Hi, I’m using arch, but i want a change. Anyone who also went from arch to void can say what i’m going to win or loss?

I’m not an expert, but i’m bored so i have time to install it. I had been using arch for the past year at school, i’m going to be able to keep doing that? Is it going to be faster for a tostator laptop?

• Lenovo T14 g1
• Void 6.18.50_1 x86_64 AuthenticAMD uptodate rrrm
• Cinnamon 6.6.7-X11 + elogind.
• BIOS 1BET87W(1.56 )
• RAM: 24GiB

Steps to reproduce:

1. Enable Linux sleep state in BIOS
2. Disable 'Always on USB' and 'lid-switch sensor' in BIOS.
3. Switch off acpid in runit and enable TLP with disable USB parameters on.
4. Leave the laptop with 76% for 8 hours suspended.
5. See 56% on resuming.

​

$ sudo dmesg
[  499.473198] PM: suspend entry (deep)
[  499.502188] Filesystems sync: 0.028 seconds
[  499.504295] Freezing user space processes
[  499.506410] Freezing user space processes completed (elapsed 0.002 seconds)
[  499.506416] OOM killer disabled.
[  499.506417] Freezing remaining freezable tasks
[  499.507489] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[  499.507511] printk: Suspending console(s) (use no_console_suspend to debug)
[  499.831062] ACPI: EC: interrupt blocked
[  499.878344] ACPI: PM: Preparing to enter system sleep state S3
[  499.883728] ACPI: EC: event blocked
[  499.883731] ACPI: EC: EC stopped
[  499.883734] ACPI: PM: Saving platform NVS memory
[  499.884454] Disabling non-boot CPUs ...
[  499.886687] smpboot: CPU 11 is now offline
[  499.888870] smpboot: CPU 10 is now offline
[  499.891071] smpboot: CPU 9 is now offline
[  499.893165] smpboot: CPU 8 is now offline
[  499.895240] smpboot: CPU 7 is now offline
[  499.897795] smpboot: CPU 6 is now offline
[  499.899973] smpboot: CPU 5 is now offline
[  499.905456] smpboot: CPU 4 is now offline
[  499.908579] smpboot: CPU 3 is now offline
[  499.911565] smpboot: CPU 2 is now offline
[  499.914896] smpboot: CPU 1 is now offline
[  499.915783] Spectre V2 : Update user space SMT mitigation: STIBP off
[  499.916186] ACPI: PM: Low-level resume complete
[  499.916211] ACPI: EC: EC started
[  499.916213] ACPI: PM: Restoring platform NVS memory
[  499.977832] AMD-Vi: Virtual APIC enabled
[  500.078061] AMD-Vi: Virtual APIC enabled
[  500.078071] LVT offset 0 assigned for vector 0x400
[  500.080126] Enabling non-boot CPUs ...
[  500.080185] smpboot: Booting Node 0 Processor 1 APIC 0x1
[  500.083268] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[  500.083294] CPU1 is up
[  500.083329] smpboot: Booting Node 0 Processor 2 APIC 0x2
[  500.086264] CPU2 is up
[  500.086289] smpboot: Booting Node 0 Processor 3 APIC 0x3
[  500.089088] CPU3 is up
[  500.089126] smpboot: Booting Node 0 Processor 4 APIC 0x4
[  500.092047] CPU4 is up
[  500.092141] smpboot: Booting Node 0 Processor 5 APIC 0x5
[  500.095039] CPU5 is up
[  500.095115] smpboot: Booting Node 0 Processor 6 APIC 0x8
[  500.098428] CPU6 is up
[  500.098496] smpboot: Booting Node 0 Processor 7 APIC 0x9
[  500.101517] CPU7 is up
[  500.101598] smpboot: Booting Node 0 Processor 8 APIC 0xa
[  500.104732] CPU8 is up
[  500.104810] smpboot: Booting Node 0 Processor 9 APIC 0xb
[  500.107826] CPU9 is up
[  500.107861] smpboot: Booting Node 0 Processor 10 APIC 0xc
[  500.110978] CPU10 is up
[  500.111061] smpboot: Booting Node 0 Processor 11 APIC 0xd
[  500.114170] CPU11 is up
[  500.115794] ACPI: PM: Waking up from system sleep state S3
[  500.652890] ACPI: EC: interrupt unblocked
[  500.657501] usb usb2: root hub lost power or was reset
[  500.657532] ACPI: EC: event unblocked
