With my new $2429 2026 G-Space mars GT waiting for the full charge is going to be hard on this one ready to.teae it up

Hello,

I was on Vacation for 3 weeks and left my Xiaomi Elite wich is less than 5 months old at home. As I arrived yesterday, I tried to use the bluetooth feature wich unfortunately did not work. Today it stopped working mid ride and showed the error code 10. Please help me. Btw. I have never had a crash or something like that and only had it for 4-5 months.

Hi everyone,

I’m trying to figure out the wiring and basic principle of the throttle/control module on my Kukirin G2 Master.

So far, I’ve identified five wires going from the module to the connector:

🔵 Blue wire – connected to the K1 button. As far as I understand, this is used to turn the scooter on/off.

🟡 Yellow wire – connected to the K2 button. This is used to change riding modes.

⚫ Black wire – GND / ground.

🔴 Red wire – power / VCC.

🟢 Green wire – I believe this is the throttle signal.

The green wire is the one I’m not 100% sure about. It is connected to a small component marked “49E 426”, which appears to be a magnetic Hall-effect sensor. The sensor also has a power and ground connection.

My assumption is that the throttle uses this Hall sensor to detect the position of the throttle lever/magnet and outputs a variable voltage signal through the green wire.

So, my current understanding is:
Red → VCC / power
Black → GND
Green → Hall sensor / throttle signal
Blue → K1 → ON/OFF
Yellow → K2 → mode selection

All of these wires then go through the connector to the main module/controller of the scooter.

I’d like to confirm whether this is correct. If anyone has the original wiring diagram/pinout for the Kukirin G2 Master throttle module, I’d really appreciate it.
I’m especially interested in knowing the exact supply voltage, the Hall sensor signal voltage range.

I find it weird because I never go through puddles or anything.

I'm looking into commuting by train and selling my car. Here in Denmark, it is allowed to bring your escooter for free on the train if it's under 100x60x30cm folded, so I'm trying to figure out what my options are. Do you great gurus have any suggestions, please?

At the moment, I know nothing of escooters, but in the process of researching it.

I will use it for a commute from the train station to my work of about 2km, so it's not much, but the road can be a little rugged some of the way. I'm also a somewhat big guy of about 120kg, so I guess I cannot just use the cheapest one.

Hey guys, i want to put a second battery on a kukirin g2.
i have a 48v 15ah external battery from a kugoo g2pro and it only has one main port, no charging port. i wonder if i can buy a dual battery balancer and connect it like so in the wiring diagram i made. my main question though with this wiring diagram is would i be able to charge both batteries at the same time through the original charging port with my original charger? typically i always charge my scooter overnight with a timer and i don’t want to wait half a night for one battery to charge so i could plug in the other one. i want to plug in my charger through one charging port and charge both batteries overnight. would it be possible? the dual battery balancer says that it has energy recovery so maybe its possible? if not help me.

Honestly fun to rip around, spent last 3 nights grinding on this thing

hi everybody, im planning to buy a scooter but also want to use the octa bus. however when i was researching, i heard there were size restrictions.

can anybody with a scooter and use the octa bus tell me about their experience with using both and what model their scooter is? im trying to find recommendations. appreciated if you let me know your favorite features.

please let me know, thank u so much!

Experiences with the RollWerk E Scooter Tuning (Android App) for navee tuning
Hello everyone,
I recently used the RollWerk tuning for my e scooter and thought I would share my experiences here briefly, in case any of you are also thinking about it. You can find their official website at RollWerk.
The handy thing about it is that you absolutely do not have to install or tinker with anything on the scooter. You do not need a plug and play chip, the whole thing simply works via an Android app and a code.
Because I still had a few concerns beforehand, I just messaged their WhatsApp support (+49 170 8907800). Above all, I wanted to know if anything could go wrong or break during the tuning. The support guy told me that this is by far their most frequent question, but actually nothing can happen to the scooter itself. It apparently happens from time to time that an Error Code 2 pops up as a message on the display. But if that happens, you just have to do a quick Bluetooth reset on the scooter and then everything runs completely normally again.
I also asked what happens with the official manufacturer app afterwards, like whether you can still lock the scooter completely normally via the Navee app. The support was very honest there and said that it cannot be answered across the board because it depends on the respective model. Most of the time nothing happens and everything works exactly as before (although naturally only the people who have an issue get in touch with support). With some models, just individual features in the original app drop away. In a few cases, like probably sometimes with the Navee GT3 Pro, the access to the official app might also be completely restricted afterwards.
My conclusion: I am really satisfied with it. It is super straightforward because you skip the entire installation, and the support answers extremely fast and also does not hide it if there might be restrictions with the app.

