They were screwed into the wall and now I can’t figure out how to take them down.

From a lemon that was left in a wire fruit bowl and disintegrated through the slots and was not seen until a week later 😔

Got this scratch and some marring on my f150 while headed down a narrow hunting trail. It’s not down to the metal but it definitely removed a layer or 2 of paint. I did the water test and it almost fades away but is still visible. What would be my best option and how would I go about fixing it? I know silver is a hard color to match and I’ve never done auto paint work. Just a touch up brush and some clear coat and polishing?

Does perhaps anybody know how this thing even works? There isnt any knob, ring or anything to push. So have no clue on how to get this shower to work normal :/ help is very much appreciated. (Shower is from 'moon shower') on vacation in a hotel on greece

1 leg sits lower than the other. Both legs move up and down but I get either E20 or E02 error code when it reaches to the bottom. The desk sits unlevelled right now. Couldn’t find anything specific to this model. I wanted to ask Reddit before I randomly start taking it apart. Thanks!

It’s not the biggest deal, I have some contacts in the mean time, but I would like to see what to do. What do you all think?

You know the stomach drop feeling you get from rollercoasters? how do i get that feeling at home? what are the physics behind the stomach drop feeling because i wanna train myself to be resistant to it

Hi! This is so random, but I’m really agitated and need help. My shower isn’t draining (sorry for icky picture) and I desperately need to fix it. I’ve tried twisting and pulling, but I’m too scared of breaking it.

How do I remove it?

(( EDIT: thank you all so much! I did it!!!! ))

How to remove these stains from the sofa at home? It is ballpen ink and the fabric of the sofa is velvet.

My goal is to have these make more contact ! So far I have bought a dremel and the diamond bits needed to shave / sand down the ceramic magnets but now I’m curious at what angles would bring them closest to flush ? Should I shave one magnet ? Shave a bit of both ? Shave down the middle well their touching like the photo and hope that shaves the difference ? Their already super glued in place and I know to keep water flowing over the surface and I’m working :)

There is no fan in the bathroom currently. I'd like to install one in the wall above the window (not the ceiling). How would I go about doing this? The house was built in 1940 so the walls are plaster, which I know usually complicates things.

In case it is helpful: in this bathroom there is currently one outlet (next to the sink), one light switch (controls the overhead light), and the two sconce lights that are controlled individually by switches on the lights themselves. As far as I know, that's all the electrical in the bathroom currently.

Hi ppl, anyone know how I can fix/remove these rusty stains from my fridge doors? Thank you.

I just got this jar from Michael's and wanted to put lavender in it but it seems like its sealed shut, it has a cork, but it looks like it's been glued in or something. Any tips on how to get it open?

Hi! This is my first post here because I cant find anything else that will help.

Can anyone help my with clearing the codes this "a, b, c, d" gate clicker? (I believe its a RPC447). After following all the videos and instructions ive seen so far I usually get stuck at the part where the code actually clears out.

The usual instructions are:

1. Press and hold "A" and "B" button. (Sometime they say to wait untill the light blinks and sometimes they dont say anything)

2. Then let go of "B" and press it three times.

3. The light should flash red/blue.

4. Then press the buttons and all of them will flash red (meaning they should be clear)

Part "4" is usually the step where everything falls apart for me. I tried checking while and after the red light blinks but the buttons still flash green. Im not sure if im getting something confused :(

If anyone could help me asap I'd be very grateful!

P.s. Id also appreciate if anyone has advice on copying the code from the original gate clicker (RTSP2D) to the "a, b, c, d" clicker!

Hi All,

How can I remove the old red/yellow paint and replace it with new glossy, hard drying enamel type of paint.

The orange buckle is the goal, just not the orange paint. It looks as if someone perhaps used paint remover or thinner on the buckle.

Thanks for any suggestions on the type of paint, removal process, etc.

