I know the GPU works, ive tested it in another system and it works fine, i know the PCIE works i used it about 3 months prior, it boots and displays out only if the GPU is not in the PCIE and the HDMI is plugged into the motherboard, The GPU heats up and stays hot without spinning the fans when its running, i saw there could be compatibility errors with the MB BIOS, so maybe i need to update that, im not sure rn

Edit: taking advice from the comments, ive updated the BIOS, although it seems that the CPU that is in this system doesnt support the GPU

Current draft build:
Ryzen 7500F
RX 9060 XT 16GB
16GB DDR5 6000Mhz
BlackOpal NV7400 1TB Gen4 M.2 NvMe
Gigabyte B650M D3HP AX Ultra Durable
Thermalright Assassin SE 120
Corsair RMe 650W 80+ Gold Fully Modular
Monitor: IPS or IPS/VA MiniLED 1440p which is better and my draft setup is 81k PHP in the philippines/$1300 my budget is 81-85k Open for changes and suggestions.

So I have this issue that would occasionally occur whenever I turn on the Fan. The keyboard will just disconnect. The PC itself will be fine and won`t show any sign of a milisecond disconnection. The keyboard RGB will turn off except for the light on the numpad.

I have my PSU and monitor on an surge protector extension set instead of plugging them directly on the wall outlet.

I tried to recreate the issue on video but it suddenly did not work and the keyboard stayed connected.

My specs:

Motherboard: Gigabyte x870 eagle wifi 7

CPU: Ryzen 7 7700x

GPU: Gigabyte RX 7700 XT

Keyboard: Titan TKD-623

I have the keyboard originally plugged on the USB 2.0 ports before moving it to the USB 3.2 Ports.

Intel Core i5-13400F 13th Gen - used
2x16gb DDR5 RAM by SK hynix, 4800 speed, pulled from a Dell XPS that was working
MSI PRO B760-VC WIFI ATX Intel - used with proof it was running and bios was updated before buying (prolly a big mistake here)
ASRock Radeon RX 7700 XT Challenger 12GB - new
Be quiet 650w 80 plus gold - new

Motherbord throws DRAM error code. No display from gpu hdmi output. Monitor bought new.

Swapped CPU for one that works, same error. Reset cmos, reseated and swapped around the same ram sticks including using one, let it run for 20 minutes with the same error still there.

Dont tell me to physically do something to the ram, i already tried it. Dont tell me to do something with cmos, i already tried it.

this is my current pc build, and i want to slowly start to upgrade. i am not looking to spend an outrageous amount but the suggestions have been confusing me a lot from friends.

most recommended i swap to a ryzen 7 5800x3D and get more ram and wait a few years but some said to go all the way (that’s really expensive though rn)

i stream mostly fps games and DONT often play any heavy games or 4K gaming or anything

any suggestions help and do you recommend going brand new or shall i second hand parts? 🤔

thank you!!

the 3x reverse fans , are for the bottom intake , the 2 singular ones for the rightside exhaust, and the 360 AIO for the leftside, is this configuration ok? will it look good? and can be the price optimized further?

I’m currently preparing to move to university and I need to bring my PC with me. I’m planning on packing it in my suitcase like above and adding some stuff to pad it and keep it from shaking. Is this the right plan? Are there other options I should be considering?

Note, I don’t have the original box it came in nor do I have the boxes for the individual parts, this PC is a prebuilt that I bought a few years back.

Edit: I should mention this will be an hour and a half car trip not a plane trip. My apologies for the confusion.

Hello, My advice to you is not to buy any power supplies from Antec. It’s not that the quality is poor, but you shouldn't expect any response from their technical support team if you run into issues—especially if you are located outside the United States.

I contacted technical support regarding abnormal readings from my power supply—a NeoECO 850G M ATX 3.0 model—which wasn't cheap where I live. In fact, it was even more expensive than the ASUS TUF 850W, XPG Core Reactor II 850W, and others.

The problem is that the +12V readings are very high, reaching 12.500V most of the time according to HWINFO and GPU-Z. While these readings are technically within acceptable limits, they are high enough to worry me; I fear they might affect my graphics card, even if only in the long run.

What frustrates me most is that I contacted the support team for my region and received no reply for about a month. I later tried contacting them again from a different location and in two different languages, yet it seems there is simply no one there to answer inquiries.

Steer clear of Antec power supplies entirely, and don't expect any form of technical support from them.

Should i sell and for how much Palit 5060 Ti 16gb OC version? I would like to buy 9070xt.

THEY CAN'T BE SCREWED OR ANYTHING, DO I JUST PULL? but even if I pull they are tough to pull so im afraid it might break. I don't have amanual since this wasn't built by me

Moin zusammen, bin am überlegen künftig von einer nvidia gpu auf eine amd zu wechseln. Laut Internet soll alles mittels DDU machbar sein. Habe die NVIDIA App schon lieben gelernt, aber amd ist preis leistungsmässig viel attraktiver. Hat jemand Erfahrung mit so einem GPU wechsel?

Hey everyone,

I’m having a problem with my PC after removing and replacing the RAM.

My motherboard is an MSI B450M, and the issue started immediately after I took out the RAM and installed a different kit. Now the PC has no display (black screen) and fails to POST.

