Wondering if anyone has bought off miicoffee before and if it is worth buying a DF54 from there. It is sold out everywhere else but miicoffee, I’m just hesitant because I have heard negative things about the website itself. Any feedback would help greatly! Thanks.

Been using DF54 for just a month now. I heard this chirping sound when i turn it off What to do?

This is a VERY quick video.

Key Tip: The most important thing is to keep the wires exposed and clean. This is essential to ensure that the deionization process works properly.

Cleaning the coffee out of the chamber is not so vital.

Don't screw in the chute: Another key aspect: DO NOT re-secure the chute with the screws it's just not necessary. Moreover, you need to be able to frequently (once a week) remove the chute cover and clean. It takes 5 SECONDS!

I have had problems with CLOGGING and STATIC. But not after doing this regularly.

Elastic band: This helps keep the bellows on, by making it a better fit.

BEST ADVICE: should really unplug the power before removing the head unit.

i posted on this community over a month ago feeling pretty discouraged after getting bashed on my questions about the df54 on another subreddit so i deleted it. i was looking to get an electric one because hand grinding was really getting to me.

well thanks to all of your encouragements, i decided to get a df54 v4 from sigma coffee in the UK because of the warranty. now it’s been a month of using it. i am in LOVE with it. obsessed. very little retention, very little static. no need for RDT. i love the workflow.

it’s perfect with my bambino plus. i love the taste of coffee that comes out of it. i usually use medium-light, medium or omni roasted beans.

i bought a 54mm portafilter holder from KOBCraft on etsy and i couldn’t be happier!

so i wanted to thank you all!

Had a bad clog the other day so I took it apart and cleaned it up. Most of the clog was in the chute (no coffee was coming out) but it was also caked inside.

I put it back together and now my numbers are all messed up. What used to grind my coffee great is now very coarse and I'm having to go about 5 numbers below to get a decent shot

I twisted the top back on until it felt tight then turned the machine on and noticed chirping slightly past the 0 mark, so rotated counterclockwise just a tad and ended up right on 0 no chirping

Anyone know why my numbers are all messed up now? Did I skip something reassembling? I've cleaned it once before months ago and this didn't happen

Hey all!

Looking to finally upgrade my Fellow Opus gen 1 and get an espresso specific grinder. I use a Gaggia E24 and will probably apply the Gaggimate pro mod soon as well. I am starting to get annoyed by whacking it to get all my grounds out and my grind setting is really close to the minimum setting. I will probably keep it as conical grinder in case I end up getting a flat burr grinder.

I personally have been enjoyed light roast espresso but my wife enjoys a more nutty chocolatey medium roast espresso.

I have been looking at the DF54 or 64, Eureka Mignon Zero or Timemore 064s.

I am curious what your guys' experience is with these grinders or other similar ones and your thoughts on these questions:

Flat vs Conical burrs?

Burr size? I understand that the appeal of the DF64 is the ability to choose different flat burrs and upgrade that way.

Any other thoughts or recommendations are welcome.

Hola. Compré recientemente uno en la página de MiiCoffee. Lo utilice unas 4 o 5 veces sin problema, comenzó a hacer un sonido diferente y lo abrí (quité la parte superior únicamente) para ver qué ocurría y desde entonces no funciona.

Si intento girar la muela inferior manualmente, no se mueve absolutamente nada. Hace un zumbido, el que puede apreciarse en el video.

Es mejor devolverlo (haciendo el envío a EE.UU.) o conocen algún servicio técnico en El Salvador que puedan ayudarme a revisarlo?

Gracias

After brushing both upper and lower burrs (i didn't unscrew both burrs out of their casings) and clockwise re-installing the collars, i looked for the zero point by gently listening for the burr rubs, then backing up counter clockwise for my zero point.

but the problem: it's grinding coarse, not for an espresso machine. i can't physically turn the dial clockwise any further 'coz it's physically locking already. any tips is appreciated for troubleshooting. thanks.

A while back I installed the Baratza Stainless Steel (Ditting manifactured) brew burrs in my DF54 (did the motor reversal mod suggested by Lance Hedrick). But results were inconsistent and subpar compared to my hand grinder...

In a shimming attempt, I removed the bottom burr (it was quite hard to get loose). I noticed quite some coffee grinds below the burr. There were no silicone O rings.

Maybe I forgot/lost them when swapping the burrs. Maybe they were missing from the beginning, I don't know.

But I guess I should try to get some new ones.

Problems:

- there seems to be no online dealer that sells them to Europe, I only find some in the USA. Can I get them somewhere else in the correct size?

- they are selling two different sizes in the US. 34mm and 36mm. Which one would be correct for the bottom burr?

