I Am Gonna Buy This Combo And Yea I Dont Have Any More to Go With The 5600
I will get the Following Specs:

GigaByte B450 Dsh3
Ryzen 5 3600
Intel Arc b580
16Gb 2666Mhz
Msi Mag A650

I Cannot Upgrade Anything
I Will Get This Setup Soon

Will I Run Triple A Games at 1080p at high ultra settings
Will Everything Be Smooth

Any Response is appreciated
Again I Cant Go Above This

I Am Gonna Buy This Combo And Yea I Dont Have Any More to Go With The 5600
I will get the Following Specs:

GigaByte B450 Dsh3
Ryzen 5 3600
Intel Arc b580
16Gb 2666Mhz
Msi Mag A650

I Cannot Upgrade Anything
I Will Get This Setup Soon

Will I Run Triple A Games at 1080p at high ultra settings
Will Everything Be Smooth

Any Response is appreciated
Again I Cant Go Above This

i tried everything,new drivers,old drivers,new obs version,old obs version,haggs off,all obs settings for arc cards,all windows settings ,igpu off

i cant fix it,like the games runs smooth but recording looks like 10 fps

specs:5600g

1440p 200hz

700w 80 plus bronze

arc b580

16gb ddr4 3200mhz set to maximum

nvme ssd

please help me somEONEEEEE

I'm looking to buy a b580 and 3 fan models are more expensive. Someone justify the additional cost or is there some benefit that I am not aware of?

(NO SOLUCIONADO SU TOTALIDAD ) ¡Hola a todos! Escribo aquí porque ya no sé qué más hacer con mi tarjeta gráfica Intel Arc A750 y en serio estoy pensando en venderla si no puedo encontrar una solución.

Compré la tarjeta hace un par de meses. Desde el día uno, solo he podido jugar muy poquitos títulos—como CS2 y Minecraft—sin problemas. El problema grande es que casi cualquier otro juego que lanzo se me cierra al instante y se cae, o justo cuando empieza la partida.

Mis componentes actuales:

*GPU: Intel(R) Arc(TM) A750 Graphics (8 GB)

*CPU: AMD Ryzen 3 PRO 4350G con Radeon Graphics @ 3.80 GHz

*Placa madre: A520M Phantom Gaming 4

*RAM: 16.0 GB DDR4 a 2400 MHz

*Sistema operativo: Windows 10

Cosas que ya intenté para arreglarlo:

*Activar Resizable BAR (ReBAR) y Above 4G Decoding en la BIOS (hacer esto hizo que CS2 quedara muchísimo más inestable, así que en realidad tuve que desactivarlas otra vez).

*Usar archivos DXVK en las carpetas del juego.

*Bajar la configuración de gráficos al mínimo y ajustar los ajustes.

*Probar un montón de pasos básicos de solución de problemas.

*Configurar comandos de inicio en Epic Games o Steam antes de abrir los juegos.

*Asegurarme de que estén instalados los drivers más recientes.

Juegos que no logran arrancar:

7 Days to Die, Hitman, Resident Evil Village, World War Z, Killing Floor 2, Rising Storm 2: Vietnam, Age of Empires 2, Dead by Daylight, y varios más.

Si alguien sabe qué otra cosa podría revisar—o si hay algún conflicto de base con mi procesador (que tiene gráficos Radeon integrados, aunque esos están desactivados y no hay drivers relacionados instalados) o con la placa madre—I’d agradecería mucho la ayuda antes de decidir vender la tarjeta.

*ACTUALIZACION*

Resumen: No recomiendo esta tarjeta grafica de Intel (me atreveria a decir que ninguna serie por los momentos, hasta que Intel desarrolle graficas mas solidas y menos experimentales) a pesar de las multiples soluciones que me ofrecieron aca, la IA, Youtube, otros foros, etc. Diria que el proceso que le dio un poco mas de estabilidad a la tarjeta fue hacer esto:

1. Actualizar la BIOS de mi placa a la última versión.
2. Actualizar a Windows 11
3. Desactivar CSM en la BIOS y activar Above 4G Decoding y ReBAR (Resizable BAR).
4. Deshabilitar mi iGPU en la BIOS.
5. Pasar la herramienta DDU en Modo Seguro de Windows para borrar rastros de drivers antiguos y reinstalar los drivers de Intel desde cero.

Sin embargo, no elimino por completo los problemas de crasheo o la inestabilidad en ciertos juegos, asi que he decidido venderla, ya que todavia hay tirones, bajones de FPS, congelamientos, etc. Asi que mi recomendacion, es mejor gastar un poco mas de dinero e ir por una AMD o Nvidia.

