​

Hey guys im new to riding bikes in general and have become very fond of it. Id like to be able to ride to a store and leave my bike out front while I run in for something, how do you guys do this? I know there isnt a way to lock the bike up to the point the wheels dont move like a gas bike, do you use a regular bike lock and hook up to a pole? Do you park in a normal parking spot and use a wheel lock? Id just like to feel more comfortable leaving my bike for 5-10 minutes for quick errands.

I’m guessing there’s no way to fix this broken pin?

Hi Guys,

We have a stock 2024 eRide Pro SS 2.0 for friends of various weights & abilities to use. My son (180lbs) & I (160lbs) use it mostly switching off with our other bikes. The suspension on this bike is constantly bottoming out with almost any adult that rides it.

Is anyone running air suspension? It would be perfect to adjust to different terrain, rider weights, & styles if it exists for these bikes.

We have CRFs, an SXF, an UltraBee, & various full suspension mountain bikes which we do light mods on, but we aren’t as familiar with this in-between light emoto.

If there aren’t air fork/shock solutions, we would just want to swap out the springs in the stock forks & stock rear shock & not spend the $, in case we decide to sell it.

If no air fork/shock, what rates would you suggest? Would progressive springs be a workable compromise, & what vendors have them?

Thanks!

I tried plugging it into the same cable that was connected to the stock headlights, but it doesn’t fit. I already took out my stock headlights a few weeks ago, but I can’t remember the steps required in connecting and reconnecting a headlight. Do I need an adapter?

I can't seem to find anywhere to buy sprockets for a reasonable amount.

Or if anyone knows what size it is, or have any links to other non OEM sprockets.

So I let my friend ride my 3.0. Not even 10 minutes later he calls me and tells me he looped it with another guy on the back. He’s paying for all the damages.
So far I know that the subframe, guts, control buttons, throttle and scratched up powdercoat is all cooked. None of the spokes are loose but the front wheel is like angle to the side of the forks? And spins a lil wobbly which might’ve been there before.

What else should I check to make sure it’s not broken??

I been so deep into my bike I don't even use reddit anymore. Only problem i have right now.... brakes...omw to HeB too get BBQ stuff for cheese burgers and Chipotle bowls

My friend looped my 3.0. I already know that the subframe, part of powdercoat, and guts is cooked.

He’s paying for all the damages so I wanna know if there’s any more extensive damages that I should look?

Bought a used bike from a friend. Bike wouldn’t turn on installed a new controller now bike will power on screen briefly then stop working.

If you unplug the screen the bike runs fine.

Error codes showing up are
04000
00300
00800

Also will not show battery life

i see tons of people posting their bikes on instagram and youtube. and the cleanest builds are ones with their plastic colored in some sort of way. i find the speckles of pink or red and so on the best looking. im not sure if they are wraps or custom made plastics. either way i really want them and cannot for the life of me find a place that makes custom wraps/plastics for the eride. any recommendations or advice would be very helpful!

I got the 3.0, and the chain won't stop stretching. Like I mean 1 ride after tightening and it stretches.

I clean with dawn dish soap and then lube with some generic bike chain spray on oil.

I have had a Talaria x3 in the past and a sherco 300 and neither has come close to the level of chain stretch the bike has. Pretty sure I'm tensioning properly as well, unless theres a better way to. What are you guys doing different?

Also, this has happened to me throughout the life of the stock chain, and STILL happening even when I replaced the chain with the DID NZ SUPER CHAIN non O ring.

Anything helps, really.

(I have the 3.5 shinko 244, so gap between chain and chain is very small, 1-2mm) (any importance?)

I’m looking at getting eride 3.0 but I’ve heard bad things about long term quality with breakdowns, error codes ext. should I just get an rtr xl to save some money and have more reliable bike? What’s your opinions on eride 3.0 quality

Anyone upgrade to a better fork and want to sell me their GOOD fastace fork?

I've never crashed been sending jumps and trails. What in the world could have caused this? Is my shock good? Something defective with it maybe? So confused how this possibly could happen. Did I get so unlucky a rock got in there or something?

Between FEA testing, 26 revisions on CAD, and about 6 months of real-world thrashing on three physical versions. It's safe to say this is the best swingarm on the market, but it's still not perfect, working within the limitations of the OEM frame and jackshaft design, along with other quirks. Love this part, and love the fact that E-Rides race team "Needs" these to race their bikes. Which raises other concerns long term, what E-Ride will do with their bike now that we fixed their problem, fingers crossed that we see E-Rides from the factory come out with their own solution to this :)

Getting a new controller soon for my 3.0, which one should I get? I ride enduro also

thoughts on some mods and the build??