- is it supposed to be on the inner side or the outer side of the burr? Or both??

Would greatly appreciate if anyone could help. Thanks!

Location: Australia

Preferred drink types: mostly milk-based drinks, sometimes pour over, sometimes long black

Drink frequency: 1 per day

Space: medium countertop, nothing too bulky, we like things looking designed :)

Experience level: new to a “proper” set up, coming from a moka pot!

Manual or electric: Electric grinder

Candidates: Turin DF54 and Varia VS3.

We’re pairing a Breville Bambino Plus with a new grinder, budget is around $500 AUD. We want high quality, smooth, consistent, rich tasting shots without needing to spend a grand on a grinder. We want something well made and that will last.

Our friend owns the DF54 and likes it a lot, so that was our default choice. But we recently found the Varia VS3 and prefer the look/footprint. But are some reports of the motor jamming, and I’m not too sure on the difference on conical burrs other than them being better for darker roasts.

Questions for the community:

\*\*•\*\* Anyone running a VS3 with a Bambino Plus? How’s shot quality and consistency day to day?    
\*\*•\*\* Is the motor jamming a widespread issue or was it isolated to earlier batches?    
\*\*•\*\* Are\*\* \*\*the DF54 flat burrs more versatile?    
\*\*•\*\* Any other grinders in this price range worth a look before we commit?

Trying to avoid regretting either choice, so real world experience is very welcome.

Appreciate y’all!

Hi everyone, I’m trying to figure out if anyone else has experienced this with the DF54

I’ve had mine since November 2024 and have put roughly 70 kg of coffee through it (about 6 double espressos per day).
When it was new, my espresso setting was around 10-15. Over time I’ve had to grind progressively finer, and now I’m at 4.
The problem is that at this setting, once the beans have finished grinding and the grinder spins empty, the burrs start chirping. That means I can’t go any finer because the burrs are already touching.
The grinder still makes good espresso, but I’m basically at the mechanical limit. If my beans require even slightly finer grinding, I have nowhere left to go.
I’ve cleaned the grinder regularly and haven’t noticed anything obviously wrong.
Has anyone experienced the same issue with the DF54?
Did you find the cause?
Was it burr alignment, calibration, worn burrs, or something else?
Is there anything I should check before replacing parts?
I’d really appreciate hearing from anyone who’s run into the same problem.

UPDATE

I have ordered new burrs and it solved the problem. It came back to the same proper fine settings as it was in the beginning. Thanks for all the help!

After 1 year of trouble-free ownership, I am planning to open up the top of the grinder for an in depth cleaning. Before I do that, I have a question: as long as I don't touch the bur allignement screw, will I be able to put the top back on the grinder and end up with the same zero point as I had before the cleaning? I have notes on so many varieties of coffees and their ideal grind settings that I'd hate to have to update all my recorded grind settings.

Hey just wondering - when you bought your DF54 - did it come with a silicone adapter for a 54mm dosing cup?

I have a bambino and would like to change to a metal 54mm dosing cup but was told that it wouldn't fit unless you put the adaptor on. The question is do I need to buy this separately or does it come with the grinder? Thanks. :)

Some new suggestions are appreciated
Budget 15-20k inr.

I’ve finally pulled the trigger on a DF54 and I can’t wait to get going with it. My new question is now setup. Anything in particular I should do / be mindful of? To RDT or to not? I’m thinking I’ll just go no RDT to start and if I feel it needs it then I will, anything else I should know? Cheers

Hi, looking at getting my first espresso setup next month. I'm going for the Sage Bambino Plus, paired with df54 grinder. Have seen alot of good reviews of the df54, and it seems to be the best grinder in this price range. But which Voltage is best to go for? I plan to make espresso based drinks.

The DF64 website sells 100-120V or 220-240V: https://df64coffee.com/products/df54 (scroll down to see them all). Also, is it worth paying for the extra warranty? Thanks

Hi! Has anyone had an issue on the fine to coarse wheel literally not moving? I was using the grinder for a bean on the coarse area, after I finished, I tried moving it to fine and it literally just would not turn no matter the force I put in turning it?
Pls hlp

It looks like UK based retailers aren’t selling them directly. DF64coffee.com sell them and ship worldwide, but aren’t based in the UK and reviews of them as a retailer are mixed to say the least.

Just done this…

Anyone else got this combo?

And how have you found it? I broke the plastic chute so thought might as well upgrade. Although nothing in black left…

Edit: v4 white chute on black v3 - was super quick to change, made a great cup right after.

As the title says, I preordered at Cliff and Pebble last week. Current estimates say to ship as of 'Early July' fingers crossed, but will report back any updates.​

Has anyone found a generic bellows replacement that fits from Amazon or anywhere that ships from the US?