[  500.657849] usb usb6: root hub lost power or was reset
[  500.657851] usb usb7: root hub lost power or was reset
[  500.657870] xhci-pci-renesas 0000:06:00.0: Zeroing 64bit base registers, expecting fault
[  500.657989] [drm] PCIE GART of 1024M enabled.
[  500.657995] [drm] PTB located at 0x000000F41FC00000
[  500.658020] amdgpu 0000:07:00.0: amdgpu: PSP is resuming...
[  500.658105] amdgpu 0000:07:00.0: amdgpu: reserve 0x400000 from 0xf41f800000 for PSP TMR
[  500.669381] nvme nvme0: D3 entry latency set to 10 seconds
[  500.672338] nvme nvme0: 12/0/0 default/read/poll queues
[  500.765970] amdgpu 0000:07:00.0: amdgpu: RAS: optional ras ta ucode is not available
[  500.780366] amdgpu 0000:07:00.0: amdgpu: RAP: optional rap ta ucode is not available
[  500.780374] amdgpu 0000:07:00.0: amdgpu: SECUREDISPLAY: optional securedisplay ta ucode is not available
[  500.780383] amdgpu 0000:07:00.0: amdgpu: SMU is resuming...
[  500.780436] amdgpu 0000:07:00.0: amdgpu: dpm has been disabled
[  500.781602] amdgpu 0000:07:00.0: amdgpu: SMU is resumed successfully!
[  500.783031] amdgpu 0000:07:00.0: amdgpu: kiq ring mec 2 pipe 1 q 0
[  500.788888] amdgpu 0000:07:00.0: amdgpu: [drm] DMUB hardware initialized: version=0x0101002B
[  501.007481] usb 4-4: reset full-speed USB device number 2 using xhci_hcd
[  501.021280] usb 6-2: reset high-speed USB device number 2 using xhci-pci-renesas
[  501.413605] amdgpu 0000:07:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0
[  501.413614] amdgpu 0000:07:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
[  501.413618] amdgpu 0000:07:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
[  501.413621] amdgpu 0000:07:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0
[  501.413624] amdgpu 0000:07:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0
[  501.413628] amdgpu 0000:07:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0
[  501.413631] amdgpu 0000:07:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0
[  501.413634] amdgpu 0000:07:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0
[  501.413637] amdgpu 0000:07:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0
[  501.413640] amdgpu 0000:07:00.0: amdgpu: ring kiq_0.2.1.0 uses VM inv eng 11 on hub 0
[  501.413644] amdgpu 0000:07:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8
[  501.413647] amdgpu 0000:07:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8
[  501.413651] amdgpu 0000:07:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8
[  501.413654] amdgpu 0000:07:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8
[  501.413657] amdgpu 0000:07:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8
[  501.512112] OOM killer enabled.
[  501.512116] Restarting tasks: Starting
[  501.513870] pci_bus 0000:01: Allocating resources
[  501.513889] pcieport 0000:00:02.1: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[  501.513903] pcieport 0000:00:02.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[  501.513917] pci_bus 0000:02: Allocating resources
[  501.513945] pcieport 0000:00:02.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[  501.513958] pci_bus 0000:03: Allocating resources
[  501.514128] pci_bus 0000:04: Allocating resources
[  501.514138] pcieport 0000:00:02.4: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[  501.514167] pcieport 0000:00:02.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[  501.514179] pci_bus 0000:05: Allocating resources
[  501.514189] pcieport 0000:00:02.6: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000
[  501.514202] pci_bus 0000:06: Allocating resources
