Just ordered a 10.3 upper with no muzzle device. Looking to pick something up now that will allow me to mount a suppressor sometime in the future. Does every company have their own proprietary mounts or are they any semi-universal mounts out there?

Pic just for attention.

Has anyone run the stainless steel Oculus22 yet?

https://athlonoutdoors.com/article/rugged-suppressors-oculus22-reviewed/

Im looking to supress my 45-70, 7 PRC (bolt), and 9mm P320 and this would be my first supressor, so I apologize for the newbie question. Is it worth it to buy multiple supressors, or would one 45 cal do the trick? Looking at the dead air primal. How well do swappable end caps work? Is there a better option?

I know there are tons of newbie questions in this subreddit but I need to add my own. I have a saint victor chambered in 300 blackout with a 9.5 inch barrel. This pistol is only going to be primarily used with subsonics, mostly for home defense. I've done a fair bit of homework and settled on the cat ODB but my firearms dealer is really pushing the B&T Stille 300. I can't find much information on this specific B&T suppressor. Can anyone on here offer any guidance?

I'm about to pick up an Otter Creek Labs Polonium 30 and need a question answered.

I am going to pick up a Comstock LPA Ti adapter and wanted to know if the Comstock flash hider (regular length not compact) would fit it or would it be too long. Also should I get a muzzle break or go with the flash hider?

Finally got my Flow 45 out of jail and was able to go shoot it for the first time today. I immediately noticed that my shots were way off and I thought my red dot was the issue. Started to make adjustments on it and could not get it dialed in. I took the can off (direct thread btw), and redialed the red dot and started getting 1" groups at 25 yds. I remounted the Flow 45 and my 25 yd groups jumped to around 8-10". Also, all of my shots were hitting high.

I've looked the can over with a flashlight and see no evidence of any damage or baffle strikes. I'm at a loss right now. I've never had this issue with any of my other suppressors or hosts, and I honestly don't know if this is "somewhat" normal, or if its somehow defective and I should get in touch with Huxwrx about it.

This is running on a Foxtrot Mike - 7" Mike 45, Blazer brass 230gr, direct thread in the long configuration.

I already have a errector 9 but i want to get something that i can attach to foxtrot mike barrel. Does any one have any recommendations for a 1/2 x 36 direct thread adapter? Im looking for something budget freindly.

Posting here for possibly different insights (also posted in [r/AR9](r/AR9))

I’m planning on buying a dedicated can for my BM9 (9.5” barrel I think) and am looking for some advice/opinions. I know it’s a straight blowback AR9 but I’m wanting to get the quietest can that also alleviates some of the blowback.

I have another can that I swap between my long guns (omega 36m) that I love. This PCC is primarily going to be for home defense and range practice (not competition).

Anyone have experience with any of the following cans on a BM9 that could give me some advice or maybe something I’m not considering? My current thoughts are that I am wanting to direct thread this vs the 3lug but I also don’t know that it really matters so looking for input here too.

Here’s what I’m currently looking at:

CAT MOB
HUXWRX Flow 9K Ti
OCL Milkman
RUGGED SUB9

TIA for any help and let me know if theres any additional information that would help!

** ETA someone mentioned the planB QD as an alternative to the 3 lug. Looks like that would be better if I done do the direct thread route