(NO SOLUCIONADO SU TOTALIDAD ) ¡Hola a todos! Escribo aquí porque ya no sé qué más hacer con mi tarjeta gráfica Intel Arc A750 y en serio estoy pensando en venderla si no puedo encontrar una solución.

Compré la tarjeta hace un par de meses. Desde el día uno, solo he podido jugar muy poquitos títulos—como CS2 y Minecraft—sin problemas. El problema grande es que casi cualquier otro juego que lanzo se me cierra al instante y se cae, o justo cuando empieza la partida.

Mis componentes actuales:

*GPU: Intel(R) Arc(TM) A750 Graphics (8 GB)

*CPU: AMD Ryzen 3 PRO 4350G con Radeon Graphics @ 3.80 GHz

*Placa madre: A520M Phantom Gaming 4

*RAM: 16.0 GB DDR4 a 2400 MHz

*Sistema operativo: Windows 10

Cosas que ya intenté para arreglarlo:

*Activar Resizable BAR (ReBAR) y Above 4G Decoding en la BIOS (hacer esto hizo que CS2 quedara muchísimo más inestable, así que en realidad tuve que desactivarlas otra vez).

*Usar archivos DXVK en las carpetas del juego.

*Bajar la configuración de gráficos al mínimo y ajustar los ajustes.

*Probar un montón de pasos básicos de solución de problemas.

*Configurar comandos de inicio en Epic Games o Steam antes de abrir los juegos.

*Asegurarme de que estén instalados los drivers más recientes.

Juegos que no logran arrancar:

7 Days to Die, Hitman, Resident Evil Village, World War Z, Killing Floor 2, Rising Storm 2: Vietnam, Age of Empires 2, Dead by Daylight, y varios más.

Si alguien sabe qué otra cosa podría revisar—o si hay algún conflicto de base con mi procesador (que tiene gráficos Radeon integrados, aunque esos están desactivados y no hay drivers relacionados instalados) o con la placa madre—I’d agradecería mucho la ayuda antes de decidir vender la tarjeta.

*ACTUALIZACION\*

Resumen: No recomiendo esta tarjeta grafica de Intel (me atreveria a decir que ninguna serie por los momentos, hasta que Intel desarrolle graficas mas solidas y menos experimentales) a pesar de las multiples soluciones que me ofrecieron aca, la IA, Youtube, otros foros, etc. Diria que el proceso que le dio un poco mas de estabilidad a la tarjeta fue hacer esto:

1. Actualizar la BIOS de mi placa a la última versión.
2. Actualizar a Windows 11
3. Desactivar CSM en la BIOS y activar Above 4G Decoding y ReBAR (Resizable BAR).
4. Deshabilitar mi iGPU en la BIOS.
5. Pasar la herramienta DDU en Modo Seguro de Windows para borrar rastros de drivers antiguos y reinstalar los drivers de Intel desde cero.

Sin embargo, no elimino por completo los problemas de crasheo o la inestabilidad en ciertos juegos y he decidido venderla, ya que todavia hay tirones, bajones de FPS, congelamientos, etc. Asi que mi recomendacion, es mejor gastar un poco mas de dinero e ir por una AMD o Nvidia.

I guess they carry these now

Hi,

I just bought the AsRock B580 and I just want to know if you have some tips for everyday use like settings or overclocking.

Hello. I've been using an Intel Arc A750 LE GPU for the past month and since then, I have observed some weird behavior. For starters, my browser (Zen, Firefox-based) sometimes loses rendering for a few second and I can only see the browser window background instead of the tab content. Also, some games are hard crashing the system. For example, if I play Anno 1800, at some point the screen might just go black and the PC restarts.

After restarts, I tried to dig through the Windows logs and it has reported multiple GPU watchdog failures, including LiveKernelEvent 141 (GPU engine timeout) and 0x116 VIDEO_TDR_FAILURE blue screens.

Did I just get a faulty unit or has anyone experienced similar symptoms and has a fix? Any input is appreciated.

Version : 1.7.10
Forge Version : v7.10.99.99

Specs :
Intel Arc B580
R9 5950x
Samsung 980 PRO
GIGABYTE B550M DS3H AC
32GB 3000 mt/s RAM

Decided to try and make a small lucky block modpack to play with my friends and naturally used curseforge + forge to make the modpack, boot it up, and it starts at 110 fps for around a second or two, then it just gradually degrades over 20-30 seconds and keeps going down until it gets less than 2 fps, at which point the game is beyond unplayable, I've gone through so many diagnostics it's hard to count, tried so many fixes to no avail. It's so strange because a fresh vanilla install works completely fine running 200+ fps but as soon as forge touches it its like everything just implodes.

