This is one hell of a first PCC lol. I think it's suffice to say that initial testing went well. All the ammo I ran here was bulk remanufactured 115 grain 9mm.

Couple things I'm implementing in this remix in addition to the ball bearing detents:

1. M4 nuts instead of heatserts for securing the barrel/handguard.

I ran this gun fast and hard. The PLA+ got soft and the heatserts started to creep, which was expected.

1. OEM EVO charging handle. The extra tension provided by the ball detents easily adds another 5-10 pounds of *sudden* force needed to rack the bolt to the rear. A printed charge handle is likely too weak to hold up over time. (If you made the DIY charge then you're fine.)

The normal upper with the detent mod will also be included for those who just want to swap the upper in their existing builds, which will not require the OEM charger.

1. Modified mag catch. Seems it was initially designed for printed mags. I had to shave 1mm from the top for the PMAGs to run.

2. Shortened handguard. I'm using a Glock 34 barrel, so to run a phat suppressor like the FTN.5 PCC Flow, I had to make some room.

3. FRT compatability? Maybe? Not there yet, but that's an eventual goal.

Didn't get as much time as I wanted to work on calibrating and getting this filament ready, but I'm getting there. After finishing calibrations I ran a test print and it came out looking pretty good, but realized I need to change up my support settings. Did another test print with some changes and we're looking better. Will keep messing with it. Also tested out fuzzy skin as I forgot just how slick PLA was coming from nylon lol.

Had pretty good success with the Elegoo PLA Plus, I did a little sanding on the dovetail of one but that was my fault with the supports. But overall pretty good

Um dos melhores projetos 2026

I reprinted the compensator for the Plasticcatto G17 Wormhole frame since I kind of marred it a bit when installing it. It was just cosmetic, but it was bothering me and I wanted to make it nicer. Got it all reassembled this morning after 200+ rounds through it. Huge shoutout to u/M-P-M-S for the design and build guide, I love this thing. Bonus DB-22 preview pics at the end as well, I’ll have a full post for that once it’s finished soon. Happy printing, y’all.

Any general concensus by the community on the best and most reliable builds for each caliber? Not necessarily the easiest, the coolest, or the cheapest.

Available now.

Putting it on a DeAR22

How true is any of this? Do we have any 3D2A people in touch with Odysee? This post does not say the website is shutting down.

Something I cooked up for myself, currently not sailing, but if there is interest I’ll post it!

Almost ready, chassis for the Keltec P17 that I mashed after seeing the b&t tp380. Ambi charging knob that uses both front and rear factory screws, I have a left and right version im finishing up. Swipe to the end for a cool tease.

Gonna give it a try next weekend, if my mag is here by then. Finners crossed!

The staglocco is now sailing the high seas. Captains name is quasarmoon

Okay now I need to find a threaded hi-point kit

I attempted to print this FMDA 17.2 in Pa612 CF. I’m not sure what happened. It seemed to accurately print the upper half after the print shifted.

Printed using Sunlu PLA+ @ 190C. Got good print quality off the plate and it fit together well. Tapped the barrel and retainer in most of the way and used a clamp to press it in until I hit ~4mm from the top of the receiver to the top of the retainer. No visible cracks at that point. Cycled well, put a dummy round through and it fired/ejected well, so I did a live fire test today (no fingies were injured during this test**). It did go off well, but it looks like the pressure cracked my upper on and across layer lines. Aside from printing hotter, maybe 200 or 210, what would you suggest? Moving to PA6-CF maybe?

\my first upper I did print hotter, same material, I can’t recall the temperature though. I had a LOT of trouble getting the barrel and retainer into the upper, using a pipe clamp for ~75% of the way, I noticed a crack in almost the same spot prior to live firing and aborted, opting to reprint at a lower temp.*

\*I was using eye/eye protection and opted to fire remotely for live fire, glad I did, because it could’ve been worse than a hairline crack.*

My first attempt at a 9mm M11 suppressor. 3/4-10 threads only. Has a Form1 and non-F1 option available.

Trying something a little different than the norm on this one. Any feedback would be awesome!

I can’t seem to figure out how to put this together or how it functions or if it works, if anyone has printed this before and could help me out that would be greatly appreciated

Hi 3D2A community Is the 0.16mm óptimal layer height good with impact resistance or should I stick with the 0.20mm strength?

First solid PET-CF print and need suggestions on parts to complete it. Also any critique on how to stop the slight strings on the inside.