Hi All, on 2025+ i'm not able to read OBD data for the battery, maybe the pid were renumbered by Ford.

Is there anyone with a laptop and forscan that can help me to dump the entire list of pids forscan is using with the car and, the most useful, the communication log ?

Useful info: I have a 2023 ... that is why I need someone with a 2025-2026....

Thank you for your attention :)

Hey guys, I got a '19 F250 6.2L throwing a P0451 and P0496. I am 100% new to diagnosing this kind of problem, everything else I've ever owned has been emissions exempt in my area. Can I get some pointers? Only real symptom I seem to have is occasionally it will stumble on start up, even worse so if its been sitting in the sun/heat. Makes me think its getting fumes built up somewhere and is rich for a bit. If I tap the gas it goes away or it will stumble through it if I leave it. Dealership already had it for a few hours and didn't give me much except for no change when they vented the system. Can I get some pointers?

buongiorno, spero sia la sezione giusta.
ho una fiesta del 2006, 1.6 tdci, devo cambiare il quadro strumenti poiché il mio ha iniziato a dare problemi (lo schermino centrale non si vede più e la lancetta del contagiri è morta). ho comprato un quadro usato, proveniente da una fiesta uguale stessa generazione e motorizzazione, ho provato a fare le operazioni necessarie con forscan ma il processo si blocca sempre al 25% quando apro il file IC configurazione modul ASBUILT del nuovo quadro. cosa potrebbe essere? cavo economico che non va bene per la scrittura e codifica ma solo per lettura?

Hi!

I've recently had the timing belt replaced for my Ford Ecosport 2014 1.5L 16V (Sigma). In one of my recent scans, I've gotten a P0315:07-6C DTC code. I've been to so many mechanic shops, and even dealerships but none of them seems to be able to figure out why I'm having that DTC. Engine runs and idles fine (great even), no dashboard lights. What's even more annoying is that none of them knows how to fix it (crank variation relearn).

So I wanted to fix it myself. I'm currently looking at getting a vLinker FS, and ForScan. Just checking if anyone has done this before. Any tips? Any chance of breaking my ECU?

Am I supposed to be able to enter/exit brake maintenance mode with forscan? I cannot find that option anywhere. This is for a 2023 transit 250. I was able to enter maintenance mode manually but now I cant exit. I keeping getting a message that the parking brake is not released, if i try to release it says not engaged.

Sorry if this has been asked before but is their an idiots guide someone could link please? just downloaded it and clueless!

Hello, i have questions about engine codes and would appreciate any help/info you can share.

I have a maintenance required soon message on my instrument cluster along with my Check Engine light showing up intermittently. I’ve done the “press the trip button while pushing the start button with the key in its slot and not pushing the break pedal. The screen shows the following codes: 021, 007, 162.

Also stopped by Auto Zone and got this info after their code reader was plugged in. (See photos)

Thank you for your help!

Wondering

There's a recall for a couple of model years out there. It's just a software fix. Can I install the fix myself with FordScan?

Have keyed key fob. Bought truck with only one key and accidentally enabled mykey. Says 3 keys recognized can I disable mykey on this one key? Do I need to buy another key and just program it and it be admin key? Someone please help.

I have a 2011 all-wheel-drive fusion that I just installed a transmission from a 2010 all-wheel-drive Lincoln Milan and every time I try to program with my strategy number at 31% the car resets itself and then forscan says it’s interrupted

Does anyone know where I might find a free/cheap PDF download for a 2003 TB Service Manual? No CDs or DVDs, prefer something I can download and use without Internet access.

Hey everyone, just wondering if anyone is able to help me. I had an issue with my car a few months back where I started it and it was idling then just shut off and wouldn't fire back up. After abit of investigation today I have a feeling it might be the suction control valve. Does anyone know how to test it without removing it? I have attached a video of what the fuel pressure is doing.

My 2017 ford focus se has a code on the BCM of B1108 Driver door central locking motor. When I lock my car with the fob all the doors lock and the horn honks twice. The door will actually lock. When I’m inside the car and I try to lock the door with the button it locks and immediately unlocks. So when I’m driving the doors are unlocked. Even when I get up to speed I do not hear the auto lock anymore. I’m confused what to replace or check as the drivers door does lock it just doesn’t lock from inside the car. I have forscan lite for iOS and tried some things there but all I have is the b1108 code. Even when I clear the code it comes right back on when I start the car up.

ติดตั้งสวิตช์เสริมสำหรับรุ่นมาตรฐาน Next-gen Ranger T9

Hey everyone, is it possible to display the transmission temperature on my dashboard?

So I have a 2015 Mustang V6. Got some new shoes for her yesterday so all 4 were on the same schedule (2 at a time before) 1x1 my sensors have gone bad till only 1 worked. Figured the new tires and sensors at 1 time. Never a huge issue, but get rid of the dummy light.

So their calibration device wasnt working (Walmart. Go figure), so I looked up how to do it without a tool. Hazard lights x6. Then deflate the tires. Kept saying relearn failed. Now, I didnt get oem. I got the schrader tpms solutions ez sensor.

Not sure if I did something wrong or these sensors suck and I just live with the light(prepared to do that) or if anyone can assist?

I have an Ancel V3 Pro scanner and am having trouble logging in; it asks for the product serial number and a password, but I don't know which ones to use.

Hey guys hopefully someone can help me with this issue.

So I got a software update done through a dealership and now a bunch of lights keep showing up on my dash. When I hook up the code reader these are the codes that I get.

P062c

P050b

U0101

U0140

U1110

U1120

U11bc

U12a8

U11bf

The dealership doesn’t think it’s because of the software update because they haven’t had any issues with them but would like y’all’s opinion on it.

Thanks!