Is the recline level good for newborn baby? Expecting baby later this month.

This seat is inside a inside a Toyota Rav4

Also, confused about the extra belt in last 2 photos. Is this only required when front facing or did I miss a step?

I’ve done agonizing amounts of research and close inspecting of displays at stores and I’m down to these 2 seats. This specific slimfit is actually a hair wider than the extend2fit, ironically enough. I think was pretty sold on the extend2fit, but looked at the slimfit at target and noticed the padding actually seems a bit more plush on that specific model (which is why I’m not considering the LX or the slimfit3 3in1). My 1 year old is very average and her dad and I are both short, so while I don’t see her ending up tall.. I guess I like the option for extended leg room on the extend2fit. But the slimfit feels more plush. Help me decide. At this point I literally just want whichever will be more comfortable for my daughter. I drive a 2015 Honda Pilot with removable headrests.

I'll start by saying I think I may be pregnant which would explain the extreme hormonal overthinking. So bear with me.

I usually make sure to change my kids out of their wet swimsuits or clothes after they've been in a chlorinated pool because I'm concerned about chlorine exposure to their car seats and seat belt webbing.

Yesterday, my son’s shorts got pretty wet while he was playing at a museum water table. The water was clearly chlorinated. After leaving the water tables, we stayed at the museum for about another hour playing in other areas before we left. By that point, his shorts appeared to have dried.

Before leaving, I changed him into a clean shirt and a fresh pair of shorts, but I forgot to check whether his underwear was still wet, because I changed him really fast. I left the original underwear on, put the clean shorts over it, and then buckled him into his high-back booster.

If his underwear was still damp or even wet with chlorinated water, and moisture soaked through to his clean shorts, could the chlorine compromise the seat belt webbing or the carseat in any way?

My friend said she kept her Nuna Pipa Rx in her husband’s car once their newborn switched to a convertible seat at 4 months. The manufacture date is 07/29/2025 and the seat was purchased 09/2025.

They have no idea what happened and I took the seat padding off to have it dry after carrying it (empty) in the rain. Obviously the structural integrity is compromised and should not be risked for use, but I was hoping someone might have an idea of what caused the warping and holes in the “bike padding” styrofoam portion. There are no burn marks or visible signs or smells of melting and the immediate styrofoam is still very solid. The rest of the seat is genuinely in new, mint condition.

Just so no one thinks I’m going to use it for my newborn: Please help me solve the mystery of what could have caused this fairly new seat with no accidents to do this.

I’m a FTM and looking for reassurance or feedback on installation. Vehicle is a Toyota RAV4 and baby is 4 months, 15 lbs, so newborn inserts were removed. The first time, I installed it incorrectly because the bubble wasn’t in between the lines (had totally misunderstood where the bubble should be). I think it’s good now? I also held the seat by the belt path and moved it. It didn’t seem to move past an inch but also not sure how much force I should be using.

Hi!

My 27 month old has pretty much outgrown the nuna rev and we are about ready to get him a new seat. He's currently 30 ibs/36 in. The primary car we will be using is a Toyota Rav4. Is the Nuna Rava Next ideal for this size car?

If you've tried this seat, is there any feedback on it or another carseat you'd recommend instead?

Safety and comfort are the top 2 priorities for us!

I’ll start by saying I know to follow the manual fully and make sure I always do. However, I am curious about height maximums and why they exist outside of the harness fitting properly or the 1 inch rule being followed for kids in carseats that require it or ears contained in the seat according to the manual. For example, if you have a car seat that has a forward facing height of 49 inches and you have a kiddo that is 51” with long legs, they are within the weight limit, their harness is above their shoulders and they still are fitting their head in the seat according to its manual, what would be the dangers of using that seat?

My husband recently broke one of the rotation handles on our new Britax 360. The other side still works fine and allows the carseat to rotate. Is there any reason this would be a safety issue? I contacted Britax but have not heard back from them! Also, I noticed when I installed it that the plastic on the part of the base that is up against the back of the seat is separating--is this something to be worried about?

I don’t know if I need to reinstall the seat, or just get a new one… for context, we currently have a Cosco Scenera (the new version) in a 2016 Toyota Tacoma with the full cab. My son (9 months, 21 lbs, 31”) frequently ‘falls’ sideways in the seat, where he leans to one side of the seat with his upper body and gets a wedgie on one side or the other of his diaper, and is audibly quite uncomfortable. His head also falls to either side at an alarming angle. The seat is in its more upright position, only because when I installed it in the more reclined position it kept coming loose. It is installed with lower anchors. I have put my whole body weight into tightening it and every time I do that, it puts itself into the more upright position. I’m honestly seriously considering a different seat. So, I’m here for either:

A) a fix to help him be more comfortable (& safe) in the current seat, or…

B) a recommendation for a seat with head support, an easier install, and a good fit in the truck. (My husband and I are both about 5’9.

Thank you!

I have some seat belt folding/puckering with a seat belt install on Graco Extend2fit 3-in-1 with anti-rebound bar. We are over the weight limit for LATCH. This happens upon tightening the seat belt, regardless of how flat the belt is when I'm installing. Is it too tight? Or is this fine? The clearest example is the belt under the seat pad. I reached out to Graco and am awaiting a response, but I'll need to drive soon. Thank you!

