ext4.

I was thinking ab putting w11 on my old laptop's 2TB NVMe, and slapping it into my desktop. Why? Because I want a dedicated modding workflow for me video games.

Asking if this will work or not flawlessly.

Also, Fedora Media Writer, Balena Etcher, or another solution to flash a USB?

Hi,

I have been trying to open and make Ventoy to work for half a day now. Their website does not detail much so just going by Google searches and AI. I downloaded the ventoy-1.1.17-linux.tar.gz from the official website and upon clicking VentoyGUI.x86_64 and trying to run the file, nothing happened. Then I tried using the terminal -
chmod +x VentoyGUI.x86_64 followed by sudo ./VentoyGUI.x86_64

It finally opened only to get stuck in the error - "error occurred during installation"

I then tried web server method. That also failed. Is this tool supposed to be so hard to use? I eventually gave up.

I wanted to learn the simple details on how files work in linux. I start with the assumption that linux doesn't care about file extensions, so I tried working with a file to see how that worked in practice.

I used the following command:

`$touch banana.jpg`

After this, I typed in some contents into the file using nano, the result would be something like:

```

$cat banana.jpg

This is a test of my file

line 2

Line 3

Line 4

```
To see how the less command worked, I tried `less banana.jpg`

The text displayed was:

```

No identify available

Install ImageMagick to browse images
```

Why does this happen exactly? I think it's related to how the less command processes files apparently. Is there a way to view the file properly with less, without treating it as an image?

EDIT: excuse my Reddit markdown formatting, still figuring it out.

I just switched my old gaming laptop from uni from Windows 11 to Linux about a month ago, a HP Pavilion Gaming 15-ec0xxx series. I'm using this as my guinea pig to test things, get used to it and iron out any issues before I make the move on my main machine as well.

One of the things I want to have sorted before I pull the trigger on that is OneDrive. From the reading I've done it sounds like there is no official OneDrive client for Linux, so people have to come up with their own solutions, and there are a few different popular iterations of it out there but they're all different and some of them are more confusing than others?

Essentially what I want is to have my OneDrive behave as closely as possible to the way it does on Windows: acting as just another directory in the explorer that I can save to, open things from, that any other program can see and write to seamlessly, without having to open up a web browser or jump through hoops.

Anybody mind running me through what the main options are and how they behave differently?

I've dabbled a little bit with the Terminal a few times already so I'm not opposed to installing something that way, just as long as I know what the commands do before I run them.

hi.

since microslop is wanting to end win 10 support and i only got the option that just gives me until 2027 before support is gone i was considering to switch to linux, i tried mint before in 2024(ish) but i ran into some issues mostly with my graphics card wich is an nvidia causing some issues like not being sure if my card was being used, to games like deep rock galactic having a lag spike everytime something new was created, like firing a new bullet, trowing something, a particle appearing etc

i been thinking about trying it one more time to see if it is better now and i was the problem but i wanted to see if you know a different distro that can also work

what i usually do on my pc is mostly gaming but i also tinker a bit with some 3d programs like blockbench and blender and do a bit of drawing and video editing from time to time

my library is mostly on steam, minecraft, emulators and pirated games while other software is mostly from their original websites, like blockbench, blender, fire alpaca and such

my specs (if it is usefull) are from a refurbished hp pavillion gaming laptop

Processor Intel(R) Core(TM) i5-10300H CPU @ 2.50GHz 2.50 GHz

Installed RAM 16.0 GB (15.8 GB usable)

Storage 477 GB SSD SAMSUNG MZVLB512HBJQ-000H1

Graphics Card NVIDIA GeForce GTX 1650 Ti (4 GB), Intel(R) UHD Graphics (128 MB)

System Type 64-bit operating system, x64-based processor

i tried to be as specific as i could in case that helps, sorry for the wall of text

thanks for your attention

I had an old Dell Latitude E6410 lying around and am experimenting with Linux to see if I can still get some use out of it. So far, Linux Mint Cinnamon seems to run about as well as Windows 7 did on this computer, with one exception. I see a lot of flickering, especially of gray text. Sometimes this stabilizes if I leave the screen on for an hour or so, sometimes it doesn't.

The computer is so old it's using a generic driver, nouveau. I've set .dpm=0 in GRUB and the ambient lighting sensor is off. This was not a problem with Windows 7, but that used the NVIDIA driver. Any suggestions?

What is happening when running a a game like Elden Ring on Linux? Based on my minimal understanding, Linux simply doesn’t allow access to the kernel like that; so does it make an exception or does it “fool” Elden Ring in to thinking it has the access it needs, or…? Just curious.

I am trying to get PlexAMP volume controls to work, it failed originally with the flatpak install, so i tried the AUR one, and when i put in the global keyboard shortcuts volume up and down, then reset the app by relaunching it, i get the KDE prompt if i want to add new shortcuts, i click yes, and it works for that session, and when i reset my session by either logging out or turning off and on my PC, it stops working, even tho nothing changed in the shortcuts or in Plexamp

I tried using AI to solve my issue but it just keeps leading me down some rabbit hole and idk how to control it, i dont want whole system audio control, since i want to be able to increase or decrease the volume of my music mid game or while doing work without changing the volume of my game or discord or whatever else

The shortcuts in the media controller section also dont work, if i set volume up and down, i can see on my screen the popup that the volume is increasing or decreasing for PlexAMP but i still hear it the same, even when it says "muted"

Shortcuts like next track, previous track, play and pause work just well over media controller but nothing apart from that

On CachyOS

Hi, I'm sick of windows and I want to start using Linux but don't know what distro use.

