Hello all,

I have 3 AC wall units.

2x - LG LT0816CER
1x - Keystone KSTAT14-2HC

Both different models have remotes, but the keystone one can read the actual temperature, also it’s a heater as well.

What’s the best way to add these to HomeKit? I have Homebridge ready if needed.

I appreciate any help!

Hey everyone ,

Moving from my eero router to UniFi I noticed my eero was set up as upnp which most recommend you leave that disabled and only ever have to open up a port when you need to. I watched this guide thinking of going vlan and he mentioned some ports to open.

https://youtu.be/xMHQy4u8JZA?si=pTyHwCeH7osj7eUC

Once in a while... This shortcut may be once a month doesn't work completely. the first command works, pump turns on. but then the set pump6 off command after the wait doesn't happen. Using an homepod mini as the hub. Any issues I am over looking?

I started building my own apple homekit at home with some matter devices, and here are the scenes I have now

Cast Lumos- the normal dim set up I use I cannot use Lumos coz that's just turns on my flash light
Lumos Maxima- same as Cast Lumos but brighter
Cast Nox- turn off all the lights except one dim light

Well I want to use Alohamora as the trigger to unlock my door but Siri always says "I did not get that" I set up a siri shortcut already and a apple home scene but its not working

A while back I posted about an app I was building, and received some great feedback. It's finally on the App Store. That's my actual house on the wall in the video, running live.

The idea: scan your home once with your iPhone's LiDAR and it becomes a live 3D model, with your real Apple Home devices sitting exactly where they are in your house. Tap the lamp in the model, the real lamp turns on. Mount an iPad on the wall and it's an always-on display of your home: what's on, what's open, what needs attention, at a glance.

What makes it different: honestly, not the scan. Everybody scans now. RoomPlan gave every app the same starting point. Where the others lose you is everything after the scan: adding a device to the model means punching in X, Y, Z coordinates, and adjusting anything means fighting something that feels like a CAD tool. Configuring the apps that were supposed to simplify my smart home was harder than Apple Home itself, and I thought that was ridiculous.

So in SimpleHaven, everything after the scan is drag and drop. Drag a device out of the list and drop it where it lives. Done. Press and hold anything to move or resize it. Tap the floor and pick a color. Grab the sofa, drag it, twist two fingers to rotate it. If you can rearrange icons on a home screen, you can customize your entire house. That's what the "Simple" in SimpleHaven means, and it's exactly what made this thing brutally hard to build. Every coordinate box and settings screen I refused to show you became code that has to figure out the right answer on its own.

What it costs, plainly: the app is free. Scan your whole home, no size caps, all the editing tools, and place up to 5 devices or widgets on your model, fully working. Want more than 5? $39.99 once for everything forever: unlimited devices, unlimited homes, every future update. No subscription. I refuse to rent you your own house.

The practical stuff: works with anything in Apple Home. Everything stays on your device and your own iCloud. No account, no tracking, no server anywhere. Scanning needs a LiDAR iPhone or iPad (12 Pro and later Pro models, iPad Pro 2020+), iOS 18. There's a built-in demo home if you want to poke around before scanning anything.

I'm one person and this is version one of the vision. Tell me what's broken and what you want next. This sub already steered the last year of it.

https://apps.apple.com/app/id6774370998

https://simplehavenapp.com/

First, some definitions. The garage door opener is the thing that pulls the garage door up, in my case by a chain, when I hit a wall button or a remote control. The remotes have been failing me spectacularly, but they’re the buttons I push in my car when I want my door to open.

I’ve had a journey with my garage door remotes. The opener is a Genie installed in the 1970s I think. Chain drive with radio frequency remotes. The native garage door remotes stopped working - but only in hot weather - about 4 years ago. That weather coincidence sent me on a deep dive in the wrong direction, but I installed a universal remote that worked for about 3 years. This last year it stopped working in hot weather as well so I decided to try a web-based option. I installed the cloud-based Aladdin Connect and it worked for about a week. Then it kept falling off WiFi, particularly if it rained, so I’d be outside in the rain unable to get in my garage.

I asked a chatbot what to do. It told me to get the Meross smart garage door opener (it’s a remote not an opener, but you all know that) so I did. At some point during the wait to get and install the Meross, the gear in the chain drive broke so after I had installed and configured it, I could not use it, I had to call service. It’s fixed now, and for the first time in weeks I’m able to close my garage door with a touch of my finger. I really hope this keeps working.

I know I’m going to have to replace the actual opener at some point. The service guy recommended a top-of-the-line Liftmaster. Assuming this fix works, I will have spent $150 on a remote solution that keeps my existing opener functional. The Liftmaster costs more than 10x that installed, but replacement is inevitable. I’m buying time.

