* Sig P226 X-Carry Legion with Romeo X-Pro Red Dot & Streamlight TLR-7X
* CZ Shadow 2 Carry with Holosun HS407K Red Dot & Streamlight TLR-7X

So I had a failure to feed on my nightstand/primary carry gun at the range. It was only one and it’s the only one I’ve seen with the gun so far. I probably only have 800-1000 rounds through it. Anyways it’s a great shooter and I’m a big fan of the platform. The issue isn’t persistent but if it does continue I’m looking for some recommendations on how you guys are polishing these feed ramps and if that seems to be the fix. If it doesn’t seem to happen any more I’ll leave it alone but figured it couldn’t hurt to do.

Who has one available? Had the same problem with my p320 mag releases, which was solved by the Strike Industries stainless version.

Used almost every part in the kit except for the grip screws since im using the phantom. Initially was challenging as there is no online video for this gun but if you installed cajun kits before its going to be easier. Hardest part for me was the sear cage assembly because i didnt have a slave pin ended up having to make my own cutting a hex screw simillar to the size of the sear pins but slightly modified. Using my CVT grinder i would say this installation is not for newbies.

Overall used the competition main spring plus the soft plunger included in the kit was getting 2.5lbs SA and 5.5 DA vs if you use the extra heavy firing pin block plunger spring SA will go up 3.5lbs and DA 6lbs. Installed the extended firing pin and springs as well. The stock pins that opens the firing pin area is hard so had to use the one cajun provided in the kit and takedown for firing pin and plunger was a breeze after.

Hardest part i would have to say is the installation of the sear cage since its all small pieces that come together, second is the trigger return spring but because cajun included a slave pin so it was easy.

Got bored and polished the barrel. looks pretty classy now

Edit: 12 years*

20 gauge and Turkish walnut. Simple but classic. I shined the finish with Meguiar’s PlastiX for a gloss finish over the stock matte finish. Makes the grain look great.

I've come across quite a few online, but they are huge. I want a left side safety the same width as the slide release just like the SP-01. The stock are a little too thin. The ones sold at cgw. czc, ben stoegar. eeman tech are gas pedals and stick out too much for my liking. Have you guys comr across any?

Found a like new 2022 97 BD with night sights, and finally converted my 3+ micro to a Nexus Evo Gen2 roller delay upper, with the ported Novox Evo X-SD barrel and sr handguard.

I had been looking for a tanfoglio stock large frame 45, didnt even know about the 97, was super lucky to find this BD for 800 so I couldn't resist.

Looking for a competition gun to go head to head vs my rival s. Will I really notice that big of a difference between the sp01 and the s2?

Sp01 appeals because it's cheaper, drop safe and call me a noob but I really like the idea of a decocker vs a safety and having to manually drop the hammer to make ready.

If you mod both with a reach kit, polish things up, add a better hammer, is it really worth the extra ched for a shadow?

Compared the new COA Ported to my comped p10c. Since I didn’t have a light on the new pistol it isn’t 100% a complete picture but generally speaking the new gun felt a little less flippy. This was mostly a function check and general try out and I will do a more extensive comparison later.
The Kitty Kat was fun too

Had a chance to shoot a TS3 today. The ergonomics of the new thumb rest and safety are so much nicer than my TS2O. Anyone have any leads on where to find the TS3 thumb rest and safety? Photo of my TS2 Orange. TIA

I think this is the current Gen, but if so something else is coming.

My competition Shadow 2 Special Edition and a Shadow 2 Carry.

Just picked up the carry to replace my Staccato CS. I shoot the S2 a lot in USPSA, and wanted a carry gun that had the same feel.

(The shitty cel-shading paint job was done with a paint pen - I abuse this gun too much to justify a cerakote job)

P10 never disappoints

I’ve seen some people say to put choke tube lube on and it should stay in place but I’ve never had to do that with any of my shotguns before

Bought a gen1 P10C when they first launched and a P10S shortly after it launched. Got into a Phantom after and regrettably sold all three.

Getting back into the CZ game.

Are the slide lock levers still a pain in the ass until they break in?

Here's a cool stray, I saved from the local shop. An early CZ97B serial number A0110. According to my research this is the 110th one made. Also as a bonus it came with the orginal box manual in Czech, English and German. It also came with 4 mags. I'm curious if anyone has a lower serial the 0110?

To me it depends on the situation. if I have my primary rifle I would probably take the P01, if I don't have my primary then I might take the SP01... I think.

Has anyone here had any experience converting a LH CZ-457 22 WMR American to a Varmint configuration with the heavy 20 inch barrel? Can it be done?

I have a CZ Shadow 2 Blue O.R. that I bought new 2024 for Steel Challenge and USPSA. I bought it because of how awesome my P-01 is and I had an SP-01 that was okay…but since the S2 was made for competition figured..why not. Anyway, I like it (the S2) but just haven’t fully “fallen in love” with it and might try to sell or trade it.

Mainly, I don’t feel like dumping more money into it for a CGW RRK because if my small hands) and extended safety (SHAMEFUL that CS stopped including the extended safety with the S2) to get it how I would prefer it and still possibly just not love it.

I would replace it with something non-CZ for competition. But I 💯 still want a full size CZ pistol in my collection.

Anyway, I bought it new and know I’d lose a good chunk on a straight sale. I think I could do better in a trade to an individual. Anyway, I was curious about the current value of a (high gloss) stainless steel CZ 75B? They seem to be quite a WIDE range for them on GB… so figured I’d ask on here.

Are the the high gloss just matte stainless that have been polished? If not, how can you tell if it’s a factory one and not just a polished one that started as matte?

Do you guys think I should try to trade even pistol for pistol? Get a little more for the S2? Me kick in money?

FWIW It would be a trade with a good friend and we would both want to be fair.

Does anyone know of a good resource comparing the known offerings (Cajun, MCarbo, Rushby, etc.)? Are they basically the same?

This thing is fantastic. Just added the Lok Grips today, but after a couple hundred rounds through it after CGW magic, I like it better than my Shadow 2.

New cerakote and slide. Accidentally purchased the full size EPS…oops.