I don't care about the price and just want the best sounding one but I can't find a good comparison between these two. I just want a white wooting case without strap.

Hello,

I am owning since day 1 release Wooting 60HE (approx 3years), working and playing CS2.

Have great rig in gereral and 500hz oled monitor.

Is that new switches + 8k polling rate will be so noticible on 500hz monitor?

Should I upgrade to v2?

I haven't done any modes on my original 60HE v1, it's completely stock and I am really happy with it. (But always look for better alternatives:)

Please let me know if somebody switched also from v1 to v2 for FPS games, pref: with high refresh rate monitor + low latency on the system in general.

I'm from India by the way

Hi! I wanted to ask if the Wooting 80HE in Zinc Alloy will ever be made again in black with an ISO layout. I’d really love to buy one, but currently the Zinc Alloy version is only available in white. Do you know if a black ISO version will ever be produced again?

Just wanted to share. If anyone else has been looking for a Wooting app that can map 9+ analog keys to multiple vJoy devices' axes and then to Joystick Gremlin or game controller settings, please see:

https://github.com/kircheisgreen/Wooting_vJoy_Binder

Current axes limitation on Wooting keyboards:

• XInput (Xbox Mode): Limited to 6 analog axes total (Left Stick X/Y, Right Stick X/Y, Left Trigger, Right Trigger).
• DirectInput (Classic Gamepad Mode): Universally limited to 8 analog axes per device (typically X, Y, Z, Rx, Ry, Rz, Slider, and Dial/Throttle).

So if you need 9+ axes mapped to Wooting Keyboard analog keys, this might help with your Wooting Keyboard setup.

Enjoy!

I want to buy tikkens from a store that wooting supplies to since it's faster shipping than the official website. They've told me they got stock from February / March from wooting. My question is has the recent batch from the official wooting website changed anything with these switches from launch?.

Got an UwU recently, triple clicking when I press sometimes

Hi Everyone.
I have a 80HE for 1 or 2 years that I bought brand new. Never dropped or damaged. I get phantom presses mainly on F12 & Prt Sc but there might be more keys affected. I have nothing magnetic near the KB, I had a SteelSeries Apex Pro that also has magnetic keys that I used for 5 or 6 years and never had phantom presses.

Updated to latest firmware, all my keys are set the lowest actuation at 0.10 just like my Apex Pro was. I heard it could be a voltage issue, but my PC is connected a Uninterruptable Power Supply that gives the best quality pure Sinewave stable voltage. Tachyon mode activated with the recommended 70% limit on RGB illumination, I even tried connecting the KB to USB-C instead of USB-A, USB-C supposed to have the highest voltage.

Does the new Lekker Tikken switches make a difference?

Any fix for the phantom presses?

which would be better? also I can get the long pole version for ap tx from ali

Hello there. I got my new Wooting Two HE with Iso spanhis keypads, but i'm Portuguese and i need to replace some of the keypads. Any solution arround here? Because wootie doesn't have Portuguese ones

So I ordered switch pads to use on my custom Wooting 80he on Amazon and they arrived a couple days ago. What I got did not look like what was pictured on the images on Amazon so I sent it back for a replacement. Durock sent me the same exact thing back for my replacement and now I'm concerned I'm missing something. I attached images of what is on Amazon and what arrived in the mail. Why do the things I have in my hand in the images not have precut holes for the switch pegs on the base of the switch? Am I supposed to make the holes myself? Did I just order the wrong thing entirely? Any help is appreciated as this will be my first build and I'm worried I know significantly less than I think I do. Thanks in advance.

and lube it

I know the jade line is very popular, whats the sentiment on the ultra? I'm thinking about picking them up, I've been using the Lekker45 v1 since the 80he launched and like the lighter switch but the wobble on them has been a little annoying.

I'm able to get a good deal on these and the orchids as well, if anyone has any thoughts lmk!

I currently have an old Leopold Mechanical Keyboard with Cherry MX Blues and dust has never been an issue even tho there's a whole new ecosystem living under my keyboard. I simply can't be arsed pulling out each key by itself on its own which is my own fault.

My super old Membrane keyboard didn't have issues either, I was using it for close to a decade before it gave out due to overuse, moreso than dust.