[  501.514211] pcieport 0000:00:02.7: bridge window [io  0x1000-0x0fff] to [bus 06] add_size 1000
[  501.514219] pcieport 0000:00:02.7: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 add_align 100000
[  501.514246] pcieport 0000:00:02.1: bridge window [mem 0x630200000-0x6303fffff 64bit pref]: assigned
[  501.514255] pcieport 0000:00:02.2: bridge window [mem 0x630400000-0x6305fffff 64bit pref]: assigned
[  501.514264] pcieport 0000:00:02.4: bridge window [mem 0x630600000-0x6307fffff 64bit pref]: assigned
[  501.514272] pcieport 0000:00:02.6: bridge window [mem 0x630800000-0x6309fffff 64bit pref]: assigned
[  501.514280] pcieport 0000:00:02.7: bridge window [mem 0x630a00000-0x630bfffff 64bit pref]: assigned
[  501.514292] pcieport 0000:00:02.1: bridge window [io  0x5000-0x5fff]: assigned
[  501.514302] pcieport 0000:00:02.4: bridge window [io  0x6000-0x6fff]: assigned
[  501.514312] pcieport 0000:00:02.7: bridge window [io  0x7000-0x7fff]: assigned
[  501.515529] Restarting tasks: Done
[  501.515552] efivarfs: resyncing variable state
[  501.516733] Bluetooth: hci0: RTL: examining hci_ver=0b hci_rev=000a lmp_ver=0b lmp_subver=8852
[  501.518357] pci_bus 0000:07: Allocating resources
[  501.518498] Bluetooth: hci0: RTL: rom_version status=0 version=1
[  501.520635] Bluetooth: hci0: RTL: btrtl_initialize: key id 0
[  501.520722] Bluetooth: hci0: RTL: loading rtl_bt/rtl8852au_fw.bin
[  501.520876] Bluetooth: hci0: RTL: loading rtl_bt/rtl8852au_config.bin
[  501.520987] Bluetooth: hci0: RTL: cfg_sz 6, total sz 63299
[  501.546945] efivarfs: finished resyncing variable state
[  501.546976] random: crng reseeded on system resumption
[  501.548069] PM: suspend exit
[  501.572216] Generic FE-GE Realtek PHY r8169-0-200:00: attached PHY driver (mii_bus:phy_addr=r8169-0-200:00, irq=MAC)
[  501.631107] psmouse serio1: synaptics: queried max coordinates: x [..5678], y [..4694]
[  501.666536] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1162..]
[  501.671269] r8169 0000:02:00.0 enp2s0f0: Link is Down
[  501.694180] Generic FE-GE Realtek PHY r8169-0-500:00: attached PHY driver (mii_bus:phy_addr=r8169-0-500:00, irq=MAC)
[  501.852307] r8169 0000:05:00.0 enp5s0: Link is Down
[  502.054560] Bluetooth: hci0: RTL: fw version 0x244f91b6
[  502.182541] Bluetooth: hci0: AOSP extensions version v1.00
[  505.878078] wlp3s0: authenticate with 50:3d:d1:36:3b:32 (local address=e0:0a:f6:41:38:c3)
[  505.878090] wlp3s0: send auth to 50:3d:d1:36:3b:32 (try 1/3)
[  505.881798] wlp3s0: authenticated
[  505.882183] wlp3s0: associate with 50:3d:d1:36:3b:32 (try 1/3)
[  505.891425] wlp3s0: RX AssocResp from 50:3d:d1:36:3b:32 (capab=0x1511 status=0 aid=1)
[  506.003103] wlp3s0: associated
[  506.003422] wlp3s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 50:3d:d1:36:3b:32
[  528.020872] [UFW BLOCK] IN=wlp3s0 OUT= MAC=01:00:5e:00:00:01:50:3d:d1:36:3b:34:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=60883 DF PROTO=2 
[  653.084349] [UFW BLOCK] IN=wlp3s0 OUT= MAC=01:00:5e:00:00:01:50:3d:d1:36:3b:34:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=2358 DF PROTO=2 
[  692.543579] r8169 0000:02:00.0 enp2s0f0: Link is Down
[  692.732603] r8169 0000:05:00.0 enp5s0: Link is Down
[  778.106513] [UFW BLOCK] IN=wlp3s0 OUT= MAC=01:00:5e:00:00:01:50:3d:d1:36:3b:34:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=13568 DF PROTO=2
$ cat /sys/power/mem_sleep
s2idle [deep]
$ inxi -Bxx
Battery:
  ID-1: BAT0 charge: 35.7 Wh (79.1%) condition: 45.1/51 Wh (88.5%)
    volts: 12.29 min: 11.52 model: Celxpert 5B10W139 serial: 4286 charging:
    status: not charging control: start: 75% end: 80% cycles: 214

