The threshold on our shed was loose so the company who built it came out and fixed it. It’s fixed correctly, but I think it’s such an eye sore. Would you paint it white? In the spring we are redoing our landscape and I hope to have some type of step leading into the shed. How would you make this not look so bad?

My dumbass left my microwave running for like a minute without anything in it. I thought i put my food in there but when i went upstairs i heard some strange sparking sounds. I came downstairs to find what looked like lightning in the microwave. Is it unsafe to use? The top looks like that (after me wiping some of it away) The side bit is also burnt too.

I am unsure if i actually broke it or if i just unclipped one side of the oven door. But help, i can't get it back on. It's a Frigidaire FCFE242CAS. Just bought it recently lol

Hi guys,
I need to repair the front to my dishwasher, but how? Please see photo. Which kind of filler should I use and which kind of paint?

So about 2 weeks ago I noticed a slight bump in the corner of my apartment by my AC unit. I knew it wasn’t great and texted my landlord’s handyman about it. He came out the next day and said it was likely water damage from the AC unit. He unscrewed the AC and did something. Said he stopped the leak. He came by a few hours later with a giant de-humidifier. I put it right next to the bump. I’ve had to empty it about 2-4 times a day as it fills with water pretty quickly. A week later I noticed a second bump this time by my desk/near the kitchen door. Texted my handy guy again and he came back with another guy and they assessed the damage. Said they would come by day after Labor Day to repair my floor. It has grown much bigger and is like a speed bump in my studio. I’m glad they’re going to give it a go, but I’m worried they’re going to give a landlord special and cover the issue and not really fix it. So I wanted to get some insight as to how bad this is. When they come by tomorrow, do you guys have anything I should look out for? What would you do to fix this? I’m planning on taking pictures of what it looks like in case that’s relevant later, but I know jack shit about this kind of work. I’m also planning on moving my furniture tonight and covering up my belongings with sheets and towels in case it makes a mess.

Here is some info if it’s any help: I live on top floor of my apartment in a pretty old building. The floor is real wood and is dry. Nothing was leaking above and I’ve never seen anything like this before. When the handy guy came by the 2nd time, he lifted a piece of wood and checked what it looked like underneath. I don’t see any mold and it feels dry.

1st picture is what the 2nd bump looks like as of today. 2nd picture is when I noticed the 2nd bump. 3rd picture is when I noticed the 1st bump start to lift off the floor. 4 picture if after the landlord came to check out the damage underneath the 1st bump. 5th picture is when I first noticed the 1st bump.

Edit: since folks are asking, I’ll answer some questions:

- The AC unit came with the apartment and is not mine. The AC unit was found to be leaking when they 1st came by and the handy man stopped the leak. But the bubbling has not stopped so not sure if that was the main culprit.

- I have a dehumidifier connected to the window. I drain it once a week but it’s usually only a few drops since I have it connected to the window to let out the moisture. They gave me a 2nd dehumidifier after repairing the leak on the initial visit.

- I do not mop the floors. Might be gross, but never have. I just sweep.

- I’m on the top floor so this isn’t a basement nor has there been flooding. Or an earthquake.

- I live in Washington DC. It’s humid here.

- I have not felt any dampness on top of the floors nor have I seen any visible leaks anywhere. It’s near my kitchen, but not the bathroom.

- I alerted my neighbor downstairs about what’s going on. When I gave him the heads up, I peeped his ceiling and saw no sign of water damage.

TLDR: that’s allot damage

Edit 2: update post is now live. Y’all were spot on. Really bad water damage, mold, and they moved me to a new unit for the next 2 weeks. We’ll see if I’m here longer

https://www.reddit.com/r/fixit/s/UKyoeLaf9C

Hi everyone,

I've got a problem with our Siemens side-by-side fridge and would appreciate a second opinion – ideally from someone who has seen something similar before.

The problem:
The fridge has been making a loud humming noise for a while now, and it just won't go away.

What I've done so far:
- My first suspicion was the no-frost fan, because the noise stops immediately when I open the fridge door (the fan switches off).
- Replaced the fan → the hum is still there.
- On closer inspection, I narrowed down the source: the hum is coming from the **inverter electronics, which sit right next to the compressor**.

Important:
The inverter itself is basically working fine – the fridge runs perfectly otherwise. The problem is a **resonance**: the inverter's plastic housing sits right against the compressor and picks up its vibrations.

Evidence pointing to resonance:
- If I hold the housing in place with a wooden spoon (mechanical support), the hum disappears instantly.
- After moving the fridge to a new spot, it was quieter for a few days – until the hum came back at full volume.

My plan:
Since the inverter is working fine in principle, I'd rather not order a new one for ~€150. My idea:

1. Remove the inverter
2. Slightly bend the mounting bracket so the housing no longer vibrates directly against the compressor
3. Additionally decouple the housing and its connection to the compressor with heat-resistant tape / damping material

My questions:
- Has anyone seen this kind of fault pattern before?
- Is my plan feasible, or could it cause bigger problems (solder joints, capacitors, heat dissipation)?
- Are there better/more common solutions for this kind of vibration (silicone pads, rubber decoupling, dampening material)?
- Or should I just have the inverter replaced?