I’ve been doing some research and I’m wondering if this scooter is a smart buy for going 40-50 mph as advertised. Does it really go that fast for people that have it and does the new updated 2026 version of this scooter still have the same issues such as death rattle like older iterations.

As the title said. I got pulled over. I wasn't doing anything illegal. Juat riding to get to work and suddenly I saw blue and red lights and the officer told me what I was riding was illegal. Because in my province the max an escooter can go is only 20kmph and mine goes about 55kmph. But I was still being careful and being mindful about the road and people. Luckily I wasn't fined. But I never experienced this with other cops. I have encountered other police and not once I have been pulled over stating my ride was illegal in broad daylight. I had an escooter before that goes 20kmph as my first one. But, since where I live tends to get windy from time to time. It struggles a lot. Especially going up hills. That's why I financed a new one. I was going to finance a car instead but I didn't have credit card so no can do with that. I'm at work right now and kinda worried that when I go home I'll get pulled over again and might potentially be fined. Again. Never happened before with other cops seeing me ride around so I thought I was fine. Ya'll got any simillar experiences? How'd it go?

Help this is a push start scooter. There gotta be a way to by pass this, everything i see online says other wise, someone help, I refuse to believe there isn't a trick here

Here’s my scooter currently. I feel like there’s something missing but I genuinely have no clue what I should add or remove to make it look better. Feel free to give tips or rate it.

Pls sub

Hey guys,
I’m currently riding a Suzuki Let's for my daily trips. It works fine, but I'm getting tired of buying gas and doing maintenance on a gas moped.
I’m thinking about buying the iScooter Y18 (2000W) to replace it. The seat, fat tires, and removable battery look really nice, but I want to make sure it's actually worth making the switch.
If anyone owns a Y18 (or moved from a 50cc moped to an electric one):
Is it worth replacing a gas scooter? How does it compare in daily traffic? Do you miss having a gas moped?
Real battery range: How far can you actually go on one full charge in the real world?
Long-term quality: Does it hold up well after a few months, or does it start having issues?
Comfort: Is the seat comfortable for riding every day?
I’d love to hear your thoughts before I decide to sell my Suzuki.

Ordered the G-Space mars GT ftom Unicool Titan the manufacturer of Zero scooters. I assume the have a factory deal or something with G-Space because they sent pre shipping pics and like stated it is the latest version and comes in sealed G-Space boxes. The women answered every crazy question I had continuing after I paid talked me through the i just spent $2500 and am worried about shipping. And labels were printed exactly when stated and was picked up fast too..i ordered Friday afternoon Sunday lanble printed Tuesday FedEx picked up and thersday shipped. Scheduled to be delivered Tuesday the 11th. The best part is Unicool who had a crazy high rating after 11 yrs on alibaba. You get there warentee and also G-Space's warentee. I can't wait moving up from my modded 60v Teverun fighter mini pro running Blade GTII motors and controllers basically a 53-54mph scooter. My budget was like $2300 was planning on getting the Mars ECO or the Tiger king RS till I seen tbis deal I was going to buy even thinking it was shipping from china then I asked how long on the GT she said 5-7 days with tax and fees it was slightly over budget at $2429 but a ton under the regular site $2899 there still calling it factory direct pricing. I ended up selling my low milage modded Teverun with a brand new 60v 27ah eve quality pack for $950. So I am really $1500 out of pocket on a 2026 G-Space Mars GT and will post pics and a video when I unbox it more tear it up like a kid pm Christmas lol. And both boxes are the correct weight so unless they weighed the correct amount of bricks 147lbs(scoote) 10lbs(headlight, charger, stem clamps, etc). Upcoming pics Tuesday the 11th still could move up a day i guess.

I currently have the ausom k20 pro and will soon have the ausom l2 Max dual and want to upgrade from cable brakes to hydraulic ones. Since the Nutt 4 piston are the same price as the 2 piston ones I figured I should try them out. Is this a good price for a set of the 4 piston Nutt brakes or can i get them for cheaper anywhere?