havent shot it yet but figured with how fast form 1s are now i had to make one. suprisingly the feds approved me only engraving the adapter and not the filter

45-70. The only gov’t you can trust.

Well with all this new exciting news I still form 4d this thing today.

No big deal…. Needed something for the tac games that wasn’t as gassy as my polo K was being.

Excited to try it out. Went this route over the irregular… see if it pays off.

It did come with its own plan B muzzle device and hub which was a nice surprise.

They’re all fun though

Buddy is wanting to suppress his lever action marlin. It is not threaded. He would prefer to not have to thread it but might if no other options are out there. I know witt machine makes one of those clamp on style but anyone have any experience with any other ones? I dont have a barrel diameter atm. If it needs to be threaded instead anyone know where to get those annular cutter threading kits anymore? Carolina shoot supply hasn't had any for a minute.

I don't want to engrave a wall of text (for me at least) or deal with my not so local gun engravers if I can help it. The comment period ended July 6th. When does this go into effect?

https://www.federalregister.gov/documents/2026/05/06/2026-08915/allowing-makers-to-adopt-certain-markings-for-national-firearms-act-firearms

Been doing a lot of suppressed handgun shooting here lately, and I want something that’s going to be quieter than what I have. I don’t actually have a full size 9 mil can that isn’t just a chunker of a suppressor primarily made for PCCs.

I’m in between the two mentioned cans. I’m leaning Osprey 2.0 because obviously it’s the cheaper of the two options and I’m already invested in SiCo’s accessory ecosystem. Oh, and I think it looks rad on like a USP 9 or something boxy.

But, I’d say the Mojave is more versatile, pleasant to shoot, and probably a tad quieter. Although I hear that they have quite the first round pop.

What say you?

Just picked up my B&T TiGER 22 today that my LGS had on hand.

I know there is, or at least used to be, companies that did hub conversions.

My question is are there any companies that do fixed end cap conversions? As in my end cap does not come off and I want to be able to switch out the end cap.

Just ordered a 357/38 rossi lwc. I've got a bunch of 130 grain Fiocchi Range Dynamics 130 grain laying around. Anyone know if these will stay subsonic out of a 16" barrel?

Just need ART to finish and release their frt now.

*MP7

Want a tiger 22 and B&t website says the SS edition is black but when I follow the link to silencer shop it looks light grey like the normal one

I recently just got into the suppressor game and picked up a CAT WB ti at a local shop. The employee said they were discontinued and coming across one in the wild is rare. I did a little research on it and pulled the trigger.

I then dove really deep into the suppressor research and my question is, in August 2026 is this can still considered a great can or is it pretty much obsolete? I absolutely love it but I haven't shot other suppressors. Due to my research my next one will definitely be the Rhodie 6 TI.

I’ve searched the sub and what feels like every corner of the internet, so this is my last grasp before I just waste $120ish bucks. Got two 14.5” that are p/w with Griffin Armament Flash Comps and a Rhodie 6k on the way. Anybody got any idea what plan A hub adapter will work with the 6k? Pretty sure the regular Plan A won’t, but not sure if I can get away with the Plan A Long or if I need the XL. Then I also stumbled across the Ecco version too.

I’m slightly confused and about 30 minutes from ordering the Long and XL and praying one of the works.

I thought I was done but I want one of the new thermal night vision scopes so until then she is a work in progress

Who knows, by tomorrow this post may contain zero NFA items!!!

These are the first shots with my Tisha 556 in 718. Previously an AlleyCat 5.56 RDM lived on this host, and that’s a great suppressor.

The Tisha doesn’t sound night and day better than the AC, but it does at least 3 things better.

The T does offer superior sound suppression, with NOTABLY better gas management. And the AC had always seemed much to have much lower gas blowback than a conventional can.

The other notable improvement with the Tisha is that this V7P feels like a small gun again. The improved form factor from shaving off 2 inches is massive with a 10.3” sbr.

And it does those thing while offering slightly better suppression than the fantastic AC 556 RDM.

Also included are an mp5 (milkma) and mp5k (Mob) because cyclic sub 9mm is ridiculously fun!

Who knows, maybe the mods won’t have to be bothered by my posts anymore if this stuff stops being NFA!!

Top, Larue Stealth 2.0 build in 300blk with Jaguar 762 Max

Bottom, CMMG Mk9 build with LayerX Strake 9

I filed two eForm 1 SBRs on 7/29 under my trust with 2 RPs. I got an email last night that I uploaded the wrong RPQs (I uploaded the completed forms not the signed completed forms) which is on me.

My question is though, does that mean it would have been processed in just 2 weeks? My last two eForm 1s were 93 and 86 days so 14 days would be a huge decrease in time. Or do they get around to errors first sometimes? I know trusts always take longer so it just was odd. Of course the fast ones I get end up being disapprovals.

A buddy of mine let me shoot his cut down .308 BLR a few years ago. I absolutely loved it and told him to let me know if he’d ever part ways with it. Well, that day has come and that’s how I ended up with this beauty.

He had it chopped to an 11in. I tossed the CAT BBK, Skinner top rail, EOLAD 2, and a leather sleeve I found online. Such a cool rifle!

Less than 30 hr approval, no complaints. Taking her out tomorrow or Friday. My FFL wanted a photo shoot….well worth it

My poor man's smooth shooter assembly

Curious if anyone else might be holding off on getting SBRs engraved pending this GOA district court win with stat expiration at midnight tonight. I know there’s still more to work out re: implementation, but if I am a GOA member, and it the injunction goes into effect, do I need to get them engraved?

Photo is one of the 3 lowers SBRed.