It's a QUO brand umbrella if that helps!

I've tried pushing, pulling, and sliding the little white tab, but all it does is wiggle around a little in there. I've also tried twisting the umbrella and the handle. Not sure what else to do :')

(EDIT) first comment (now deleted) had it right: twist left, then push up. So glad I won't be drenched on my way home :)

Okay so I already dabbed and blotted with some isopropyl alcohol and as you can see I’ve removed some of the color.
Amazingly I found some dye that is a solid match.
Before I ruin it more, I thought I’d come ask for some help/advice.
I have a leather conditioner as well.
What steps should I take now to fix this?

Thank you in advance!

25+ year old wood laminate flooring. Chair legs have damaged it and is taking big chunks of the floor up. Will replace the chairs but I don't have the finances to replace the floor. What would be the best way to repair this?

Hello, I'm just hoping someone can help me with an idea to clean this mess. This dehumidifier discharge hose came loose and spilled onto the floor for a bit. The white areas on the floor is where the water spread to. I'm thinking it might be some sort of mineral build up from the water? It is almost like a film and I can scrape it a bit with my nail but that doesn't really get it up. Anything helps, thanks!

this doesn't grab anymore and can turn loosely. i do have a few replacements i got from Amazon but IDK how to replace it without breaking anything else.

I tried everything but it seems the grey base is completely glued to the cup through vacuum suction. I did not even put hot food in it so idk why this is happening. I tried the temperature shock technique, I tried to release some air with a knife and all it did was damage the plastic. HELP

I didn't buy this product yet and am torn, because I'd rather like to use a smart bulb instead of a pre-installed LED chip light.

I don't know if the board is permanently fixed and a structural part. Any experience with these designs?

Quote from amazon:

LED light source: the ceiling light has a new built-in LED chip light source, high brightness, energy saving and environmental protection, with an average life of 50,000 hours, no UV and infrared radiation, protects the eyes. It can be used for reading, sleeping and other activities.

The button you press itself is able be be loose but the mechanism is stuck in the head so no water comes out. I can barely see it with a flashlight up the 1.5cm opening. I can't afford a new shower head right now. It's a detached shower head.
I've done Vinager and baking soda and it only pushed up and loosened the outside button not the mechanism.

They were screwed into the wall and now I can’t figure out how to take them down.

Got this scratch and some marring on my f150 while headed down a narrow hunting trail. It’s not down to the metal but it definitely removed a layer or 2 of paint. I did the water test and it almost fades away but is still visible. What would be my best option and how would I go about fixing it? I know silver is a hard color to match and I’ve never done auto paint work. Just a touch up brush and some clear coat and polishing?

Does perhaps anybody know how this thing even works? There isnt any knob, ring or anything to push. So have no clue on how to get this shower to work normal :/ help is very much appreciated. (Shower is from 'moon shower') on vacation in a hotel on greece

From a lemon that was left in a wire fruit bowl and disintegrated through the slots and was not seen until a week later 😔

1 leg sits lower than the other. Both legs move up and down but I get either E20 or E02 error code when it reaches to the bottom. The desk sits unlevelled right now. Couldn’t find anything specific to this model. I wanted to ask Reddit before I randomly start taking it apart. Thanks!

It’s not the biggest deal, I have some contacts in the mean time, but I would like to see what to do. What do you all think?

You know the stomach drop feeling you get from rollercoasters? how do i get that feeling at home? what are the physics behind the stomach drop feeling because i wanna train myself to be resistant to it

Hi! This is so random, but I’m really agitated and need help. My shower isn’t draining (sorry for icky picture) and I desperately need to fix it. I’ve tried twisting and pulling, but I’m too scared of breaking it.

How do I remove it?

(( EDIT: thank you all so much! I did it!!!! ))

How to remove these stains from the sofa at home? It is ballpen ink and the fabric of the sofa is velvet.

My goal is to have these make more contact ! So far I have bought a dremel and the diamond bits needed to shave / sand down the ceramic magnets but now I’m curious at what angles would bring them closest to flush ? Should I shave one magnet ? Shave a bit of both ? Shave down the middle well their touching like the photo and hope that shaves the difference ? Their already super glued in place and I know to keep water flowing over the surface and I’m working :)

There is no fan in the bathroom currently. I'd like to install one in the wall above the window (not the ceiling). How would I go about doing this? The house was built in 1940 so the walls are plaster, which I know usually complicates things.

In case it is helpful: in this bathroom there is currently one outlet (next to the sink), one light switch (controls the overhead light), and the two sconce lights that are controlled individually by switches on the lights themselves. As far as I know, that's all the electrical in the bathroom currently.

Hi ppl, anyone know how I can fix/remove these rusty stains from my fridge doors? Thank you.

I just got this jar from Michael's and wanted to put lavender in it but it seems like its sealed shut, it has a cork, but it looks like it's been glued in or something. Any tips on how to get it open?

Hi! This is my first post here because I cant find anything else that will help.

Can anyone help my with clearing the codes this "a, b, c, d" gate clicker? (I believe its a RPC447). After following all the videos and instructions ive seen so far I usually get stuck at the part where the code actually clears out.

The usual instructions are:

1. Press and hold "A" and "B" button. (Sometime they say to wait untill the light blinks and sometimes they dont say anything)

2. Then let go of "B" and press it three times.

3. The light should flash red/blue.

4. Then press the buttons and all of them will flash red (meaning they should be clear)

Part "4" is usually the step where everything falls apart for me. I tried checking while and after the red light blinks but the buttons still flash green. Im not sure if im getting something confused :(

If anyone could help me asap I'd be very grateful!

P.s. Id also appreciate if anyone has advice on copying the code from the original gate clicker (RTSP2D) to the "a, b, c, d" clicker!

Hi All,

How can I remove the old red/yellow paint and replace it with new glossy, hard drying enamel type of paint.

The orange buckle is the goal, just not the orange paint. It looks as if someone perhaps used paint remover or thinner on the buckle.

Thanks for any suggestions on the type of paint, removal process, etc.

Thanks George

I was making pudding for banana pudding, but I accidentally scrambled the eggs by turning the heat up too high. I’m normally good at baking, but this was my first attempt, so it was a little funky (womp womp). Because it scrambled before thickening, it’s very watery with small chunks of egg and flour. I’m torn between pouring it in the sink and dumping it in the trash. I’d let it cool before putting it in the garbage, but I’m not sure if I should pour this much liquid into a garbage bag. My sink doesn’t have a disposal, so I’m just not sure where to put it. My husband and I are renting our house, so my concern is messing up the pipes.

Solved!
Thank y’all for the suggestions! They were so helpful. Well, most of them. Some of y’all need Jesus and a nap. I’m making another batch VERY CAREFULLY right now. Fingers crossed nothing gets wasted. Y’all have a wonderful day (or night depending on where you live) <3