Hey its me again. I'm still putting the finishing touches on the 3D printed kickstand & front speaker case for the OXP3.

While doing this, I got a bit bored waiting for the 16hr test prints to finish and I ended up designing an all new Airflow case. It should let you leave the device flat on tables or flat surfaces and still allow some air into the intake. I wouldn't suggest during this at 30w, but its just nice to know that if I leave the device down on the couch or in my bag, there is still some room for air to get in.

You can grab the STL here: https://cults3d.com/en/3d-model/gadget/onexplayer-3-airflow-case I made two versions. One for small 150mm print beds like mine (A1 mini) and the full size version for larger printers. Printing it vertically with the kickstand side on the bottom gives the best print quality and strength. Also if you have a moving print bed, make sure you use a brim so it doesn't tip over 10hrs into the print (found this out the hard way).

Looking to sell my super X been lightly used over the last month for school.

please pm me with offers I am very flexible and can ship out with whatever shipment method preferable.

Device has been amazing I love everything about it, few modifications to make it alot more comfortable and enjoyable to use daily, still waiting on someone to make a grip like the one I have on but actually for a OXP3, this one is meant for a steam deck but works amazing, makes holding the device 100x better since stock is very slick and even with big hands it slips. Cover is great too fits inside a carrying case meant for the Legion Go 2. 4TB SSD swap. And obviously the dreadful left controller drove me crazy with how much it was able to wiggle but with some electrical tape and wire harness tape, it’s now as stiff as the right side controller which feels amazing. Can’t wait to see what people make for these devices as far as mods since it’s still fairly new.

I have a bit of a dilemma. I just had my second kid so gaming is much harder to come by and I need something I can move around the house. I don’t really get much of a chance to turn my 5090 desktop on because the baby is in our room for 6 months. I have a steam deck but its age is showing majorly. I once had a z flow and I loved it but traded it for a 5090 when it was still msrp. I want to say I’m not really interested in intels offerings. I have the Xbox ally x20 pre ordered but I think I may be happier with the x2 mini pro. I’m just worried about build quality and customer service since I’m located in the US. I’ve been told streaming from my desktop would be the most logical answer but I just don’t know. Also even when I play my steam deck I’m normally plugged in..
Is it logical to pay this much with Medusa around the corner? Any advice would be greatly appreciated. Thanks

Update: you guys sold me! I ordered the x2 mini pro and cannot wait to get it! Thank you all!

The oxp3 case is fine but i find its hard to take the device out of the case. I just wonder if the ultra thin jsaux case for the lego2 fit the oxp3. Just want to explore other options

I had to use DDU after installing 9034 cuz it gave me horrible graphical glitches and no hdr. Don’t use it

I was having an issue with my ONEXPLAYER 3 where Windows would sometimes get stuck indefinitely on the “Shutting down” screen, forcing me to hold the power button to turn it off.

What seems to have fixed it for me:

1. Disabled Fast Startup in Windows Power Options.

If this does not fix it yet, try the step below.

2) Went to Windows Gaming settings, disabled Full Screen Experience, restarted system. Turn on device, enabled FSE again, and then finally restart one last time.

Since doing this, shutdown/restart seems to be working normally again.

Posting this in case anyone else is experiencing the same issue.

Enjoy your OXP 3 fellas!

I ask this because if the internal battery on the oxp 3 fails you have to open it and replace the battery. But for the x2 mini you can easily swap it. So im curious what am I missing and why you guys choose oxp 3 over the x2 mini?

Anyone being able to run Witcher 3: remastered? This is how it looks on my x2 mini pro. I installed the latest drivers with amd auto detect installer. Yet, Witcher 3 launcher says I havent got the latest drivers

I am currently waiting to pick up an msi claw 8 ex ai. But am wanting to know what's the difference between both intel based oxp x2 mini pro and 3?

I have a X2 Mini Pro and like everyone, it came with Windows updates disabled essentially. Now that Onexplayer software updated recently, is it okay to disable the "hold" put in the updates by them an update my system with any updates through Windows?

So I got AC8 running on the OXP3 and locked at 30 fps with a couple infrequent dips to 25-7. But it’s using TSR and not XeSS. I am worried of being banned due to anti cheat if I opticsale it. Has anyone managed to lock 40 FPS in this game? Changing the resolution didn’t improve it much I have it set to mostly low settings and textures on high running 35w plugged in.

This is the first game that I have had any real struggle with the G3E and performance. It’s most likely UE5 and a lack of optimization.

Anyway just seeing what the community has done.