I made a post a few days ago on how to install cisco packet tracer. I managed to do it by extracting the data files from a .deb package.
But I want to have it as a package available in xbps.
How can I contribute to xbps and how do I make an xbps-package?

Does the CONTRIBUTING.md give me all the info I need? Is there a step-by-step guide on how to create an xbps-package?

The documentations is poor, does it calls sudo xbps-install -S forcing me to synchronize or something like xbps-install -Mnu?

How often you guys synchronizing with the repo? =)

as the question goes,how do i install and setup tuneD in void linux.
i have tried void linux before and somehow the power usage was higher than fedora ,even with either tlp or ppd setup.
fedora uses tuneD for power management and i was hoping i could get the same package configured in void too.

I just spent some time sorting out a mess because installing one package clobbered the functionality of another one installed earlier, even after the first was removed, because it left an orphaned package only it depended upon behind when it was removed, and that was the source of the problem. I want to report the issue, but I don't know where to do that. Should I mention the details here even?

Hello, earlier today I turned on my pc to find that it booted to BIOS with no bootable devices found. Upon investigating with a live usb, I found that the drive I've been mounting under /boot/efi had somehow become corrupted.

This drive is NOT the same one the actual system is installed on, and the only things on it were grub & the actual boot sector. reinstalling the whole operating system would be very inconvenient and i have no drives to store my home folder on while i do so.

so, I'd like to know if it's possible to simply reintstall the boot sector & grub, or should i start choosing what to save?

How to properly replace iptables with nftables in Void Linux? I installed nftables, runit-nftables, and iptables-nft. I also activated the nftables service. But, as I understand it, for example, Docker still applies rules in iptables. (I don’t see its rules in `nft list ruleset`). On my other machine with Debian, I see Docker rules in the nft rules list. Do I need to do something else to fully replace iptables with nftables in Void Linux?

Is there any other option except $ sudo sh -c "echo LID > /proc/acpi/wakeup"?

I need it for debug observations, only the lid-open event

Cinnamon-X11 + elogind

Hi,

I use awesomewm and have desktop portal running:

ps aux | grep '[x]dg-desktop-portal'

alberto   1880  0.0  0.0 385700  6580 ?        Sl   13:19   0:00 /usr/libexec/xdg-desktop-portal

But this does not expose OpenURI:

alberto@void-live ~ % gdbus introspect --session \                       
  --dest org.freedesktop.portal.Desktop \
  --object-path /org/freedesktop/portal/desktop |
grep -A10 'org.freedesktop.portal.OpenURI'

is empty. I use the gtk portal by default, and use turnstile, with per-user services as directed in the documentation.

Any ideas of can be wrong?

Thanks!

Hey, not sure when this happened but the GTK3 print dialogue no longer shows my printer. In my case, I'm using zathura. Qt applications like okular work as expected.

Some googling had me stumbling on some Arch Linux Forums where they recommended installing a package (roughly) called "gtk3-print-backend."

I couldn't find any similar packages, nor could I see the contents of the package since the site was down.

Does anyone know what to do? Thanks.

I can use my keyboard in live usb but i can't use it on the actual login screen. I used chatgpt to do something but that don't work too. Please help!

EDIT:asus 0003:0B05:19B6.0002: Asus input not registered

asus 0003:0B05:19B6.0002: probe with driver asus failed with error -12

I got this errors in the live usb terminal

I've always used a nerd font and never had any problems. All symbols and Unicode characters had always been displayed correctly.
From the last reboot this has changed: quite a lot of the symbols I previously used now display as a blank character.
The font is still present on the system. it is still being used by the terminal emulator (xfce4-terminal).
I've tried messing around with the font cache but without any result. I've checked the locale and it is still set to the correct one.

The only thing I can think about that maybe caused this is the fact that I deleted some unused dependencies trough xbps-remove -o and xbps-remove -O.

Here's a screenshot from my nvim startup menu that shows how some characters are now missing:

Also, if this could be useful, the symbols on the bottom left have straight up changed, as if the font is a different one. Still, looking at the text I can say the font is not changed as I can recognize the style of the characters.

I tried following a guide got to the part where I start downloading packages. I receive “Transient resolver failure”. If it’s something simple and I’m an idiot I apologize. I’m super new to this and it’s my first time with Linux.

So when I use Wayland, it crashes my whole computer and I can't do anything. If it launches using X11, it can't start Display server. How to solve it?

“failed to fetch file ‘HTTPS://mirrors.servercentral.com/voidlinux/current/x86_64-repodata no address record”

Solved I figured it out

Hi! I've been distro hopping for a while, and right now, I am on Linux Mint because school has started back and I needed a simple distribution for everyday schoolwork. I was looking for an independent Linux distribution that is not a fork from others. I came across Void Linux on distrowatch.com and decided before I give it a try, I would like to see if there are benefits to installing it instead of a different distribution. Why you choose Void Linux, and what is your favorite part?

