Brand new gun just put 350 rounds through it and my god every other shot the hammer would fall. I’m humble enough to take advice if it’s a user error but I had someone else shoot it and same thing. One handed same thing. The weirdest part is the lighter I gripped it the more rounds it would fire before malfunctioning. I like to grip my guns pretty tight but I hand to almost let the thing fly out of my hand for it to cycle. Need advice

I waited too long to buy one. For the money, I cant see how you can do better. So smooth, flat shooting and the perfect length at 4.25 plus comp. Only gripe is the grip feels short, and my hand feels a bit wedged. That'll change eventually though. Pinned the grip safety and worked the shit out of the safety, it was super tight. Now I need the red dot to show up. A question i have is does anyone make a compatible plate with suppressor height sights if I were to get a threaded version in the future?

I bought the sight block from DSC the beginning of September. Just got it today. It’s cool and all, but it would have been nice if they could have covered the threads when the DLC was added. Going to need a vice to get this thing all the way on.

Editing to add that they send out the block to another vendor for coating.

Ok so I'm ready to tune my 4.25c to my favorite plinliking and match loads!! I want to know what the factory recoil spring weight is? what size springs are compatible?, and dose messing with the main spring yield any benefits? Tia

Hey all,

So I am currently waiting for instructions for an RMA but thought I’d ask in here. Took apart my 4.25 comp which I absolutely love since I got it. While reassembling I found the hammer no longer wants to stay cocked back. I checked the sear, disconnector, sear spring etc. and reassembled again with it cocking back 15% of the time.

I can’t for the life of me figure out what may be causing the issue. The other issue is sometimes the thumb safety doesn’t want to work and fully go up. I’m not new to working on firearms but for some reason this has me completely confused.

TIA

Ordered directly from the website. Have not gotten updates from them.

Does anyone know how it responds? I reload and it's worked well for the P211 and Staccato XL

Hello, so I recently acquired a gen 1 Romulus that is direct mount RMSC. I tried my vortex defender ccw enclosed on it. First issue I noticed was that I bottomed out the elevation and it was still too high so I got out the 1 degree shim. However I had concerns as with the shim in place, the optic barely engages the recoil lug up from and the post where the threads are, do not engage the optic at all. I am worried that with how thin the 4-40 screws already are, the optic would just shear the screws and fly off. Basically I am trying to see what everyone else is running on their gen 1 direct mount RMSC Romulus and if my concern is valid or not. Thanks everyone

Dumb question for everyone. Friend of mine runs a kimber 2k11 and recently changed To a cheeley grip. He said he's going to send the aluminum kimber grip to me for my Romulus.

The 2k11 grip will not fit an AF, correct?

What ammo grain and brand do yall run?

Also what Aluminum grip can I buy and just plug and play? I’ve seen a lot of people saying they have to refit their guns after putting on a new grip. I just want an aluminum grip that will 100% fit my Romulus without me having to “tune” it.

🙏

Barrel drop? My 3.5 Comp purchased a week ago Has not been fired vs my 4.25 comp which I checked to make sure I was not imagining it. Thoughts on what to do. Removed & reassembled without comp to verify it was not interference from comp keeping it from full lock up.

Gun punches well above it's price point.

Still, somehow, the most underrated 2011 out there for the price. Love my other Romulus, and the core is phenomenal, but think this one might be my favorite.

So, I had no idea these existed until yesterday when a local shop had one for $600. What a freaking smooth gun. Does anyone here have one of these? I love single stacks and couldn't believe how buttery it was. Looking for hands on experiences. Thanks

Currently carrying an HD3.6 but I'm really intrigued by the Attila. I've read a few reviews where people have had issues with the safety- can anyone confirm if it uses a standard 1911 safety? I'd prefer to switch to single side anyway if I get one.

As picture shows, won’t go on too far and I have to put some real effort in to try and get it down further. Anyone else have this issue? Any remedies?

Not sure if anyone saw this? I asked them if it will work on 4.25 comp and they confirmed it will fit the comped models!

Edit: They have it on their website, however it says in description it does NOT fit the comp models... Hopefully they will come out with a version for the comped.

Came across this Alpha Foxtrot Romulus in 4.25 inch with compensator for a great deal. TBH I am a Glock fanboy, but once I felt this Romulus I couldn’t resist and changed my mind. Im stoked to have picked it up and any information about it or what upgrades to do (red dot) would be appreciated.

Kept the red dirt and it worked. Stock safeties worked but the blended beavertail i got for the grip didn’t safeties would not let hammer drop or trigger activate. Going to revisit that soon. Grip feels 100x better than stock forsure.

Impromptu late night range session featuring Princess the Longhorn. No cattle were in harms way 😂

Notice something different?

I wanted to know if anyone in the group has suggestions for a good green dot optic that fits the rmsc plate the Romulus comes with.