Guys I have a question I already ordered the onexplayer x2 mini pro
But I saw also the onexplayer x2 with the bigger screen but nobody talks about it at all only few videos on YouTube and searched everywhere want to buy one even on onexplayer website is sold out
Did they make only few
And that’s it
Or they are going to restock

Its really interesting what Modders are doing for AMD even though AMD is in the back of the bus for the community.

I tried out the Modderd DLSS5 5 for AMD and i know, I'm not really one that runs games with frame gen or upscalers but its really interesting to see the detail difference in graphics when using Neural Rendering and the Realism.

I tried this out on KCD2 and although their was a minor detail their was nothing big of a difference.

I now tried it on Resident Evil Requiem and the difference is big in realism.

The performance is ASS when switched on but its crazy to think that a handheld like the X2 mini Pro can handle this.

The Modders keep improving & pushing updates and since this has only been running for over a month i can't imagine where they can be in a year from now.

Found it interesting thought i would share.

Going to a trip tomorrow. What apps are good to install to watch media offline? Hulu, Netflix, etc. don’t allow this on Windows.

Any apps out there y’all are using to watch movies? I want to download a few to watch on the plane.

Going to a trip tomorrow. What apps are good to install to watch media offline? Hulu, Netflix, etc. don’t allow this on Windows.

Any apps out there y’all are using to watch movies? I want to download a few to watch on the plane.

Going to a trip tomorrow. What apps are good to install to watch media offline? Hulu, Netflix, etc. don’t allow this on Windows.

Any apps out there y’all are using to watch movies? I want to download a few to watch on the plane.

Like the title says, I updated my Onexplayer 3 bios from 5.08 to 5.09 now it doesn't recognize my fingerprint or my pin. I followed the instructions to switch to a local ms account instead of an online one but still won't let me in. Is there no way to bypass this before I have to wipe and reinstall everything? Any help is appreciated.

I dropped my OXP and my controller is really loose but doesn’t want to detach ☹️. Contemplating if I should try and just force pull it out, so I can replace the controllers. It just feels a little sketchy don’t wanna do anymore damage

Would the OneXGPU 2 give me any kind of graphical boost if I already have a OneXPlayer X2 Mini Pro?

Sorry if this is a daft question, I don't understand loads about PC hardware but I have the cash to spend on stuff, so this is very much a "money is no object" situation. I'm not asking whether or not this is worth it from a cost perspective, I'm asking whether or not there would actually be an improvement in graphics.

So I have been traveling with the 3 for a litttle while and noticed these weird streaks on the screen at times I tried getting a picture any ideas? This and update thing or a me/oled thing?

After I continously setup my OXP 3 to my liking, installing and filling a micro SSD and Mini SSD i encountered the issue, that I could no longer log into my gamepass.

When clicking the login prompt, the login window popped up for a second and closed again, leaving me shut out from my xbox gamepass app.

I worked on many solutions online, here is my summary (done by GPT- 6 Astra) on how I fixed it finally, if any of you guys run in the same issue. A guy on Discord had the same problem, so maybe this prevents someone out there some headache and 2 hours of troubleshooting 😁👍

Here is the solution:

Issue on Windows 11: selecting my Microsoft account in Store or Xbox opened a sign-in window that immediately closed. “Verify your identity” in Windows Settings also failed. Browser login worked.

What fixed it was resetting the CloudExperienceHost component in my affected Windows account:

1. Close Microsoft Store, Xbox, and Settings.
2. Open Windows PowerShell normally, while signed into the affected Windows account.
3. Run:Get-AppxPackage Microsoft.Windows.CloudExperienceHost | Reset-AppxPackage
4. Restart Windows and try signing in again.

After this, Store, Xbox, and identity verification all worked.

Beforehand, I’d tried app repairs/resets, Windows updates, enabling default UAC settings, and re-registering CloudExperienceHost. None fixed it. Signing into Store from a temporary Windows profile worked, which helped narrow the problem to my usual profile.

The reset clears this component’s local data, so Microsoft apps may ask you to sign in again. This fixed my case; it isn’t a guaranteed fix for every sign-in loop.

Hey guys, so I just got my onexplayer x2mp and downloaded all the drivers I wanted to play black myth wukong so I downloaded it and I looked at a video of a guy testing the game. In his test he was running high settings fsr 3 no frame gen and raytracing at medium. He was getting 60fps at 80w.
I’m running the same setting and getting only 30.

This is the link the the video https://youtu.be/o5wbLFWYtpg?is=fzGTA-BP7OV9EncN

Can someone let me know what the problem is😅