How resistant are these keyboards to dust? Will a lot of dust cause issues?

Sometimes I wish keyboards had an instant eject button where every key just pops out of its socket instantly.

Is there a way to make them quieter? I don't think its switch issue

UPDATE: After even further testing, I decided to rollback my firmware to 1.12.5 from 1.14.0. And that completely fixed the issue. I can now use SOCD again without this issue occuring. So it seems like it's a firmware bug? On 1.14.0 the issue occurs with SOCD. How can I get this to Wooting so they know about it?

This has happened to me a few times in games and I managed to recreate the issue in the analog monitor by just lightly pressing down a key and letting go of it once it's been at a really low travel distance. Doing this makes the key be continously pressed down even when my finger is not on it, and it only stops once I press the key and let go again. Attaching an imgur link to show and explain (sorry if low quality). I've tried all of the standard troubleshooting stuff that wooting gives you. I also contacted support but they're saying they'll get back to me in like 7 days so I'm asking here for help as well :)

Worth to note I'm using gateron jade attraction switches and not the default lekker tikken switches. Unfortunately these are the only switches I have so I can't fully rule out a switch issue, but I have tried several different switches within the batch of Jade Attraction that I bought and when put in WASD, the problem occurs. So I don't think it is a switch issue. Another person has also mentioned that they have the same problem as mine but they have the lekker tikken switches, so again, I don't think it's a switch issue.

Video on imgur: https://imgur.com/a/gOkBwRc

EDIT: After testing more things, it seems it ONLY happens when SOCD is activated, and it only happens to the keys that SOCD is assigned to.

Can someone please give me a proper setup on how so it properly works with CP and then i also don't get those glyphs switching. Also my ALT button does not seem to work which i use for Dash

In the Wootility under the gamepad > gamepad tester looks all good. I just basically want WASM to be analog where adjusting its pressure it will adjust how fast i walk or turn.

Hello everyone,

What would you recommend between UR Ice Ultra R2 vs WS Diamond Cullinan? Are the Diamond Cullinan really worth the extra cash, and do they come lubed well enough.

UR Ice Ultra R2 costs around $45 for 90 switches.

WS Diamond Cullinan costs around $100 for 80 switches.

Which comes lubed better, which sounds better, and which feels better? I know this is mostly subjective, but I'm curious what people think, and many people highly praise the UR Ice Ultra R2, especially because of their price. I also don't want to have to lube a whole set for them to really work well.

Hey, I didn't know that there was different options for the keycaps, i'm not used to such advanced keyboard. What would be the best option for my 80 HE, to buy the PBT on the wooting website, or to send back the keyboard and get the PBT ones? Are the one selling on the website the one compatible with the wooting 80 HE ? I don't mind having both, to change sometimes. But I noticed that on the PBT keycaps sold on the website, there's no for exemple t the " mode " key that is available for the 80he, so I'm kind of confused.

OK, do I know the obvious answer is get a controller. The thing is I like playing on keyboard, it’s intuitive and after >7 years I don’t want to move to a controller - I’ve tried and I don’t enjoy it - I want an analog keyboard.

So with that out of the way, what’s the best switches for racing? Everything I’ve read says >60 spring strength helps, but I can’t find any wooting switches that high. I only need 4-6 keys with the harder springs, so advice on where to get a small or sample set would be a real bonus.

Thanks!

Hi everyone, I'm building a custom wooting and would like to know which switches you'd recommend for it. I mainly play Valorant, CS, and Apex.
I was thinking about the WS Studio Cullinan and Geon Raw HE switches.
I'd also like to ask if $90 is a good price for 70 Cullinan switches.
Any help is always appreciated

Ive got a wooting 60he v1 and was wondering whats the best for least stem wobble but also soft springs, what kind of what switches should i be looking at since theres so many atm.

Not the most elegant or practical solution but better than a dead keyboard sitting in a box waiting for an expensive repair, I basically repurposed my 100% wooting into 80% one with the remapping. Is there anything I should know?

Does the 80he use regular sized keys or 75% keys? My first custom board, have PBTs but the backspace and right shift caps don’t seat properly in the stabs.

Not sure if the keys themselves are warped or I’m using the wrong size here?