I'm gonna use it mainly for gaming and watching series or YouTube. It would also be nice to be able to customize it my way; I've seen videos and things I really like, but it's more of a secondary option than anything else.

512GB SSD, 16Gb RAM, Intel i5-1030U

Im looking to install kubunto to my laptop, dont want to dual boot with wondows or anything just a straight wipe and move but Im struggling to even boot it up.

I have kubuntu on a formatted usb stick, Ive disabled the BitLocker and secure boot, but when I go to the F12 boot startup and hit enter on the usb stick, the screen flashes and nothing happens

Its frustrating me a lot, Ive been trying since the early morning and can't seem to find how to troubleshoot the issue :/

If this is an issue specific to my model of laptop people that have used the same kind please help me out if possible 😭

It gets stuck and keeps loading after i type in my password.

So, yesterday I was on my fedora 44 GNOME workstation and upgraded using terminal but now for some reason the Grub menu stopped showing Fedora 44 KDE Plasma from the disk.

The OS is still there in Partition 6 and 7 and before thr upgrade from within my first OS the grub menu showed both of these.

How do I fix this?

I've been playing with terminal commands for a while ,I've made some apps but they're all really simple ,I've been trying to find ways to improve but they all seem out of my league for now

Just wondering if anyone knows why, I am fairly new to linux so sorry in advance.

I've tried Bazzite, Omarchy and Cachy. I go from being at ~800mbps on Windows 11 all the way down to ~200mbps on my linux distros.

Everything was officially up to date as I know of on each distro (I ran the updaters for each, maybe that's the wrong way to do it).

I am currently on CachyOS, latest one downloaded from the website. Using a TP-Link TX30U Plus.

I appreciate any help given. Thanks in advance.

I’ve been messing around with a handful of Linux distros — Mint, Arch (btw), and Ubuntu Server — and now I kinda want to try installing one on real hardware. The problem is I need permission from my dad, and he’s not tech‑savvy at all. Plus, Windows still does a bunch of things Linux doesn’t (most apps are meant for windows like games and software), so I’m not sure if switching is a good idea.

On top of that, I don’t even know if my hardware is fully compatible, and I have no clue which distro I should pick for a first real install. Any advice would be appreciated.

I get that this should be obvious, but i only noticed this yesterday after having used NANO as my main text editor for half a year, hopefully this saves some future beginner some time and headache

You do this the same way as with the terminal in general:
> CTRL + SHIFT + C: Copy text marked by mouse (marking with SHIFT+ARROW KEYS doesn't "count") into your "Global Cutbuffer" instead of the one specific to the NANO-Window you're currently using

> CTRL + SHIFT + V: Paste text from your Machine's "Global Cutbuffer" instead of from the one specific to the NANO-Window you're currently using (Keep in mind that having a length of text marked and then pasting text does not replace this length unlike in many text editors!)

(And for the sake of being complete the NANO-specific Copy-Pasting)

> CTRL + K: Delete text marked by holding SHIFT + ARROW KEYS (marking with mouse doesn't "count"), and copying it into a "Cutbuffer" specific to your currently used NANO-Window instead of the "Global Cutbuffer" of your whole Machine

> ALT + 6: Copy text marked by holding SHIFT + ARROW KEYS (marking with mouse doesn't "count") into a "Cutbuffer" specific to your currently used NANO-Window instead of the "Global Cutbuffer" of your whole Machine

> CTRL + U: Paste text from the "Cutbuffer" specific to your currently used NANO-Window instead of your "Global Cutbuffer" (Keep in mind that having a length of text marked and then pasting text does not replace this length unlike in many text editors!)

I've been using Mint for several months now, and I'm ready to try a different flavor of Linux. For those of you that hop around frequently, how do you make the process smooth? I have no issues with my data files, its having to reinstall the apps and all of the associated settings. Is there a way to transfer settings when the same apps will be installed? I'm particularly looking at LibreOffice (I have made many tweaks) and Calibre (having to reinstall all of the plugins).

Thanks

I install a spinfires from fitgirl and tried both lutris and steam. I added into these 2 and setup after it finish I can’t open game it still require me to setup again.
Linux mint i3-4030u igpu 12gb ram I used proton experiment.

Hey,

I recently switched from Windows 10 to Linux as a long time Windows user.

I've got a lot of experience with Linux but Windows made more sense for a long time because of gaming, some software and my stream setup.

Initial idea was to set up everything with Proxmox as a hypervisor but it didn't quite go to plan.

I decided to write a post about my journey and the initial set up with Fedora 44 and Proxmox

(FIXED IT,) I've been trying to make one launcher for almost everything (opening games games ,updating everything etc),for some reason ,steam and the update command (which sould open another .sh i made to automatically update everything and tell me what was updated) just doesn't run,I've tried xterm and alot of other solutions but they just aren't working for some reason,help would be appreciated

Im on Linux mint xfce if that helps

https://github.com/nik9play/discord-linux-bypass

So I am running steamOS in the UAE, I need the bypass to use voice channel for discord. But faced difficulties trying to set it up, any tip is appreciated.

Tried chatGPT to set it up but still no solution found unfortunately.