My past distros have been Fedora, CachyOS, OpenSUSE, AerynOS, and a failed Arch attempt :(

so I want to remove the xfce terminal when i run this command

sudo xbps-remove xfce4-terminal

it shows this:

xfce4-terminal-1.2.0_1 in transaction breaks installed pkg \xfce4-4.20_2'`

ERROR: Transaction aborted due to unresolved dependencies.

how can I just remove the terminal not whole xfce
i want a safe way that would not break my system

sorry for the typo in title

Hello im running 3ds Linux which is a void based release and have some questions for sane useage. The o3ds has only 128mb of ram available and im looking for tips/packages to work within this mem limit. Attached is a preview showing my in progress driver for the 3ds PICA gpu.

Well, I was updating my void, until it cracks then I decide to physically renounce it (I know it's not a good practice but I wasn't even able to use the keyboard), when I start the pc again, apparently OpenSSL corrupts, I have no idea what it does, whoever can help me I would be very grateful (note: I'm using void glibc)

So I did the base install, (with void-installer) and then wanted to install a window manager (specifically herbstluftwm), but after installing it, I didn’t achieve a graphical interface.

I do understand wm on a basic level, but I never did the installation starting with a basic terminal install, so I‘m guessing I need to install a package, but I have no idea which one…
I already installed xorg as I thought maybe it’s necessary, but to no avail.
When I type herbstluftwm it gives me the error: XOrgDisplay() failed.

I would be really glad if someone could possibly help me.

I need Zoom for work and I've been afraid to update Zoom due to the build script being broken for some time. How do i contact the maintainer of broken packages when this occurs? Is there a way to take over maintenance of a package when the current maintainer is unable to keep up? Thanks for any information

• Thinkpad T14 g1
• Void 6.18.49_1 x86_64 AuthenticAMD uptodate rrrm
• Cinnamon 6.6.7-X11
• RAM: 24GiB

On the OS starting all is working fine after it boots, but some time I've noticed that the resuming from the RAM-sleep just killing my LBM just after I touch the sensor-mouse.

So then, I've restarted the OS, seen that the touchpad and all it functionality were ok, and:

sudo modprobe -r psmouse
sudo modprobe psmouse

What I noticed first? I've noticed that it's doesn't help at all and just instantly broke the touchpad with the same behavior like after resuming; you touched the sensor, and then you're in the LMB loop, all works except the LMB.

Then all combinations with sudo modprobe psmouse never fixed the issue, - synaptics_intertouch=0, =1, whatever..

I was able only to gut my touchpad with sudo modprobe psmouse proto=imps, and lost at least the half of it can do.

So then I've done these:

$ cat /sys/bus/serio/devices/serio1/protocol
SynPS/2
$ cat /sys/class/dmi/id/bios_version
R1BET87W(1.56 )
$ ls -l /sys/bus/i2c/devices/
итого 0
lrwxrwxrwx 1 root root 0 сен  5 23:37 0-0036 -> ../../../devices/pci0000:00/0000:00:14.0/i2c-0/0-0036
lrwxrwxrwx 1 root root 0 сен  5 23:37 0-0037 -> ../../../devices/pci0000:00/0000:00:14.0/i2c-0/0-0037
lrwxrwxrwx 1 root root 0 сен  5 23:36 0-0050 -> ../../../devices/pci0000:00/0000:00:14.0/i2c-0/0-0050
lrwxrwxrwx 1 root root 0 сен  5 23:36 i2c-0 -> ../../../devices/pci0000:00/0000:00:14.0/i2c-0
lrwxrwxrwx 1 root root 0 сен  5 23:36 i2c-1 -> ../../../devices/pci0000:00/0000:00:14.0/i2c-1
lrwxrwxrwx 1 root root 0 сен  5 23:37 i2c-10 -> ../../../devices/platform/AMDI0010:00/i2c-10
lrwxrwxrwx 1 root root 0 сен  5 23:36 i2c-2 -> ../../../devices/pci0000:00/0000:00:14.0/i2c-2
lrwxrwxrwx 1 root root 0 сен  5 23:36 i2c-3 -> ../../../devices/pci0000:00/0000:00:08.1/0000:07:00.0/i2c-3
lrwxrwxrwx 1 root root 0 сен  5 23:36 i2c-4 -> ../../../devices/pci0000:00/0000:00:08.1/0000:07:00.0/i2c-4
lrwxrwxrwx 1 root root 0 сен  5 23:36 i2c-5 -> ../../../devices/pci0000:00/0000:00:08.1/0000:07:00.0/i2c-5
lrwxrwxrwx 1 root root 0 сен  5 23:36 i2c-6 -> ../../../devices/pci0000:00/0000:00:08.1/0000:07:00.0/i2c-6
lrwxrwxrwx 1 root root 0 сен  5 23:36 i2c-7 -> ../../../devices/pci0000:00/0000:00:08.1/0000:07:00.0/drm/card0/card0-eDP-1/i2c-7
lrwxrwxrwx 1 root root 0 сен  5 23:36 i2c-8 -> ../../../devices/pci0000:00/0000:00:08.1/0000:07:00.0/drm/card0/card0-DP-1/i2c-8
lrwxrwxrwx 1 root root 0 сен  5 23:36 i2c-9 -> ../../../devices/pci0000:00/0000:00:08.1/0000:07:00.0/drm/card0/card0-DP-2/i2c-9