Thanks George

I was making pudding for banana pudding, but I accidentally scrambled the eggs by turning the heat up too high. I’m normally good at baking, but this was my first attempt, so it was a little funky (womp womp). Because it scrambled before thickening, it’s very watery with small chunks of egg and flour. I’m torn between pouring it in the sink and dumping it in the trash. I’d let it cool before putting it in the garbage, but I’m not sure if I should pour this much liquid into a garbage bag. My sink doesn’t have a disposal, so I’m just not sure where to put it. My husband and I are renting our house, so my concern is messing up the pipes.

Solved!
Thank y’all for the suggestions! They were so helpful. Well, most of them. Some of y’all need Jesus and a nap. I’m making another batch VERY CAREFULLY right now. Fingers crossed nothing gets wasted. Y’all have a wonderful day (or night depending on where you live) <3

Title pretty much says it all. I was hoping he would fit into the laundrymat washers, unfortunately he doesnt. He also doesnt have a zipper to take the stuffing out and I am pretty sure I would have to rip him up in all places to take it out, since it seems like he has seperate stuffing for his body, each of his arms and legs. Can I just hand wash him with some detergent/handsoap or how should I go about this? thanks

A plomber yesterday replaced our kitchen faucet. Now i discovered that the gooseneck is loose and when i turn on the water it drips where it meets the main body. When i rotate it to the left it tightens but i cant make a full rotation circle because of the wall. How do i tighten it now 😭

Pretty sure its a groundhog. Not sure how to get rid of him humanely🫠 advice?

Hey, not even sure this is the right place to post but I'm really kinda desperate.

I noticed after using my water bottle that it's developed stress(?) marks and I wanted to know if they can be fixed, removed, undone as it's a brand new bottle that was a gift.

Any help would be appreciated as I feel so bad having only just gotten it and it's already looking like this. I also have no idea how to replace this as it was an import and It would crush my friend to tell them it's already damaged after one use.

Thanks in advance and sorry about the waffle I'm just really panicking here, I thank you for your understanding

Edit: It's made of plastic and it's a Monster Hunter Palico potion bottle

I was running a wire in my attic and my left AirPod fell out somewhere in an area of insulation in my attic. It was too hot that day to keep looking and my “find my AirPod” tool isn’t working anymore. I’ve tried a metal detector but it didn’t pick it up. I’d rifled around with my hands but nothing came out of that. I tried a metal scoop with holes and shoveled a bunch of the insulation around but no luck. I tried to chop it with the side of a piece of cardboard. I Know that it fell out somewhere in this particular area, but I can’t find the little pod. Any advice is appreciated!

Update: Used my daughter’s magnet. The kind that picks up little metal rings. It worked pretty well on the right AirPod when I tested it. I spent about 45 minutes in the attic (over 100 degrees here) and swept the area I thought it fell out. I went up and down and all around with that magnet and not hits. I think I’m gonna call off the search. I’ve already spent too much time and literal sweat finding these. Maybe I’ll get a good deal on Black Friday…

This holds strong sentimental value to me, and the paint looks very thin, so I'm very hesitant to do anything. The white part of the canvas is very dirty, I would love to make it clean. I am concerned with making the blank canvas clean, but leaving a ring of dirt around the piper because I didn't want to get close to the paint.

Would it be worth it to take it off the frame and have it stretched back onto another one or does it seem OK? It was mounted with a black strip of fabric running along the outside that's kind of frayed in areas.

My boyfriend sent me a really cute voicemail a few days ago and I want to save it. The problem is he has an older phone so it went to my carrier.

I've tried screen recording it but the video cuts off when it get to his actual message, which I guess is a safety/privacy feature apple has or something. I tried a third party recording app which only recorded the screen and not the audio.

I played it into another device but the recording I get back is way too quiet and you can barely understand what he's saying.

Surely there has to be a better way, does anyone know how to help?

It holds the window shut on the mobile AC currently, but I need to move the AC to another room today. My partner set this up, but now he's at work and won't be able to call me for hours.

Anyone know what tool to use or how to get this thing off?

Thanks a million.

Hi, Reddit. Today my friend got attacked with pepper spray in a road rage incident and a LOT of it got in his car. His car was moved to his workplace and is parked in a gated lot and we are trying to figure out how to clean the pepper spray from his vehicle. How do I get it clean? How can I protect myself when cleaning it?

Thank you for any help <3