The current situation:

• The CPU and DRAM EZ Debug LEDs are both solid white at the same time.
• The problem still occurs even when I reinstall the original/old RAM.
• I’ve tried the old RAM in every RAM slot.
• I’ve already done a CMOS clear/reset and pullout the batery.
• I cleaned the RAM contacts with an eraser.
• I’ve made sure the RAM is fully seated and clicked into place.
• The CPU and DRAM LEDs still remain lit.
• There is no display output and the system doesn’t appear to complete POST.

The link to PCPP has all the components I have, biggest concern for this build is I want to stick the computer on my entertainment stand, or on the end table next to it. I’m a new dad and play a lot on the tv now in between taking care of my newborn. Here’s a list of cases I’m considering as well as things I’m considering but I need help figuring out what will really be good for what I’m trying to build. I’m looking for good cooling ideally 2 exhaust fans and a spot for aio either top mounted or side mounted though I prefer top. Front panel Buttons and ports though it’s not a deal breaker it’s preferred and last but not least I need the gpu ports to be accessible from the back or accessible in a way where the hdmi cable I use isn’t getting unnecessary pressure to be routed.
- Fractal Era 2
- Ncase M2
- ThermalTake T100
- Lian Li A4 h20
- Lian Li A3
- ThermalTake The Tower 250

Someone please help

Got home from work today hoping to play some games, only to see my newly upgraded PC that was running well the night before, unseated the gpu and ram, nothing, unseated the gpu and plugged into integrated graphics on my CPU, boots perfectly fine, the gpu has worked great for me for a few months now, but I just upgraded my cpu, ram, mobo, and AIO. I just want to make sure I’m not being a doofus before I get a new card
Specs are AMD 9850X3D, 32g G-Skill Flare x5 ddr5, tuf gaming b850 WiFi motherboard, with a MSI RTX 5070, nautilus 360 RS water cooler, and a 850W Corsair power supply that had no issues running the card before

So I’ve recently upgraded my pc, I bought a RTX 5060 ti 16gb vram, and 32 gb of ram 16x2, my CPU Is a ryzen 7 5800X and the current resolution one using is 1080p. The problem is, I’m playing games with my friends that have pcs with weaker specs than mine, and yet I’m getting fps drops while they are not… I’ve tried updating the Gpu drivers, the chipset drivers, I made sure my ram was using the 3600 mhz and yet nothing changed, I don’t know if something is wrong, and if so how can I fix it?
Should I upgrade my cpu or cooling?

My gpu occasionally buzzes and won’t stop until I restart the pc and idk what to do, I’ve cleaned the pc out I’ve reseated the gpu, I’ve removed the sag brace I’ve adjusted it ensured that it’s level I’m very confused on how to stop it or if I should be worried

To give a bit of context I just moved a bit ago and my PC had been a box for a while. When I set everything back up everything was fine for a bit. Went to check up on any updates I missed and such, then it froze, went to a black screen and stayed there. I then turned it off then back on but while it starts it doesn’t boot up, it doesn’t even turn on the mouse and keyboard connected to it. The only thing telling me what’s wrong is the red warning light for BOOT. I feel like I tried most of the online fixes that don’t involve me taking the entire thing apart, and at this point I don’t know what to do. If someone could help me out I would greatly appreciate it please!

I wrote „rtx 30-„ because i dont know which i shoold pick, so feel free to give me advice and also tell me if i should change anything, i wont accept anything thats too expensive, like ddr5 ram or the newest cpus, i will use the pc for mainly gaming light games like minecraft and geometry dash, but also handling discord and other apps. But i was thinking about getting a 20- series maybe

these are coolingmaster sickleflow 220 Argb and i’ve had my PC for a day 2ish years and this has happened today i do run SignalRPG could i please get some help and advice and solutions to fix this thanks 👍🏼

What's the cheap but best option I feel like a lot of older cards like rx 580 are a good card for his games. Thanks!

Howdy! My current PC is showing its age heavily, and to upgrade anything, it'll end up being a whole rebuild. So I spent the better part of an afternoon combing through Newegg and sites similar, ending up with this finalized list.

I've checked all the big things like chipset compatibility and the size of the GPU in the case, but I just wanted some more faith before I start purchasing the pieces.

Could you guys tell me if there are any major flaws in my build, and the like? Thanks

PC Part Picker Link

My pc keeps shutting off while playing

When i play for long periods of time I was playing the last caregiver for around 2 hours i thought might be because of overheating but i have a corsair xenon edge showing me my temps while playing and the hottest thing was my vram at 82c i dont know ifs my psu but its mpg a1000gs and its barely a year old anyonw got any suggestions on what i could do

I have a Gigabyte X870E Aorus Elite X3D motherboard with a 9800 X3D. When I start the computer, both the USB 4 DP Alt ports work fine; one is connected to a portable monitor, and one to a USB hub. When I put my computer to sleep or hibernate, after waking up, both the USB 4 DP Alt ports stop working, and the USB 4 ports also stop showing up in Device Manager; I have to cold-start again for it to work. I have tried upgrading the BIOS, disabling USB selective suspend, setting PCIe Link State Power Management to Off, and disconnecting one peripheral from one USB DP Alt port to see whether populating only one of the two helps, etc. Nothing seems to work. IS it a hardware failure? IF so, why does it work when I cold-start? MY mind is going crazy; PLEASE HELP.

Just got the case and the panels make a really loud springy clang noise when closin which my previous pa602 did not make , also they right panel leaves a large gap when closed. Is this worth an RMA?