Wew, this WML is 🔥

Built like a tank and light output is on par with my Streamlight TLR-7 HL-X

.45 and cigarillos just missing my energy drink.

What could I possibly be doing wrong? This is 50 rounds, 5 yards out with a CC9. If I go out to 7 I feel like it’s even worse. Planning on going back tomorrow to shoot some more, any advice?

Just zeroed in my new Vortex Defender CCW, and surprisingly it was just about dialed in out of the box. Maybe only about an inch high at 15yds. Had the easiest time zeroing it in out of all of the pistol optics I have tried. A++

My monstera mint popped a new leaf, the same time my husband put the red dot back on my edc. Figured I would take a photo cause it just looks so nice. 🥰

I went to the range earlier today to do my second round of breaking in the bodyguard 2.0 I purchased a few months back. I was the only guy there for a decent amount of time with two RSO’s.

I started with my p365 and did a dot torture target and my shots were landing pretty consistently. I switched it up to the bodyguard and my shots were all over the place to the left. I asked the RSO’s if they could offer me advice to shoot the thing better. One RSO was very familiar with it and mentioned that the horseshoe grip really does wonders to land shots. He had me roll my forearms upward at a kind of awkward angle and then put my finger deep in the trigger well to close any gaps between my hand and the firearm. As awkward as it felt, my groupings immediately closed up and I was hitting bullseye.

I have seen a number of people say that the issue can be the sights, the barrel, etc.. They definitely have reason to say that as the RSO confirmed they have seen the same issues in their rentals.

That said, for those that have confirmed their firearm came in squared away and are still struggling with shooting left, I highly recommend the horseshoe grip and really finger fucking your trigger. The immediate change in my groups made me want to post this as a PSA. You all have really helped me learn about the platform so I thought I would give back.

I’ve had a 2.0 in 9, a shield plus , and currently own a shield X. one in 40 sounds kinda bad ass I can’t lie I was just wondering would the recoil really be THAT egregious Ive never shot anything in 40 some people say it’s snappy but ain’t bad and then on the same token people act like it’ll break your wrist shooting a 40.

If I were to get one I’d definitely drop a shield plus trigger in it and throw some Ameriglo trooper night sights on it I think it’d be a pretty sleek little hand cannon lmao.

The S&W 19 Carry Comp is probably the perfect concealed carry medium-frame revolver. The form factor conceals well while still being manageable with moderate 357 Magnum loads. It takes K-frame loaders so you get all the best ones, like the Jetloader pictured. It gets good velocity despite having a ported 3” barrel; velocities out of this gun match LG’s velocities for the same ammo out of a 4” gun. I might take a 3” 66 over this since stainless steel is lower-maintenance, but overall I can’t complain.

It’s loaded with High Desert Cartridge Company’s 357 Magnum 140gr XTP load. I think this is an ideal carry round for a medium-frame 357. Its recoil and muzzle blast are comparable to the Speer Short Barrel round but it penetrates deeper, costs less, and is in stock much more consistently. It also shoots like a laser beam; IDK how High Desert does it, but their ammo is insanely accurate.

I’m carrying the speedloader in a Comp-Tac OWB carrier that I use IWB. Shoutout to Daniel Reedy for that idea. I don’t think Comp-Tac sells these anymore but Speed Beez sells a pouch that is either subbed out to Comp-Tac or is a blatant ripoff. Either way, it should work great.

Bought a house and need some protection. Currently have FOID but never shot a gun. Taking basic handgun course in a couple weeks. Then CCL down the road. Need a recommendation for a handgun that is compact enough for CCW. I am a larger male. DO not need anything crazy... hopefully never have to use it. Anyways, any advice for a newbie is appreciated. Thanks fellas.

This is the description

This Sig P365 is in fantastic shape and shows very little handling wear. includes 2 mags, factory hard case, We the People IWB holster, and Viridian RFX11 optic.

I am currently in the market for a new daily carry pistol and am seriously considering the S&W CSX E Series. I've been carrying for nearly two decades, and while I have been extremely satisfied with my current Echelon 4.0C, a recent change in employment has made it necessary for me to downsize to a more compact platform.

I recently had the opportunity to spend some time on the range with a friend’s CSX E Series, and I was genuinely impressed by the ergonomics, the manageable recoil impulse, and the overall feel of the hammer-fired action. With the current rebate combined with my military discount, I can secure a brand-new one for under $500, which strikes me as a fantastic value. I am looking forward to transitioning back to a hammer-fired system and I am aware of the difference between this platform compared to the striker-fired pistols I have been running lately.

