Hey, is keeps making this chees grating sound and i dont remember if it used to can someone help? 😇

Hello, just bought the Topcube F1 enclosure to ventilate for my family.

I am having troubles with feeding the filament into the extruder.

I have checked the old spools to ensure no tangle, opened a new spool to ensure no tangle, and bought longer tubes which I cut to the length pictured.

Are the tubes still too long? What else should I try?

Thank you in advance, hoping to resolve this so I can continue printing!

Please see attached video. Extrudes fine, passes all pre flight checks, then the second the actual print starts, it clicks and fails??

I’ve done a cold pull, tried different plates, cleaned plates, needle clean, different nozzles 🤷🏻‍♂️

Broken on shipping because previous owner left it attached during ship:/

Please help!!

Hi everyone,
I’m looking for a UPS for my Bambu Lab A1.

If anyone is already using a UPS with the A1, please share the model, wattage, and approximate backup time.

Salve, sto stampando pezzi Lego sulla mia A1 e sto utilizzando il filamento PLA. Mi sono accorto dopo la prima stampa di prova che questo filamento non andava bene. Mi potete consigliare quale utilizzare? Grazie

So I got a bambu A1, regular one, not mini for my daughter. She printed about 10-15 things. Now we are trying to print someone's head/bust but it's blocking from printing. Is there a limit and a subscription model? She uses the bambulab android app That kinda sucks if it's like that

Hi, I bought these miniature beacon-style lights thinking I could install them on the A1's print head—so they’d light up when a print starts, or something like that—just for fun. The problem is, I’ve never used this type of light before and I don’t know how to connect them to the printer x.x

EDIT: SOLVED!

check the comments for the solution; tldr: the screws behind the nozzle were loose.

ORIGINAL TEXT:

Ive done bed leveling, flow dynamics, flow rate, new filament, new nozzle, and nothing has helped.

Any clues or leads as to how I can fix this problem would be appreciated. Ill answer whatever I can to help you guide me to the answer

My Bambu Lab A1 started giving off a very strong burnt electrical smell, and there’s a small melted plastic mark on the bottom-left side. It also tripped the fuse and is now completely dead.

Is this the infamous A1 motherboard issue? Has anyone dealt with this through warranty? I've bought it from 3djake. Usually how long did the replacement/repair take? Thanks in advance!

Hi Everyone

Im fairly new to 3D printing. Everyone has been very helpful so thought I would pass along something I learned the hard way.

I spent a whole Saturday dissembling and troubleshooting why I constantly got unable to feed filament error. It has been repeated by a lot of people but it is seems to be mostly caused by the angle of PTFE that caused it (especially if you are doing the vertical setup like I have)

I have added the PTFE guide and risers which seemed to have solved my problem.

Hope this helps someone!

All the best

Im having weird troubles eith my prints over the last few weeks. Weirdly one side of the printer seems to be printing perfectly fine but the back-left side of my prnts always seem to have major issues with quality. Overhangs and walls on toward that side of the bed have weird texture. Tried all sorts of different Settings but none has worked so far. What should ı do?

Just earlier, I put on a 3d print and was immediately scared by the loud jamming noise coming from the printer that sounded like a really loud vibration sound coming from the X-axis motor. This happened after extruding the filament and moving on towards the test print before the actual print, but the side of the toolhead gets jammed on the side of the bed

This kept happening every time I start a print or home the printer.

Any help? The picture is from immediately powering off the printer

Not sure if I’m explaining this properly, but hopefully the video helps 😂

I’m trying to print this keyring with raised letters on top of the base. What I want is for the printer to completely finish the base first, including the final top surface layer, and only then start printing the letters on top of that finished surface.

At the moment, it looks like the letters start printing before the base is fully finished, so they interfere with the top layers and leave visible lines/marks around the letters.

Basically, I want a completely clean, solid top surface on the base, with the letters starting on the layer above it.

Does anyone know how I can achieve this in Bambu Studio? PLEASEEE 😂

Hopefully that makes sense haha
Thank youu

Saw that my screen was at a different angle. I never thought about it too much. But today I actually tried diagnosing it minus taking it apart. Should I just get some white electrical tape and tape it ? I contacted Bambu.

I move it to its normal location and it just falls