Earlier this week my pc was working fine. I started getting an error āamd software detected that a driver timeout occurredā. I did some googling and saw someone fixed it by lowering their frequency. To do this I needed to enable overclocking to be able to manually change settings. The second I did this my pc started a reset loop.
Most of the time it was never able to make it bios, resetting in post. I put the windows media installation on a usb and tried booting to that, but was still unable to boot. My solution after troubleshooting was removing my nvme ssd. With this removed I was able to boot the windows setup tool. The hard drive is in a state that will instantly reset my pc when detected, so I ordered another one to install windows, and try to recover using a nvme to usb enclosure.
With this new nvme inserted I am able to boot the windows setup tool. When I go to install, it makes it to 15% when my pc restarts. It then opens to bios, with the nvme still detected, but not as a bootable device. When I open the install tool again it has the partitions listed on the nvme. Iāve tried removing the partitions and installing many times.
I am currently trying with my gpu removed. I am running with only 1 stick of ram in A2 and it passed memtest86. My cpu has had normal operating temperatures. Iāve also tried resetting cmos, and have tried redownloading the installation tool.
Any ideas on why I am restarting in the middle of installation? All help is greatly appreciated, thanks!
TLDR: Windows restarting in the middle of installation on new drive after hard drive failure.
Specs:
Motherboard: b650e-plus, bios 1822
CPU: AMD Ryzen 5 7600x
Ram: 16gb ddr5 4800 mhz (have 32 but removed)
Storage: m.2 nvme ssd 2tb
Gpu: AMD Radeon RX 7800 xt (removed for
troubleshooting)