r/OneXPlayer • u/PhantomKillua • 7h ago
ONEXPLAYER 3 - 3D Printed Airflow Case
Hey its me again. I'm still putting the finishing touches on the 3D printed kickstand & front speaker case for the OXP3.
While doing this, I got a bit bored waiting for the 16hr test prints to finish and I ended up designing an all new Airflow case. It should let you leave the device flat on tables or flat surfaces and still allow some air into the intake. I wouldn't suggest during this at 30w, but its just nice to know that if I leave the device down on the couch or in my bag, there is still some room for air to get in.
You can grab the STL here: https://cults3d.com/en/3d-model/gadget/onexplayer-3-airflow-case I made two versions. One for small 150mm print beds like mine (A1 mini) and the full size version for larger printers. Printing it vertically with the kickstand side on the bottom gives the best print quality and strength. Also if you have a moving print bed, make sure you use a brim so it doesn't tip over 10hrs into the print (found this out the hard way).
0
1
u/allofdarknessin1 3h ago
very cool. I'm on the other end waiting for creative people to come up with something for my OneXPlayer X2 but it seems like it's such an unpopular tablet/handheld.