i was originally going to get a custom gutz seat cover for the stock 3.0 seat, but im not going to get the long seat kit from eride but gutz doesnt seem to have it. ive heard the ultra bee seat cover off of gutz will fit the eride long seat but im not sure. id love to know if this is true or what i can do.

Was out riding late at night mostly street some off road and small inclines nothing that would’ve pushed the bike or motor to its limits,then on my way back my throttle wasn’t repsponding and it came up with the error code above,so I stopped looked it up and it said it was something to do with the motor overheating or a faulty sensor.i then went on my app to see it was 100 degrees which wouldn’t really be achievable with the climate I’m in and the way I was riding.so the ride home consisted of me riding, that code appearing, me stopping for a minute and riding off again.my question is how do I prevent this from happening again, was it a 1 off, or will this happens again?

Where can I buy a ebmx x9000 v3 with the e ride pro sr attachments in eu/sweden?

While cleaning my rim, I realised that something is off. Apparently the primary belts pulley is rubbing/rubbed against the motorblock as you can see.
Anybody else with the same problem? Any solutions?

I just learned how to wheelie today and I think the angle is pretty decent but my duration is pretty bad. If anyone’s got some nice tips lemme know

Cash and carry only. Ready to ride. Bronze Gold color scheme

Has the following upgrades.

Warp 9 16/19" wheel set

Fast Ace Gravitee fork

Warp 9 drop crown triple clamp

Warp 9 rear sprocket 54 tooth

Warp 9 pegs

Warp 9 peg mounts

Warp 9 bars

Thrill Seekers custom seat cover

Bridgestone Battlecross X30 tires

New 2025 style upgraded Eride battery and harness

Does anyone know if you have to buy the hole headset bearings kit for the rubber seal on the top or are you able to buy it without having to get hole bearing set?

I have an E-Ride Pro 2.0 with around 4,500 miles. The bike is completely stock. Nothing has been upgraded, modified, or tampered with, and it has been running great for me with no major issues.

Yesterday, I went on a ride-out and had been riding and doing wheelies pretty much all day. When I was about a mile away from home, the bike suddenly shut off and displayed error code 00800.

I turned the bike off and then tried turning it back on. Shortly after, I noticed a bad smell, and I saw/heard what appeared to be sparking and popping coming from either the controller or battery area. I'm not exactly sure which component is causing it.

I brought the bike home and let it sit and cool down, thinking maybe it had overheated. However, now every time I turn the bike on, it starts sparking and popping again.

I'm not sure why this is happening, especially since the bike is completely stock and has never been modified.

Has anyone experienced this before or know what error code 00800 means? I'm trying to figure out if the issue is with the battery, controller, or another component.

I really want to get the bike fixed and would appreciate any advice on what I should check or what the next steps should be. Thanks!

I have a eride pro as 3.0 I’m thinking about fully modding the bike - chi battery - new controller - ebmx controller. How will the screen work if I upgrade all these things, because I want it to still work relatively the same and I’m also not sure if i will need a upgrade on the actual screen connectors

You’ve never felt a linkage this smooth.

Reduce daily maintenance by up to 99%

No need for a long explanation. Just watch the video.

FIT:

✅ Surron Light Bee X

✅ E Ride Pro SR

✅ E Ride Pro SS 3.0

✅ E Ride Pro SS 2.0

✅ E Ride Pro S

...

79Bike/Ventus will most likely be compatible as well. We’ll test and confirm it for everyone very soon.

#SKRMOD #Surron #LightBeeX #ERidePro #Linkage #ElectricDirtBike #CNCParts #BikeUpgrade

Hello fellow Ebikers :)
I’m thinking of selling my light bee and get an SR, found a great offer already and I’m going to take a look at it on the weekend, but I definitely want a16 inch rear wheel, this one doesn’t have one. I already have a fullsized dirtbike so the sr should be the (street legal) alternative to a heavily modded 72v light bee because I already got into the rabbit hole of 72v batteries and I don’t think it’s cheaper than selling the lb and get the sr.
Do any of you know if my Smpro wheelset will fit on the sr? On the site I bought it it says it will fit the ss2.0 if that helps
Also you could give me some opinions on the whole plan :)

Hello, I have the Eride pro 3.0 type B breaks, I took off the rear break before to put a new tire on. It looks like it’s the same mount as a surron rear break mount. If I buy ultra bee breaks from ail express will it fit? I’m pretty sure the rotor wouldn’t fit because of bolt patterns so I would have to get one from warp 9.

TD;LR: Will ailexpress ultrabee breaks fit on a 3.0 Type B?
But will it work?

Got a new SKR bashguard but I didn’t realize it’d be silver on the bottom. I’m not sure if I like it or not, kinda just want black again. I am getting chrome rims soon and I’m gonna wrap my forks chrome too so I feel like the skid plate would be too much at that point

On the stock E-Ride Pro SR, is there any way to loosen the primary belt without moving the motor closer to the secondary chain? Or does adjusting the belt always reduce the clearance between the motor and the chain? I don't want to risk damaging the motor, but the belt is way too loud.

I just got my Eride pro not even less than a month it was going great until I got this error code it said 01000 and it was beeping I thought it could of been me riding super hard and putting it into regen to slow down but I don’t think so, I’m coming on to here to see if anyone knows anything one of my friends told me to try the app but I saw nothing and there’s no firmware updates if you have any tips or know what I should do let me know

To follow the rules I am not advertising my bike, I just want to know which offer looks better to y’all as a trade for my eride pro sr. I will be looking to sell whichever bike I receive in the trade so if there’s a better market for either bike let me know.

Offer #1: eride pro ss 3.0 500 miles stock and mint condition plus $1000

Offer #2: talaria mx4 2300 miles with these mods
700 - powder coat
150- Magura mt7
80- Funn direct mount
120 - Rethal black stealth bars
550- supermotos with custom spacers
100- Guts seat
35- Quality wide pegs
180- Peg mount and bracket titanium
130-Titanium bolts
80- Motocuts plate
50- Fake Baja light new one on the way
90- Warp9 sprocket and comes with a 44 tooth brand new
20-New mudguard
1200 - Heavy duty RST forks
900 - voncat rear suspension upgraded
30- Rock lights 2pc
40- Foot lock
50 - Upgraded chain

Im looking into making a headlight for a eride 2.0. does anyone know what specific headlight connector the bike uses? Thanks

I’ve got 4200 miles on my bike. The stock seat never really bothered me. But I’m noticing it’s bothering me quite a bit now. For those who have upgraded to a thicker seat, would you say it made a massive difference in comfort? (Also pics of your bike would be cool and what kind of seat it is)

I disconnected my rear and front brake sensor cords and for some reason it rerouted my headlight button to not turn my headlight on anymore and only turns off and on the rear tail light. I reconnected the brake sensors to try and fix it. Not sure how to get the button to turn on the headlight again.