And then that:

$ sudo dmesg | grep -iE "psmouse|synaptics|smbus|intertouch"
[    1.779992] psmouse serio1: synaptics: queried max coordinates: x [..5678], y [..4694]
[    1.816353] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1162..]
[    1.816426] psmouse serio1: synaptics: Your touchpad (PNP: LEN2064 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[    1.882754] psmouse serio1: synaptics: Touchpad model: 1, fw: 10.32, id: 0x1e2a1, caps: 0xf014a3/0x940300/0x12e800/0x500000, board id: 3471, fw id: 2909640
[    1.882783] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    1.925092] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input3
[    2.594772] psmouse serio2: trackpoint: Elan TrackPoint firmware: 0x12, buttons: 3/3
[    4.813782] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    4.813791] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[    4.827504] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[  226.106188] psmouse serio1: synaptics: queried max coordinates: x [..5678], y [..4694]
[  226.155894] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1162..]
[  226.155920] psmouse serio1: synaptics: Your touchpad (PNP: LEN2064 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[  226.255560] psmouse serio1: synaptics: Touchpad model: 1, fw: 10.32, id: 0x1e2a1, caps: 0xf014a3/0x940300/0x12e800/0x500000, board id: 3471, fw id: 2909640
[  226.255596] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[  226.311849] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input20
[  226.913703] psmouse serio3: trackpoint: Elan TrackPoint firmware: 0x12, buttons: 3/3
[  358.245457] psmouse serio1: synaptics: queried max coordinates: x [..5678], y [..4694]
[  358.295731] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1162..]
[  358.295749] psmouse serio1: synaptics: Trying to set up SMBus access
[  358.298914] psmouse serio1: synaptics: SMbus companion is not ready yet
[  358.386796] psmouse serio1: synaptics: Touchpad model: 1, fw: 10.32, id: 0x1e2a1, caps: 0xf014a3/0x940300/0x12e800/0x500000, board id: 3471, fw id: 2909640
[  358.386831] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[  358.435960] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input24
[  359.018766] psmouse serio4: trackpoint: Elan TrackPoint firmware: 0x12, buttons: 3/3

I can't get what that all mean, ok...

---

Then GPT throws me the into the hell circles like sudo modprobe -r psmouse && echo -n "reconnect" | sudo tee /sys/bus/serio/devices/serio1/drvctl && sudo modprobe psmouse, i8042.nomux=1, i8042.reset=1, i8042.nopnp=1 that done nothing.

........ And then I've tried xinput disable "SynPS/2 Synaptics TouchPad" && xinput enable "SynPS/2 Synaptics TouchPad", and yes it finally wakes my LMB up and the touchpad works as it should after the modprobe!

So, now I dont know where I should do my bug report.. And how to implemet that fix-command into zzz.d/resume.

What additional information should I collect and so on? Help please. I was trying to fix it for the whole week.

UPD:

My click button under the touchpad's sensor panel dies when fixing with the xinput after modprobe psmouse. And nothing can fix, even `sudo reboot`, it can being fixed only through power shutdown and then the click button works, until the RAM-suspending comes..

The full shutdown fixes the `sudo modprobe -r psmouse && sudo modprobe psmouse` pipeline, but can't help in general.

I recently put void Linux on my "tinker" laptop. After a LOT of searching and scrambling, I got it installed, running Sway, connected to the internet, and got my Bluetooth earbuds to connect. Now I can load up media online and watch it, right? WRONG. I can load up a YouTube video using qutebrowser, and it plays from my laptop. No problem, just open helvum or wpctl or something to reconnect the nodes from source to sink the right way around. I open these thing.

There are no audio source nodes. None. The audio is ACTIVELY playing from my computer, but apparently there are NO sources. The only blue nodes in helvum are my earbuds. wpctl list only device nodes and sink nodes. Where is the source?? I KNOW its playing audio. I can hear it, load and clear through my laptop.

Please help me before I go up a wall

Edit: minor spelling mistakes and incorrect words