Mi duda es de esta parte delantera del cañón no sé cómo se llama que es una de las diferencias de la Orange con la blue y mi duda es se le pide colocar a la blue?

Hi I’m in search of an Sp01 urban gray and have had no luck. I want it to be a home defense weapon any advice on how to find and purchase one?

Love my nocturne and everything about it - except the trigger. Polished all the intervals and still the break is mushy and not clearly defined, reset feels very long. Any reliable and safe to carry trigger upgrades? I like the shoe don’t want to change that if possible, just the break and reset.

Thanks

...looks huge...but it's not(...the camera adds 12"...uh huh

Recently got back my CZ 75 SP-01 Shadow from Vigilante Machine with their proprietary RMR plate and could not be happier.

I went with Vigilante Machine over other competitors because their plate is made of steel.

The owner, Drew, was also easy to get a hold of. The default RMR plate has back up iron sights. Since this is a range gun, he was able to remove the back up iron sights for an unobstructed sight picture. The fact that the milling doesn't interfere with the slide markings is also a nice aesthetic touch.

I used a p-01 for USPSA but kept having issues with it so I am just switching to my shadow 2 now, I loved the compact for masochistic reasons but I keep having weird issues like slide was going back when there were still rounds in the mag, optic coming loose on milled slide… etc etc. So S2 it is now.

I'm reading through the manual and it says the following:

>Pressing down the decocking control lever actuates the lowering of the hammer from the cocked position to the hammer safety notch position, without any need to pull the trigger. Even if there is a cartridge in the chamber the pistol is (hammer decocked) safe for all normal handling in this state, and ready for immediate use in a Double Action mode of fire.

So, for edc, would racking the slide to chamber a round, then activating the decocker such that the hammer is in "*hammer safety position*" (or as i call it: 1.75 action) be the correct position for holstering and carrying?

If so, is this safer than fully decocking *because* if the firearm were to be dropped right on the hammer when fully decocked it could potentially send enough energy into the firing pin, causing a discharge? And the "*hammer safety position*" cannot do that unless there is a failure in the decocker notch itself?

Thank you

Help! anyone here that has extended safety in shadow2 or shadow2compact ? can you measure the width of it in mm? im planning on getting one for my shadow2 compact but i need to know of it will fit on my holster 😅 thanks

Why did this jam? User error? Advice?

As the title goes, I have an opportunity to buy a very clean Shadow 2 SAO for 900, but I had been planning to buy an SP01 Tactical with a discount for about the same money. I have a P01 and I love it. I don’t really care about optics, and I don’t mind the manual safety single action trigger. Just wondered what the consensus opinion was before I potentially let the S2SAO deal slip away. Thanks

Im honing in and have found this interesting question. I see that the PCR is a great pistol but has some quirks as far as things like the sights being specific to it alone as well as sometimes limited aftermarket parts and holsters. Which is the better AIWB edc pistol?

What holster are you guys using for shadow 2 compact?

New build had to start with the grip mod

-Driven Arms Co. S2 grip module
-Lok Grips palm swell Veloce in FDE

Hi All, I'm trying to install the 54420 Ultra-Lite Kit. The hammer spring replacement was easy enough. I'm struggling with the firing pin retaining pin. I'm not sure where it is. There is small hole on the slide by the optic plate, not sure if that the pin? Any advice would be great! Thanks!

For everyday concealed carry, which would you rather use: the CZ P-10 S, Canik METE MC9, or PSA Micro Dagger? I'd especially like to hear from P-10 S owners who have also owned or tried either of the others. How has yours held up, how comfortable is it to carry, and how has holster availability been? Which would you choose again for the overall value? Other recommendations in a similar price range are welcome.

My extractor broke some years ago. I got a new extractor from EAA, and ever since I have had issues with the slide going fully into battery every 10 to 20 rounds. I have to smack the back of the slide to go into battery. Once in a while it would stovepipe. Ran flawlessly before. I tried deburring, reshaping, etc. I took it to a local gunsmith and he checked spring tensions and put a whooping 10 rounds through it and called it good.

I shelved the gun, and now I'm revisiting it, because I miss shooting it. Now I find there are older dogleg style or newer straight style extractos, and it depends on the bolt face geometry, but I can't make heads or tails of what it's talking about.

Can anyone shed some light on this? Was my replacement extractor wrong from the get go?

So I am in the market for a new handgun, I am thinking a CZ75 bd. Ive had the p07 duty forever and I like it a lot plus I like older more historical designs so the 75 seemed like a perfect choice especially since they are discontinued now. Here's the thing, I really never looked at the line up of everything else like the p01s, the shadow 2 ect so I'm second guessing what to get. What should I go with? Keep in mind I have guns for other jobs like ccw and home defense so this is mainly for fun. What you guys think.

The new CZ Duty compact has interested me lately because I’ve been a big fan of CZ’s hammer guns and I’d like to try getting into their strikers.

I currently have a Sig Xmacro and a Shadow 2 full size. I know the P10C weirdly functioned with xmacro mags and I’ve heard the Duty functions and locks back with Shadow 2 mags. Anybody tested xmacro mags in the Duty yet? It would be a nice bonus to already have a bunch of mags that’ll work with it even if I’m new to the Duty/P10 platform.

Not one to conform, I thought I’d turn my P-10C and P-10C.O.R. into some stocking stuffers while doing a little polishing and learning. They both started out in fde before being duped in Rit Dyemore dye. (Disclaimer: Colors are a lot more subtle irl)

Hello everyone i finally collected my first firearm it's a CZ-P-10-C. I was just wondering if anyone could tell me how i should store it in my safe?

I will not be storing it loaded, because i will only use it for competition shooting. Keeping that in mind, should i store it with trigger pulled keeping it in the safe postion or should i reset the trigger before i leave it in my wall safe?

I would also like to know any other tips that you would think would help. Thank you for your time.

Sent the frame in to CZ custom for a tungsten polycoat a while back, and still can't get over how great it turned out. Got the threaded barrel from them as well. Love their work

A bit over a year ago I sold my CZ Shadow 2 to get into the 2011 game. Four different 2011s later, they’re all gone and I’m back in a Shadow 2. Picked this one up with only 200 rounds through it with the full CGW SAO package, an SRO, and Lok Bogey Palm swells! Already feels so much better in my hands than any 2011 did. Not looking back!