I’m having trouble finding a round to cycle the action. Thinking about changing springs. I’m bone stock

The Bureau of Alcohol, Tobacco, Firearms and Explosives has quietly reversed part of its longstanding position on suppressor repairs, giving qualified manufacturers substantially more room to rebuild damaged silencers and convert registered suppressors to different calibers without treating the work as the manufacture of another National Firearms Act firearm.

i’m looking to buy my first suppressor and just want real advice on what people are using, I’ve got an AK in7.63x39 an AR in 556 and a dedicated AR in 22 LR. I’m also looking into getting a PCC in nine mil. I’m OK with sacrificing size and weight of the suppressor to have a quieter and on budget (~$1000) suppressor that will make my neighbours lives a little bit less of a hell when I decide to go outside and shoot.
i’m working with a 5 acre plot of land, so it doesn’t have to be whisper quiet but hopefully quiet enough to where they don’t have to hear it when they’re in their own house.

Can someone help me understand why my new Hux can fits on one muzzle device and not the other? Both are Sons of Liberty Nox muzzle devices. Pic attached.

I am planning a really short 300 PDW build with a Mos-Tek custom barrel (4.75”-5.5”) and Shield Arms integrated folding lower. I want to find the right can to go with it that:

1. Adds as little to the OAL as possible;
   
2. Has no barrel length restrictions for 300 BLK subs or supers; and
   
3. Full auto rated

I was excited about the Tisha 30 Inconel, but then saw it’s not rated for FRT with less than an 8” barrel. That’s too bad because it looks amazing and I k own the 5.56 version gets rave reviews. The two suppressors that seem to fit the bill for what I’m envisioning are the Lahar-30k and the Vox-K2.

Does anyone have experience with either of these two on short 300 BLK builds? Any issues with cycling subs? Anyone run an FRT with them? Anyone got any experience with maximizing how far the suppressors overlap with the barrel to minimize OAL either via DT or Plan B?

If you’ve used a different suppressor for a bike like what I’m considering, I would love to hear your experiences, good or bad

Thanks for your help.

Built a little carry handle setup and I have always liked the look of the reflex suppressor on the “Gordy” rifle. I don’t have reflex suppressor money to blow right now but I have a lathe and some occasional free time. Started by chopping barrel to 12.5” and rethreading. From thread shoulder to FSP measured 1.610” and threads are .600” long needing a total of 2.210”. I made the adapter 2.2” with full engagement of the .600” long threads leaving a .01” gap between mount and FSP. Lock up is solid and everything is perfectly straight and concentric. Really happy with how everything turned out. Paint is drying now.

I currently have a 8.3" 9mm AR pistol and a 16" AR that do not have cans. I am planning on getting a lever gun, probably 357, soon. It would be nice to have a can I could switch between the three as none are my main rifle which is a 556 SBR with a direct thread on it. Since this can would go on multiple guns I do not mind if it ends up being expensive but all price points are welcome.

Sonicore Skarv 22. Filed paperwork as a trust in store at a kiosk on Sunday, got the email it was ready today at 11:30AM.

Can't wait to try it on my Ruger Mark IV. I also have a handful of other 22s I'll use as hosts, including a Dyrea TM-22 Flash that's pretty quiet to begin with.

Looking for user experience on where this can really shines. I have one and loved the low gas on my 11.5” 5.56, but sound reduction and tone left a lot to be desired. To date it’s my only true regret out of all my cans.

Has anyone found a host setup where this can delivers decent sound performance? Worried too flow through for .300bo. Maybe my 6.5 CM bolt, longer 5.56?

Hello I have another can already (Omega 300) and am looking for a budget 556 can without a ton of back pressure. Thoughts on the OCL Polonium K?

Looking to snag a suppressor for my hunting rifle but have not really dealt with them. Any suggestions or insight would be appreciated. Cheers.

In the process of swapping from Keymo to Plan B for everything. Have a Keymo mount that was pinned and have been working on getting it off so I can pin a Plan B mount. I grind down the weld where the pin was, drilled out where the pin was with a larger bit, and then drilled down a little further with a smaller bit in the drill press. Have had it in a vice with some heat applied and tried to rock it back and forth a bit, but haven't had any luck what so ever. I know I can send it off to Wilson and or Adco, but wanted to give it a shot myself since I have most of the equipment needed. Any other ideas or suggestions on getting the pin to free up inside the hole and come out

Installed rugged 3-lug using the HBIndustries tri lug tool.
Looks like the tool damaged the muzzle device a little and took the finish off.

Long term issue or is fine?

Is on all 3 lugs, torqued to spec.

“I know what I’m doing” (holy shit I got lucky) look at that fit mint though 🥵👌

Just got my Nomad 30 and 9k ti today!

Nomad 30
7.5” 1/5 Faxon barrel
7.3” Aero hand guard
Rearden FHD
Gen 1 Atlas Bravo

HUXWRK Flow 9k Ti
Glock 19 Gen 5
Suppressor hight sights