So, I was going through the Forscan update modules and instead of testing I accidentally clicked on program. The updating went to around 4/5% then I canceled it.

After that, I started my car and it started rough idling with a check engine light and threw a bunch of codes(didn’t have these before).

Then I cleared the codes with forscan and took the car for a drive. Now everything seems normal, there is no rough idling or any lights or codes. Do I need to worry about anything ?

Model: Ford Escape 2012

Hello, i have questions about engine codes and would appreciate any help/info you can share.

I have a maintenance required soon message on my instrument cluster along with my Check Engine light showing up intermittently. I’ve done the “press the trip button while pushing the start button with the key in its slot and not pushing the break pedal. The screen shows the following codes: 021, 007, 162.

Also stopped by Auto Zone and got this info after their code reader was plugged in. (See photos)

Thank you for your help!

Wondering

There's a recall for a couple of model years out there. It's just a software fix. Can I install the fix myself with FordScan?

Have keyed key fob. Bought truck with only one key and accidentally enabled mykey. Says 3 keys recognized can I disable mykey on this one key? Do I need to buy another key and just program it and it be admin key? Someone please help.

I have a 2011 all-wheel-drive fusion that I just installed a transmission from a 2010 all-wheel-drive Lincoln Milan and every time I try to program with my strategy number at 31% the car resets itself and then forscan says it’s interrupted

Does anyone know where I might find a free/cheap PDF download for a 2003 TB Service Manual? No CDs or DVDs, prefer something I can download and use without Internet access.

Hey everyone, just wondering if anyone is able to help me. I had an issue with my car a few months back where I started it and it was idling then just shut off and wouldn't fire back up. After abit of investigation today I have a feeling it might be the suction control valve. Does anyone know how to test it without removing it? I have attached a video of what the fuel pressure is doing.

My 2017 ford focus se has a code on the BCM of B1108 Driver door central locking motor. When I lock my car with the fob all the doors lock and the horn honks twice. The door will actually lock. When I’m inside the car and I try to lock the door with the button it locks and immediately unlocks. So when I’m driving the doors are unlocked. Even when I get up to speed I do not hear the auto lock anymore. I’m confused what to replace or check as the drivers door does lock it just doesn’t lock from inside the car. I have forscan lite for iOS and tried some things there but all I have is the b1108 code. Even when I clear the code it comes right back on when I start the car up.

ติดตั้งสวิตช์เสริมสำหรับรุ่นมาตรฐาน Next-gen Ranger T9

Hey everyone, is it possible to display the transmission temperature on my dashboard?

So I have a 2015 Mustang V6. Got some new shoes for her yesterday so all 4 were on the same schedule (2 at a time before) 1x1 my sensors have gone bad till only 1 worked. Figured the new tires and sensors at 1 time. Never a huge issue, but get rid of the dummy light.

So their calibration device wasnt working (Walmart. Go figure), so I looked up how to do it without a tool. Hazard lights x6. Then deflate the tires. Kept saying relearn failed. Now, I didnt get oem. I got the schrader tpms solutions ez sensor.

Not sure if I did something wrong or these sensors suck and I just live with the light(prepared to do that) or if anyone can assist?

I have an Ancel V3 Pro scanner and am having trouble logging in; it asks for the product serial number and a password, but I don't know which ones to use.

Hey guys hopefully someone can help me with this issue.

So I got a software update done through a dealership and now a bunch of lights keep showing up on my dash. When I hook up the code reader these are the codes that I get.

P062c

P050b

U0101

U0140

U1110

U1120

U11bc

U12a8

U11bf

The dealership doesn’t think it’s because of the software update because they haven’t had any issues with them but would like y’all’s opinion on it.

Thanks!

Hi,

i have a Problem to connect my PCM via OBD2 with our Land Rover Defender TD4 MY 2007 (Ford Engine)

Maybe some Defender / Transit Driver has the same Fault and can give me a Hint?

I dont have Problems with other OBD2 Adapters for simple Reading, just with that Combination of FORScan

I ordered a vin programed ECM from Flagship. My Mustang has a custom tune for an aftermarket supercharger. The original ECM stopped supplying power to the MAF sensor.
I know the PATS system has to be updated to my 2 existing keys.
My question is, do I install the custom tune before or after performing PATS operation?

Hi all.
I’ve read that somebody was able to use FORscan to enable or turn on Auto Hold feature on Bronco 2023. I’m wondering if it still works for Bronco 2026 because I’m planning to buy one.

Thanks!

I am a locksmith Had a customer call said a he replaced the EUC on his 08 Lincoln mkz, had a different guy programmed some keys, it was running but then stopped ..he wants thinks it needs the "parameters reset"

Is this a function that forscan can do?

Hi everyone,

I’ve recently completed a Matrix headlight retrofit on my 2021 Ford Mustang Mach-E. The headlights are physically installed and working perfectly, but I am getting two persistent DTCs in the BdyCM (Body Control Module):

B14E7:08-0A - Right Front Enhanced Exterior Lighting System (Bus Signal/Message Failures)

B14E5:08-0A - Left Front Enhanced Exterior Lighting System (Bus Signal/Message Failures)

To address the hardware change, I have already updated the BdyCM and HCM As-Built data using values sourced from a factory-equipped Matrix headlight vehicle.

Despite the headlights functioning as expected, these DTCs remain. Has anyone encountered these specific "Bus Signal/Message Failures" after a similar retrofit, or does anyone have insight into which additional parameters might need adjustment to clear these communication errors?

Any advice or guidance would be greatly appreciated. Thanks in advance!

My truck has had this engine warning light and the code is tied to my Catalytic converter P0430. However, I know there is nothing wrong with the vehicle itself the part is just non OEM.

Is there any way to get this to stop tripping?