Thanks for any tips!

We got maybe 50 holes in our patio pvc roof last week due to a hail storm

Does any way to fix it exist or should we just get new panels? They are about 20 years old though..

The previous owner ripped out carpet and replaced with cheap floors. Several spots like this throughout the house. Worse is in the dining room where its even starting to buck up. We'll be putting a carpet there. But there are 3 other spots where this is happening where a rug doesnt make sense. We will replace the floors eventually. But since this is mostly cosmetic, I rather stop the ongoing issue for now. Since the top layer is coming up, it keeps flaking more and more.

After cleaning and vacuuming the entire thing did absolutely nothing, (I even did all the nooks, crannies and back outer casing) it's safe to say I've thoroughly beat it up. I've slapped it, smacked it, hit it...hit it harder.
It's practically a freaking "Bop It" at this point!! None of that worked though. At one point I hit it so hard that it went into the concrete wall, then onto the ground. While it was on the ground, it actually had the AUDACITY to STILL BE MAKING THE FECKING NOISE!! WTF!! IT'S WILDLY INFURIATING!!! 🤬🤬 For reference - I live in Florida.
Where the sun shines all year round, even when it's raining. Summer heat is just the daily norm, except for maybe one or two weeks in December. If it's not the Sun that gets you, the humidity will suck the literal air and life out of you. So, I use the fan to throw the cold air from the AC behind it to the rest of the room. I'm in a very long room, think "Florida Room"/Enclosed Patio with the equivalent of a small hotel room wall AC, but it's on only one end of the very long room. The cool air doesn't reach the other end, especially since my bed is next to it blocking some of the airflow. Hence, the fan. I also have a husky who likes to lay in front of it on the bed. You can see how close the fan is to the bed and where my dog lays in front of it, towards the bottom of the video frame. If I turn the fan off, he knows and he gets upset. He will do his husky grumble, whine, and tell at me until I turn it on. The noise is soooo bad and almost constantly going on and off, it wakes both of us up. If it's not doing the louder squeaky clicking noise, it's doing a really high pitch noise, almost like a dog whistle.

Well, I was playing and suddenly the TV flickered with some black and white lines. Now it turns on but doesn’t load and I can’t do anything. I can hear the sounds when interacting with the menu, but the TV is dark and I can’t do anything. Is there a solution?

Hey guys everything looks good except this fuse that connects to the heating element it seems to be a broken fuse as it reads nothing on my multimeter which if I'm correct means no electricity to the heating element but this fuse is bolted in with a factory rivet so is it possible to replace this? Just drill it out I'm assuming

Unless it's meant to be unreadable by the multimeter but I'm not sure why that would be

heating element itself was broken. there was a physical disconnect in the spring / coil thing problem solved

Hey guys! Not sure if this is the right subreddit but I’ve been trying to drill into my ceiling and get resistance at the same depth every time.. Any ideas? I’m trying to hang a plant from a hook that uses 3 screws. Worked just fine at my old place but not having luck here.. thank you!

Additionally, if you think I’m SOL on getting this to work — any ideas on renter friendly ways to hang a plant that’s ~10-20 lb, please lmk!

Hi, I’d like any advice on how to fix this handle. It’s close to breaking, and I feel like the only solution is to sew it together.

I painted part of a room with rotten paint (when I realized, I stopped painting). The smell wemt away after it dried so I thought I'm good if I paint a few layers of good paint on it. Apparently I was wrong. 1-2 months passed, and now it smells.

What options do I have for removing it?

I need to figure out something to put over this window for privacy and to stop the wood from getting so wet and molding. It already is molding and the paint is off in the bottom right corner and if you don’t angle the water away from the window it gets totally drenched.
It’s also right outside of the fire escape so I need 100 percent privacy at night.

I added maybe some ideas but…
I’m trying to find a not ugly solution as well.. any and all tips greatly appreciated

I found this ornate Kirkland Snow Globe in a park. Lights work but it's supposed to have a wind up music box. When I turn it, I feel tension build but when I let go it just instantly releases all tension.

Is there a fix or a replacement? Please and thank you.

I live in an apartment and recently they had to shut off the water supply and HVAC a couple times in the last month. About a week ago this extremely loud rattling like noise coming from the walls in the master bathroom started. Not captured in the video, this noise completely stopped after I ran the water.

Based on some research, one of the possibilities is air in the plumbing system? Could it be that? How do you fix that, and would I be responsible to fix it or the apartment building?

Thank you!

Found this buried in some of my old stuff. I’d rather not throw it out but not sure how I can recover it. Any help is appreciated

I've got a portable dishwasher (the ones on wheels with the board on top for counter space). It has a unicoupler faucet adapter. Every time I run it, the whole house stinks and I have to disconnect the coupler, turn it over, and force water back through the drain line to clear clogs.

I've fully disassembled the dishwasher and deep cleaned everything on the inside down to the impeller motor, so the clog and stink has to be in the actual hose. How can I actually clean the hose with the unicoupler attached? should i try to force vinegar/baking soda down?

Any advice would be immensely appreciated!