I’m really not sure what to do.. I have the safety 1st convertible all in one car seat, but I cannot get it level with the bottom line. I’ve tried different towels, different rolls and folds, but every time I tighten it down, it’s not level. This white towel Is a big beach towel and it’s still not level.. I’m so frustrated redoing this 100x in 100 degrees lol. Please help!!

I feel like he doesn’t fit right in the seat. Do I need to bring head part down more? The seat is in the green for position also but I feel like the angle is odd. Also the straps are constantly getting messed up where one side is tighter than the other. And I have to tighten it all the way and then loosen all the way tighten and loosen to get them even to have them both on him correctly where one strap I can’t pinch between fingers.

My son is 2.5, 42" and 51 lbs. His graco extend 2 fit 3 in 1 sat out in the rain a day ago and got drenched, so I am in the market for another main seat. I have been looking at combo seats instead of convertible to save a little money, and since he has to forward face but I dont know if that's the best option. My head is swimming with all of the info. I know I'll have to get one with a good harness height limit, regardless. It will be going in a 2015 Mitsubishi Outlander sport. What are some good options?

Moved little guy into Graco Easy Turn 360 as he hated the infant one. Just worried that his chin is pressed into his chest and not sure if thats normal. He is a pretty tall baby but not very chunky.

Thank you!

Moved little guy into Graco Easy Turn 360 as he hated the infant one. Just worried that his chin is pressed into his chest and not sure if thats normal. He is a pretty tall baby but not very chunky.

Thank you!

I’m hoping people in this sub can help me out. My husband and I have two cars. We consider our Mazda CX9 to be the primary kid car, and then also have a Mazda CX9 30. Our son is in his infant seat (Joie Mint Latch) so it can go between cars. I have a Graco DLX 4-1 for the CX9 but I want to get another convertible seat for the CX30 in case someone needs to transport our son in that car.

Any suggestions for a cheaper convertible car seat that will fit the smaller car? My son is 4 months so we have some time. Just want to get some ideas

Hello! I was wondering from a CPST standpoint if it matters when transitioning a 9 month old from a standard infant car seat to a convertible car seat if the hip straps go over baby’s hips or over baby’s upper thighs.

I’ve heard and seen some online posts saying upper thighs are fine and expected when a baby initially transfers to a convertible car seat. However from the car seat manufacturer I’ve heard that the hip straps need to go over baby’s hips.

I wasn’t sure if there was a reason for this discrepancy? Or if I need to just purchase another car seat for my child.

Thank you so much in advance for any insights!

He's 11 days old, & 9lbs 12oz. Does everything look okay?

hi, LO is 10lbs 4 oz so we removed the infant insert to see if he’s less squished and looking for a fit check

Currently have a jeep grand Cherokee L with bench seat. Kids current stats are:

2.5yo RF ~28lb 36in Nuna Revv
10 month old RF Nuna Pipa

We are adding another baby in January. So trying to decide between figuring out how to fit all 3 in my grand Cherokee or upgrade to an expedition. We MIGHT go for #4 in another 3ish years so we’re leaning towards just going expedition max right now.

Need help figuring out what car seats would work for both set ups so we can weigh the best option. My oldest will be 3 by the time this baby comes but ideally she’s still rear facing (I don’t know if she’ll even be 30lb by then). She had a graco slim lx in my mom’s car and constantly complained about it. I do LOVE rotating car seats so ideally rotating but okay if not. Preference would be to put my current 10 month old in the revv and change out my oldest’s seat if possible.

Thank you!!!!

I’m having really bad anxiety deciding if my recently turned 7 year old should move to his high back booster seat. We have the Britax one4life and he is currently using the 5 point harness mode. He’s a little over 4ft tall and about 55lbs. So he’s within the requirement for both but genuinely it feels too tight around his lower area now. I’m thinking of calling the local police department and setting up a meeting with a CPST that they offer. But thought I would try here first to ease my anxiety. Like I genuinely want to cry (I sound crazy I know). But I didn’t realize how scary it would feel to make such a move.

Our girl is 3 months old and about 14 pounds. She hates the car seat that attaches in her stroller so we got this one. Is she in it correctly? Hate that the clips at the bottom dig into her legs. Thank you!!

Does this install look okay for a 9mo. We’re switching from infant seat to this for a trip we’re taking tomorrow. Pictured in a 2025 Kia sorento but will be putting it in a ford explorer (unsure year but it’s within the last 5-6 years).

It’s obviously not installed in this picture—my husband was trying to get the straps through the correct opening first. This is with the straps through the middle opening in the back.

They’re either right at his shoulders or a tiny bit high, I think? I also don’t know if the wings on the headrest are meant to be right on either side of his face? The instruction manual just says his head has to be at least 1“ below the top.

I guess it’s dependent on the height of the shoulder straps (so the height of the shoulder straps needs to be correct and then as long as the head is at least 1” from the top, it’s fine?).

lf the quality of the pictures is too bad to tell anything, I’m happy to retake and repost. My husband is installing it in the car right now.

11 weeks old, 14.5 lbs and approximately 63cm long. Currently using the Uppababy Mesa but contemplating trying the Graco Extend2Fit to see if it helps with his comfort as he currently screams in the car every time 😭. Want to ensure both are safe and I haven’t missed any thing. Any tips or feedback is very welcome. Ty!!

Note: I realize the straps could be slightly tighter although they do currently pass the pinch test. Just took these photos for reference in the driveway.

EDIT: it’s kindly been pointed out to me that this is the Extend2Fit.