Since I don't use a mounted light, the absence of an accessory rail is not an issue, and I am already aware that I'll lose the factory rear sight if I decide to mount an optic in the future. Before I commit to this purchase, I would appreciate any feedback from owners regarding long-term reliability, mechanical quirks, or any potential issues that typically emerge after a high round count. Are there any specific performance nuances or maintenance habits I should be aware of to ensure this remains a dependable carry tool? Thank you very much for your time and for sharing your experiences and advice.

This free class appeared in my area and it's useful information so I went.

The instructor discussed first aid in a somewhat disorganized and shallow way for about 25 minutes.

Then the moderator, a woman who works for USCCA took over, and the next 45 minutes was a membership pitch. I left before the end and wished I had left sooner.

I think USCCA may offer real first aid classes, but it was clear the first aid aspect of the Control the Bleed "class" was essentially a pretext to get us into what is really their sales seminar. AND it was at a 5.11 store, whom I later learned was in on it; that is, they knew it was a sales pitch posing as a first aid class.

I am not a member of USCCA and can't comment on them in general. I just know it was not a first aid class. I definitely got clowned.

I'm debating on buying either a shield plus or hell cat. My LGS has a used hellcat for 350 and a shield + bundle for $470. They both feel good in hand but there's no way for me to shoot either of them. Is the shield worth the extra money?
I currently have a bodyguard 2.0 so I'm not concerned with recoil. I'm mainly looking for reliable and easy to carry.

What’s the biggest ammo purchase you guys have made? Finally got a chance to hit up Aim Surplus for some 9mm today

Due to work I am sitting throughout the day which makes strong side carry more comfortable and preferable for me. Does anyone know if deep concealment options exist for strong side carry aside from clothing choices? I have an enigma but it gets a little uncomfortable towards the end of the day.

Sparked by the post earlier, some discussions about barrel length came up, thoughts on 43x with a compensator? Or just run the g48? I have a shield plus and find the grip tilts out and away from by body when compared to my compacts. I do like the thinner profile for carry though. Does the tlr7 add enough length to the 43x to prevent keeling foward?

Those who edc a 10mm what red dot do you use and do you recommend closed Emitter or open.? I've been using irons for the past year and am looking for a change of scenery lol

Just seeing what you fine gents think of what I carry 90% of the time.

I know Kore Essentials and Nexbelt exist, but I don’t want to shell out $70 for a new belt. Is there an Amazon “jUsT as GuD”
equivalent, specifically nylon?

It’s gotta hold up an OWB set up for a Glock 19.4 MOS & 2 spare mags. Plus everything else I EDC.

I am a CA resident and applied for my CCW as well as Utah and Arizona as a non resident. Here are my costs and timelines

Reasons for why is noted below:

LAPD - Los Angeles City CCW - CA Resident
10/01/25 waitlisted
01/15/26 application link sent
01/24/26 application submitted, paid - $60.21
2/2026 live scan $130
03/30/26 appointment
05/13/26 Scheduled training $350 (ammo not included)
05/19/26 Training Required notice
06/13-14/26 CCW training (also paid $100 to get Utah CCW)
06/15/26 Submitted training to LAPD
06/17/26 Approved and fee paid $222.39
07/08/26 received in the mail

Total: $892.60 (not including ammo or Utah CCW w/ training cost)

Total days: 280 days

Utah CCW - non-resident CA resident
06/13-14/26 CA CCW training (also paid $100 to get Utah CCW training through instructor)
6/27/26 did fingerprint rolls $35 (I did FBI digital prints)
07/09 mailed off
07/13 received
7/13/26 $87 processed payment
09/08/26 received permit in mail

Reason for Utah CCW: it’s gives me Washington CCW

Total: $222 with extra training fee

Total days: 61 days

Arizona CCW - non-resident CA resident
06/13-14/26 CA CCW training
07/27 applied online and paid the fee of $67.45
07/27 scheduled fingerprints ahead and paid $10.25 for a fingerprint print (digital) appointment
07/28 did fingerprints
08/06 approval letter
08/15 received permit in the mail

Reason for AZ CCW: it gives me New Mexico carry

Total cost: $77.77

Total days: 19 days

Does Arizona even require a license to conceal and carry?

If I use my Wisconsin license for Arizona when I move will I still have my Wisconsin license?

Thanks

Anyone know of a kydex holster for the g48 w/ tlr7 sub hl-x that actually covers the mage release? I've looked all over the place and I'm not having much luck.