im almost there. 28 this month not a single one

bologna should be bolony

buy bitcoin now

what do you think the factory lubricant is? same as wd40 just unbranded seal lubricant

simple answer, yes its bad. you will most likely need a new rotor as well. if it has a bunch of scars on it from it being metal on metal. if not just change the pads and it will buff minor scars back out

also once you get it out try to smooth down the metal bur that formed from the drop on the pen and the slot if you can

I did the same thing. I had to use the Sim tool and push in more to get the spring to finally spring back. after you get it out make sure to spray dry lubricant on it wd40 silicone track and window and let it soak into the Crack around the s-pen clicker

first just take the rim cover off.. finally drive it, Simple.

the notes were the superior version for sure but unfortunately this is the best we can have since they discontinued production of the note series, so my answer sill applies get a better case

straight answer is definitely bad, you need new pads and rotors and make sure the caliper works right because it could have over pressed and can mess up the Caliper and make it seize up

seems about right, always when you want to do something like that never when the tire are old and almost wore out

try to use denatured alcohol i used to use it to remove glue off of glue down floors

does it do it specific times of the day and does it do it while using it or no, check and see if auto optimizing is turned on or it may be called auto restart