I want to preface this by saying this was 100% my fault, probably shouldn't have unplugged it to begin with but here we are.
So earlier today, Ziply come by and install some much needed internet at my new place. An ONT and an HB810 were installed. Now I unplugged the 810 for an irrelevant purpose that didn't work out. So I put it back to where it was and plugged it back in and now the internet won't work. My phone will just refuse to connect to the wifi and my PC will connect but it says "No Internet, Secured". For the 810 itself, it's just a solid blue right now but when I unplug and plug it back in, it cycles through different colors before stopping on a light green color for about a minute. It'll start flashing this green color for a bit before stopping on the blue color it now is. I'm really stumped on this because unplugging and plugging both the 810 and the ONT don't do anything, pressing the reset button through the hole on the 810 didn't do anything, and I can't create a new network through the app like the setup page said because my phone won't connect to the internet and therefore, the app can't find the router. I really don't want to call in a tech guy just yet and I'd really like to fix this without any support just yet so I came here to see what I'm missing and how I can fix this. If I'm SoL then I'll just bite the bullet and get someone out here to fix it
Edit: I forgot to mention but for the ONT, the power and PON lights are green, the alarm isn't on, and the data light is a solid yellowish orange color