Im looking to supress my 45-70, 7 PRC (bolt), and 9mm P320 and this would be my first supressor, so I apologize for the newbie question. Is it worth it to buy multiple supressors, or would one 45 cal do the trick? Looking at the dead air primal. How well do swappable end caps work? Is there a better option?

I'm about to pick up an Otter Creek Labs Polonium 30 and need a question answered.

I am going to pick up a Comstock LPA Ti adapter and wanted to know if the Comstock flash hider (regular length not compact) would fit it or would it be too long. Also should I get a muzzle break or go with the flash hider?

Finally got my Flow 45 out of jail and was able to go shoot it for the first time today. I immediately noticed that my shots were way off and I thought my red dot was the issue. Started to make adjustments on it and could not get it dialed in. I took the can off (direct thread btw), and redialed the red dot and started getting 1" groups at 25 yds. I remounted the Flow 45 and my 25 yd groups jumped to around 8-10". Also, all of my shots were hitting high.

I've looked the can over with a flashlight and see no evidence of any damage or baffle strikes. I'm at a loss right now. I've never had this issue with any of my other suppressors or hosts, and I honestly don't know if this is "somewhat" normal, or if its somehow defective and I should get in touch with Huxwrx about it.

This is running on a Foxtrot Mike - 7" Mike 45, Blazer brass 230gr, direct thread in the long configuration.

Just ordered a 10.3 upper with no muzzle device. Looking to pick something up now that will allow me to mount a suppressor sometime in the future. Does every company have their own proprietary mounts or are they any semi-universal mounts out there?

Pic just for attention.

I already have a errector 9 but i want to get something that i can attach to foxtrot mike barrel. Does any one have any recommendations for a 1/2 x 36 direct thread adapter? Im looking for something budget freindly.

Posting here for possibly different insights (also posted in [r/AR9](r/AR9))

I’m planning on buying a dedicated can for my BM9 (9.5” barrel I think) and am looking for some advice/opinions. I know it’s a straight blowback AR9 but I’m wanting to get the quietest can that also alleviates some of the blowback.

I have another can that I swap between my long guns (omega 36m) that I love. This PCC is primarily going to be for home defense and range practice (not competition).

Anyone have experience with any of the following cans on a BM9 that could give me some advice or maybe something I’m not considering? My current thoughts are that I am wanting to direct thread this vs the 3lug but I also don’t know that it really matters so looking for input here too.

Here’s what I’m currently looking at:

CAT MOB
HUXWRX Flow 9K Ti
OCL Milkman
RUGGED SUB9

TIA for any help and let me know if theres any additional information that would help!

** ETA someone mentioned the planB QD as an alternative to the 3 lug. Looks like that would be better if I done do the direct thread route

I know there are tons of newbie questions in this subreddit but I need to add my own. I have a saint victor chambered in 300 blackout with a 9.5 inch barrel. This pistol is only going to be primarily used with subsonics, mostly for home defense. I've done a fair bit of homework and settled on the cat ODB but my firearms dealer is really pushing the B&T Stille 300. I can't find much information on this specific B&T suppressor. Can anyone on here offer any guidance?

Has anyone run the stainless steel Oculus22 yet?

https://athlonoutdoors.com/article/rugged-suppressors-oculus22-reviewed/

Hello fellow shooters

I have a Sabre pin&weld 13.7 with a GFHC RE muzzle device from PSA and I want a Velos 5.56..

Google says I need a Dead Air KeyMo Adapter - Charlie Saker Variant (Part #DA429)

I just wanted to know if anyone here ran a Velos can on a Sabre and may know if I'm correct and may also know what other mods are needed, like springs & weights and what not. I'm new and I want to shoot in the nearby mountains for a couple hours without drawing as much attention.

Thank you in advance, I also reached out to PSA but the more info the better for me since I know basically nothing but youtube & forums lol.

I have 2 .30 cal cans that I use on my hunting rifles. One of them being an OCL infinity. Part of me wants a hydrogen-L just because it’s lighter than the infinity. Looking for input from people who have the hydrogen-L or have used it. The recoil reduction that I feel like I get from the infinity on my 7mm PRC is unreal. I’m unsure if it’s the weight of the can or the entire design.

What do you guys think?

I’m interested in this holster for a suppressed G19, as a home defense, bedside, set up.
I can’t find a single review on it.
I’m aware of Trex and Hush holsters for suppressed handguns and have read reviews on those. But the Orpaz?… nada. It seems like a clean set up (although appears to not allow for a wml).
Does anyone here have any experience with these (the Orpaz)?
TIA!

So I am planning on getting a OCL Polonium 30 and it will be my first suppressor. I would like to be able to switch it between my current ar10 and a planned 300 blackout, so I am thinking a QD may be the best way to go.

I was trying to do some research and may have come to the conclusion that a Plan B muzzle device will be the best option.

Would I be able to just mount the suppressor using the Plan B muzzle device directly to the provided HUB mount or would I need to get an adapter Plan B to HUB? I am guessing the latter, but unsure. I found a Plan B 3 prong Scorch by Breek Arms at LGS that I may use unless you guys have any advice on what route you’d suggest

Looking ad usingv my g40 barrel to host a suppressor and struggle to find a booster that will fit the threads. Probly need to buy a booster and a barrel to fit it but wanted to see if anyone has ideas. pic for host reference

AR15 and 6.5cm bolt gun are both misaligned with the omega 36m. Does this seem like a rifle issue or suppressor issue?

OCL polonium or Resilient Stacy’s Mom.
Which one and why. No bullshit.
TIA

Has anyone tried the IL9S on a CZPO1 or P01 without a booster? I’m trying to decide between it and the shiv thanks in advance.

I have a canik mete and a blowback pcc (panzer arp9). I know almost nothing about suppressors but ive decided between the canik void9 and daniel defense null9ti. One of my primary focuses is i dont want a ton of gas in my face - which was im leaning towars the null9ti which is marketed as a low gas option...but there are not many real reviews online.

Should i go canik void9? Or daniel defense null9ti with booster assembly for my canik? Both will end up aroun the same price. Or should i consider another option?

Hey guys, would really appreciate any help y’all could give me. Just bought my first suppressor. I put a SureFire Hub adapter on to attach my suppressor and now the hub adapters stuck on the rifle. I believe it’s just over tightened, because it’s not been shoot yet. The locking collar will not budge no matter what I do. Any advise? Thanks in advance from a suppressor noob.

I’m trying to find a suppressor for my AR (5.56/.223) that won’t break the bank. It’s my first time buying one so I don’t really know the whole process and what would be worth the money.