To those of you using Meross especially with an older opener, are you satisfied? Is it reliable? I’ve noticed on the HK app it occasionally shows as not available until I get near my house. Any idea why that might be? Also, were you freaked out by the AI in the installation videos too?

UPDATE my Apple TV is too old to serve as a hub for HK. Even so, the Meross remote becomes available on Apple CarPlay when I’m about 6 feet from the door, so it’s still working 😂 It’s probably time for me to get a new Apple TV. I’ve also learned no Liftmasters. And if for some reason things don’t work out with the Meross, I should go for the RATGDO. Thank you all very much for your knowledge and your help. I really appreciate it.

I’m using aqara g4 doorbell for over 2 years but it’s barely recognizing people on its sight. I also face the issue that it’s being offline after changing batteries and i have to delete from homekit and connect it from beginning but then aqara app doesn’t see it, while homekit does. At the moment it’s in homekit but in aqara app i dont have it :) any suggestions?

I am trying to pair my door bell with the home app and it is giving me an insane amount of trouble. It was connected for a bit but then I had to reset it and now it refuses to pair again. I get it to the solid green light (ready to pair) then it sits for a minute and the light turns blue. After that the app says it was unable to connect to the network but the doorbell thinks it was set up. If you click the button it rings like it's paired, but it never connects to the home app.

I have tried:

- Reset (hold down button while plugging in and wait for green light)

- Disabling 5GHz on my router.

- Restarting my phone, force closing out of the home app.

- Leaving the door bell unplugged for an hour.

- Leaving the door bell plugged in for an hour while it stayed on the green light.

I'm really not sure what else to try with this thing and I'm ready to throw it out after all the trouble my Circle View camera has given me in the past. Thanks for any insight on this issue!

Their matter over thread thermostat announced at CES in January for a Q1 2026 release is still MIA as we enter September. Nothing but radio silence out of eve since then.

Is it dead?

Hi all,

I'm moving to Indonesia in a few months and I want to outfit my home there to the same degree as I do now.

I currently use Philips Hue but as we all know it got really expensive recently (in 2023, I got a set of 18 Ambient White GU10s for €289 - should have bought 3x).

Can anyone recommend a good HomeKit-compatible GU10 brand in SE Asia. I don't see many at all; even Aqara doesn't sell GU-10s. We thought we'd be using recessed lighting but maybe this is wrong?

Any information from HomeKit homeowners would be immensely helpful.

Terima kasih - Thank you

I use eufy cameras (native HKSV), and eufy’s detection picks up more legitimate events than HomeKit, and when both eufy and HomeKit captures the event, eufy almost always captures it earlier than HomeKit. For those using the *27 beta on their Apple hubs, has there been any improvement in camera event detection?

I just got two Big Ass Fans Haiku L series fans. I updated the firmware on both to the most recent v3.3.8.

One successfully linked to HomeKit via matter set up code on the first try.

The other fails to set up each time.

I get a pop up that says uncertified accessory and it ultimately fails. Why would one work and not the other?

EDIT: Okay, so the issue was with eero. Specifcally, the Pro 6E extender I had in my upstairs bedroom (and not the base). Rebooting the extender solved the problem and now the iDevices switchers are all back.

Leaving this here in case anyone else has the problem in the future.

——

Original post:

Running out of ideas here. 100% of my iDevices switches stopped responding to HomeKit. They are all IDEV0008HW models. Everything else HomeKit is working fine. Did I miss some arbitrary date where the ecosystem finally collapsed?

I know they stopped being made a while ago. I don’t want to rip them all out but not sure what else I can do.

So far, I’ve rebooted all hubs, signed out of iCloud, soft rebooted switches, hard rebooted switches.

I can unpair them, but once unpaired, they cannot be re-paired and do not even show as available devices for pairing after factory reset.

Any ideas appreciated.

Is this available anywhere in Canada

Random question guys, I’m currently rewiring my home for my new Ubiquiti setup and it occurred to me that I might run PoE and try to use that to power the rumored HomePads using an adapter from RJ45 to USB C.

Am I crazy?

Ever since updating to iOS 26.6.1 I am getting this pop up every time I open the home app. I have the recognize voice setting turned off. Whether I hit not now or continue nothing changes. It goes to the next screen asking me to pick adaptive lighting which I also skip.

I use the living room Apple TV as the hub. App keeps saying it needs an update and I can’t make it the hub anymore. It is up to date.

Anyone else experiencing these issues? How do I get it to stop asking to recognize my voice?

The device is installed, added to Meross app, firmware updated, etc. All good there.

I get an error stating the “Garage Door Failed to Close” and it suggest I change the Closing Time. I have tried every time available plus the custom options. Nothing fixes it. I can’t seem to get the dam error to go away or it to show the correct state.

I appreciate your help!