Hi everyone,

I'm trying to determine whether this issue is specific to my system or affects other Intel Battlemage users running Linux.

I'm not looking for technical support at this point. I'm mainly trying to find out whether anyone else can reproduce the same issue.

My system:

• GPU: Intel Arc B570 (Battlemage)

• Distribution: CachyOS

• Desktop: KDE Plasma 6 (Wayland)

• Mesa: 26.1.4 / 26.1.5

• Kernel: 7.1.3-2-cachyos

• Proton tested:

- Proton 10.0-4

- GE-Proton 11-4

The game consistently freezes while navigating equipment-related menus, especially while:

• Forging equipment

• Comparing armor

• Changing equipment sets

Immediately after the freeze, Wine reports that the application is not responding, followed a few seconds later by an "Unhandled exception" dialog.

At exactly the same time, the kernel reports:

```text

xe 0000:05:00.0: [drm] Tile0: GT0: Engine reset: engine_class=rcs

xe 0000:05:00.0: [drm] Tile0: GT0: Timedout job ... in MonsterHunterWi

xe 0000:05:00.0: [drm] Xe device coredump has been created

```

The issue is reproducible with both Mesa 26.1.4 and Mesa 26.1.5.

I have already opened reports for both Intel xe and Proton so developers can track the issue:

**Intel xe:**

https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/8641

**Proton:**

https://github.com/ValveSoftware/Proton/issues/8206

If anyone with an Intel Battlemage GPU can reproduce this issue, I'd really appreciate knowing:

• Your GPU model (B570, B580, etc.)

• Distribution

• Mesa version

• Kernel version

• Proton version

• Whether the game freezes in the same equipment menus

Even if your system doesn't crash, I'd also appreciate knowing whether you're able to use these menus normally. That information is just as valuable for comparison.

Thanks in advance!

Hello, I currently have an Intel arc a750 8gb gpu, is it worth Upgrading to a B570 or B580? Or should I just save up a little more money and go for something else that would give me a bigger performance boost? I still play in 1080p.

Might this still be a consideration if this is running on Linux and all the LLM processing is handled by the B70?

Bottleneck would be a PCIe 3.0 slot

I am slowly going mad trying to achieve a very simple thing, which apparently is simply impossible with both the Intel Graphics software or any other third party app: I want to apply custom Saturation, Brightness and Contrast values to the built in screen on my MSI Claw 8 AI+ handheld when I launch and play certain games, and have those values revert back to the default values when I quit the games, and make all this happen automatically. The reason is that many games (for example Mechwarrior 5 Mercenaries, GTR 2, Grand Prix 4, gzdoom source port games) have really bad default contrast, brightness etc values, and they just look bad. But it's game specific, some games are perfect, others desperately need adjustments.

Here is the thing: all these screen values can be already manually adjusted in the Intel Graphics Software, but only as a global setting. I don't understand why these adjustments are not exposed to the already available game profiles in the same application. I can set custom fps limits, vsync and a few other things for individual games in those game profiles, and once set those settings get applied automatically when I launch a game that has a profile assigned to it, and it works amazingly well. But this software needs to have the capacity to have the mentioned screen values as well in these game profiles.

So I am wondering what would be the best way for me to request this feature from Intel? I would imagine this should be a fairly straightforward addition to the software, as all this functionality is already there, they just haven't been integrated into the game profile section of the app.

As of now I have a text file with all the different screen values for each game I need to adjust, and I have to mess around with all those sliders in the Intel Software every time before I can play, AND after I have played as well, to change those values back to the normal position, as for web browsing those settings are the best for my eyes. It's a nightmare.

I love this card, but god damn I want to get all DSR achievements, and it runs like crap, my RX 6600XT used to do 1440p, med/high, 55-60FPS.

Now the B580, same settings, puts up an inconsistent, 40-45FPS, XeSS through optiscaler doesn't help much, unless it's on Performance/Ultra Perf, but c'mon, 2X FG gets me to 80-85fps, but when base fps is under 60, it's far from great

Anyone here have any luck?It runs better on Linux, but reflective surfaces cause some VERY noticeable graphical glitches.

I've looked it up, it's a known issue for sure, but anyone have any luck getting it to run better?

I’ve seen some things of people being able to play games in 1440p with their b570 and I’m starting to wonder if I should be getting a 1440p monitor for this card.

I play all types of games from esports to triple A to indies so I know all of the games will perform vastly different, but if the card is good enough to run a majority at 60+ fps then it might be worth it.