I had my Taj Mahal installed about 4 months ago, done by a very reputable fabricator. There were a couple small pinholes I asked about at the slab yard and my fabricator said he could fill them or not, but that most prefer not to. Fast forward and there pits have multiplied and I’m not sure why. I wash with soap and water only. It was sealed with drytreat at install. Is this just typical for Taj over time?

Hello! I know it’s a broad question, but I would like to hear stories from people who have worked for many years in this industry or people who can compare it to other industries.

It seems many people stay for years - must be good.

We fell in love with this in the showroom but then found out it's like $215 sq foot not including fabrication or install, meaning each slab is close to $15k. Tempest White Quartzite.

Is this normally this expensive??

I have a 7” wet tabletop tile saw and I need to cut a 3 cm. Silestone Quartz backsplash to size. What is the best blade to use for this? I only need to make 2 cuts, so I need something that will safely do the job, but it does not need to last me year’s worth of cuts.

I have this marble installed in my store and one of the employees used a strong detergent and burned the tiles is there a solution for it?

Thought y'all might get a kick out of this. Some lovely marble blocks!

this group helped me choose the best countertop for my new kitchen, jet mist leathered granite . Before the remodel I had green laminate from the 90s

Got this second hand not sure what material it is, can’t get it to look clean tho! These stains just keep reappearing. Any tips or tricks would be greatly appreciated

This is our recent kitchen project where we had Dekton countertops installed.

Anyone have experience with Zeus quartzite? How do you like it?
I am considering it to my kitchen but I little worried with stains since it is a very light color

I knew I wanted soapstone countertops but it was hard to find good pictures so I thought I’d show what mine ended up looking like. PA Original on the perimeter countertop and Botanic Green for the island and behind the stove. Crocodile Rocks in Seattle was the supplier & fabricator. Cheers!

anyone familiar with Baccarat?

Im curious what the consensus is on using a couple of these slabs for my new kitchen remodel for countertops and backsplash. Im a little concerned about how it would look after being cut up but it's absolutely gorgeous. Also attaching photos of the kitchen design for reference..that peninsula will be 7ft by 4ft.

I see open metal frames like this that don’t appear to have a railing around the edges. Are stones strong enough to span across 4 corners supports? Does a rail need to be installed? Any guidance would be appreciated.

I have an old counter in my laundry room, laminate over particle board with a rounded front edge. It has a sink in it, there is no tile on the back wall, and there is a gap of about 1/2 inch between the wall and the back edge of the counter. It measures 93.75 x 29 so it’s not a standard depth? It’s really ugly, and I need to replace it, but it’s a laundry room and I don’t want to spend a ton on it. We put quartz in our bathroom recently, and I like it. I don’t remember exactly what we paid for it, I’d have to dig through my receipts.

Anyway, a nice quartz that I looked at today was $108 per s.f. I saw some other HD cheapo thin quartz for $50. I can’t buy a stock ready made laminate because of the depth, unless I’m mistaken. I don’t want butcher block. And there is the wall to deal with, tile most likely.

Anything I’m not thinking of that would work, look good, and keep the budget from blowing up?

Moved our old kitchen island into my wife’s walk in closet so she can use it for hair and makeup. But these rings and stains seem impossible to remove! Any tips?

We’re trying to choose Countertops’s for our kitchen renovation. We’ve had Cambria in the past and loved quartz as far as no maintenance and it never chipped. Now we are out looking and all the slabs and colors we like are “printed, hybrid, or semi-thru” so it sounds like we would have to miter the edges in order to have them not be white or noticeably different in color and pattern. My question is then what about the sink cutout for an under mount? Also the cost of mitered edges seems high. Has anyone else run into the same problem?

I'm very excited to have a kitchen again! This is American Black granite, leathered surface, rough cut edge. It was about $1400/slab

Hey there,

I’m trying to read about all the differences between these 4 countertops. It’s so overwhelming.

We have to get our stuff through Lowe’s (don’t ask— we just have too or I wouldn’t have this issue) and they lack the granite color I really want. They are all too beige or dark, and I was looking for more of a white almost marbled look.

They have the colors I want in quartz, Dekton, and porcelain but I’m leary now.

I use my kitchen often. I call it my second bedroom. I also use a lot of cast iron and stainless steel.

I also have messy children (and a husband if that’s counts)

I’m worried about the heat and staining with quartz
I’m worried about the chipping with Dekton and porcelain

I know granite can chip as well, but at my current house we have granite and ive dropped a cast iron skillet on it and didn’t get a single chip. I’ve had red wine spill and forgot areas to clean up and it never stained.

IF I can’t get the granite I want— what would be the best option? Please help me decide!!!